Brauer J R, Cendes Z J, Belboff B C, et al. Laminated steel eddy-current loss versus frequency computed using finite elements[J]. IEEE Transactions on Industry Applications, 2000, 36(4): 1132-1137.
[2]
Tavner P J, Anderson A F. Core faults in large generators[J]. IEE Proceedings: Electric Power Applicatios, 2005, 152(6): 1427-1439.
[3]
Lee S B, Kliman G B, Shah M R, et al. Experimental study of inter-laminar detection techniques based on low flux core excitation[J]. IEEE Transactions on Energy Conversion, 2006, 21(1): 85-94.
[4]
Lee S B, Kliman G B, Shah M R, et al. An advanced technique for detecting inter-laminar stator core faults in large electric machines[J]. IEEE Transactions on Industry Applications, 2005, 41(5): 1185-1193.
[5]
Barrera P M dela, Bossio G R, García G O et al. Stator core fault diagnosis for induction motors based on parameters adaptation[C]. IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics & Drives(SDEMPED), 2009: 1-7.
[6]
Romary R, Demian C, Schlupp P, et al. Offline and online methods for stator core fault detection in large generators[J]. IEEE Transactions on Industrial Elec- tronics, 2013, 60(9): 4084-4092.
[7]
Posedel Z. Inspection of stator cores in large machines with a low yoke induction method-measurement and analysis of interlamiation short-circuits[J]. IEEE Transac- tions on Energy Conversion, 2001. 16(1): 81-86.
[8]
Preis K, Bíró O Ti˘car I. FEM analysis of eddy current losses in nonlinear laminated iron cores[J]. IEEE Transactions on Magnetics, 2005, 41(5): 1412- 1415.
[9]
Ren Z. Formulation for eddy-current problems in multiply connected regions[J]. IEEE Transactions on Magnetics, 2002, 38(2): 557-560.
[10]
Biró O, Preis K, Tiěar I. Voltage-driven coils in finite-element formulations using a current vector and a magnetic scalar potential[J]. IEEE Transactions on Magnetics, 2004, 40(2): 1286-1289.
[11]
Albertz D, Henneberger G. Calculation of 3D eddy current fields using both electric and magnetic vector potential in conducting regions[J]. IEEE Transactions on Magnetics, 1998, 34(5): 2644-2647.
[12]
Biró O. Edge element formulations of eddy current problems[J]. Computet Methods in Applied Mechanics and Engineering, 1999, 169(3): 391-405.
[13]
Silva V C. A 3D Finite-element computation of eddy currents and losses in the stator end laminations of large synchronous machines[J]. IEEE Transactions on Magnetics, 1996, 32(3): 1569-1572.
[14]
Li G P, Biró O. Complex representation in nonlinear time harmonic eddy current problems[J]. IEEE Transac- tions on Magnetics, 1998, 34(5): 2625- 2628.
[15]
Bermúdez A, Gómez D, Salgado P. Eddy current in laminated cores and the computation of an equivalent conductivity[J]. IEEE Transactions on Magnetics, 2008, 44(12): 4730-4738.
[16]
Hahne P, Dietz R, Rieth B, et al. Determination of anisotropic equivalent conductivity of laminated cores for numerical computation[J]. IEEE Transactions on Magnetics, 1996, 32(3): 1184-1187.
[17]
Gollee R, Gelach G. An FEM-based method for analysis of the dynamic behavior of AC contactors[J]. IEEE Transactions on Magnetics, 2000, 36(4): 1337-1340.
[18]
Wang J, Lin H, Huang Y, et al. A new formulation of anisotropic equivalent conductivity in laminations[J]. IEEE Transactions on Magnetics, 2011, 47(5): 1378- 1381.
[19]
Silva V C, Meunier G, Foggia A. A 3-D finite computation of eddy currents and losses in laminated iron cores allowing for electric and magnetic anisotropic [J]. IEEE Transactions on Magnetics, 1995, 31(3): 2139-2141.
[20]
Sebeatyén I, Gyimóthy S, Pávó J, et al. Calculation of losses in lmainted ferromagnetic materials[J]. IEEE Transactions on Magnetics, 2004, 40(2): 924-927.
[21]
Muramatsu K, Okitsu T, Fujitsu H, et al. Method of nonlinear magnetic field analysis taking into account eddy current in laminated core[J]. IEEE Transactions on Magnetics, 2004, 40(2): 896-899.
[22]
Ridley G K. Electromagnetic field distortion effects on ELCID tests[C]. Electrical Machines and Drives, 1995: 187-193.
