Wang Gaolin, Yang Rongfeng, Li Gang, et al. Position sensorless control strategy of IPMSM based on high frequency signal injection[J]. Transactions of China Electrotechnical Society, 2013, 27(11): 62-68.
Wang Gaolin, Yang Rongfeng, Yu Yong, et al. Position sensorless control for interior permanent magnet synchronous motor[J]. Proceedings of the CSEE, 2011, 31(30): 93-98.
[5]
Yang Shih Chin,Lorenz Robert D. Comparison of resistance-based and inductance-based self-sensing controls for surface permanent-magnet machines using high-frequency signal injection[J]. IEEE Transactions on Industry Applications, 2012, 48(3): 977-986.
[6]
Koschik S, van Treek D, De Doncker R W. Evaluation of methods for the operation of PMSM without position sensor[C]. Power Electronics and ECCE Asia (ICPE & ECCE), IEEE, 2011: 1250-1256.
[7]
Chen J L, Tseng S K, Liu T H. Implementation of high-performance sensorless interior permanent-magnet synchronous motor control systems using a high- frequency injection technique[J]. IET Electric Power Applications, 2012, 6(8): 533-544.
Liu Ying, Zhou Bo, Feng Ying, et al. A novel sensorless control method of SPMSM at low speed and estimated rotor position error compensation[J]. Transactions of China Electrotechnical Society, 2013, 27(11): 38-45.
[10]
Reigosa David Díaz, GARCÍA Pablo,Briz Fernando, et al. Modeling and adaptive decoupling of high- frequency resistance and temperature effects in carrier- based sensorless control of PM synchronous machines [J]. IEEE Transactions on Industry Applications, 2010, 46(1): 139-149.
[11]
Zhu Z Q, Li Y, Howe D, et al. Compensation for rotor position estimation error due to cross-coupling magnetic saturation in signal injection based sensorless control of PM brushless AC motors[C]. IEEE Electric Machines & Drives Conference, 2007: 208-213.
[12]
Piippo Antti, Hinkkanen Marko, Luomi Jorma. Sen- sorless control of PMSM drives using a combination of voltage model and HF signal injection[C]. IEEE Industry Applications Conference, 2004: 964-970.
[13]
Jianmin Wang, Jianwei Gao. Analysis of position estimation error resulted from filter in carrier signal injection based sensorless control of PMSM[C]. IEEE Electrical Machines and Systems, 2011: 1-6.
[14]
Liu Jiaxi, Ma Mingna, Li Liyi. A position error compensation way for sensorless linear motor drive using high frequency injection[C]. IEEE International Symposium on Electromagnetic Launch Technology, 2012: 1-6.
Zhang Jian, Xu Zhenlin, Wen Xuhui. Study of a novel method of state-estimation and compensation for sensorless PMSM drive system[J]. Transactions of China Electrotechnical Society, 2006, 21(1): 7-11.
Shang Zhe, Zhao Rongxiang, Dou Ruzhen. Research on sensorless control method of PMSM based on an adaptive sliding mode observer[J]. Proceedings of the CSEE, 2007, 27(3): 23-27.
[19]
Foo Gilbert, Rahman M F. Sensorless sliding-mode MTPA control of an IPM synchronous motor drive using a sliding-mode observer and HF signal injection [J]. IEEE Transactions on Industrial Electronics, 2010, 57(4): 1270-1278.
[20]
Accetta Angelo, Cirrincione Maurizio, Pucci Marcello, et al. Sensorless control of PMSM fractional horse- power drives by signal injection and neural adaptive- band filtering[C]. IEEE Transactions on Industrial Electronics, 2012, 59(3): 1355-1366.
[21]
Repecho V, Biel D, Arias A. Enhanced high fre- quency injection algorithm for sensorless sliding mode control PMSM drives[C]. IEEE Multi-Conference on Systems, Signals & Devices (SSD), 2014: 1-6.
