倪红芳. 喷丸对不锈钢焊接接头应力腐蚀开裂影响的研究[D].南京:南京工业大学, 2004 Ni Hongfang.A study on effects of shot-peening on stress corrosion cracking in stainless steel welded joints[D].Nanjing:Nanjing Tech University, 2004(in Chinese)
[2]
张京海, 鲁晓声, 余巍.304不锈钢氩弧焊焊剂的研究[J].材料开发与应用, 2000, 15(6):1-4 Zhang Jinghai, Lu Xiaosheng, Yu Wei.Research on GTAW flux used for 304 stainless steel welding[J].Development and Application of Materials, 2000, 15(6):1-4(in Chinese)
[3]
汤智慧, 陆峰, 张晓云, 等. 航空高强度结构钢及不锈钢防护研究与发展[J].航空材料学报, 2003, 23(z1):261-266 Tang Zhihui, Lu Feng, Zhang Xiaoyun, et al.Development of surface protection for aeronautical high-strength structural steel and stainless steel[J].Journal of Aeronautical Materials, 2003, 23(z1): 261-266(in Chinese)
[4]
Ding J H, Zhang L, Li D P, et al.Corrosion and stress corrosion cracking behavior of 316L austenitic stainless steel in high H2S-CO2-Cl- environment[J].Journal of Materials Science, 2013, 48(10):3708-3715
[5]
张震. 0Cr18Ni9Ti 奥氏体不锈钢焊接接头应力腐蚀行为的研究[J].木工机床, 2002(3):22-26 Zhang Zhen.Study on the strees corrosion cracking behavier of the welded joint of austenicic stainless steel 0Cr18Ni9Ti[J].Technology and Equipment, 2002(3):22-26(in Chinese)
[6]
Wu L F, Li S M, Liu J H, et al.SCC evaluation of ultra-high strength steel in acidic chloride solution[J].Journal of Central South University, 2012, 19(10):2726-2732
[7]
Abedi S S, Abdolmaleki A, Adibi N.Failure analysis of SCC and SRB induced cracking of a transmission oil products pipeline[J]. Engineering Failure Analysis, 2007, 14(1):250-261
[8]
Rokuro N, Takehide Y.Stress corrosion cracking of Cu-30% Zn alloy in Mattson's solutions at pH 7.0 and 10.0 using constant load method:a proposal of SCC mechanism[J].Corrosion Science, 2008, 50(4):1205-1213
[9]
Liu Z Y, Li X G, Du C W, et al.Stress corrosion cracking behavior of X70 pipe steel in an acidic soil environment[J].Corrosion Science, 2008, 50(8):2251-2257
[10]
Cheng Y F. Electrochemical polarization behavior of X70 steel in thin carbonate/bicarbonate solution layers trapped under a disbanded coating and its implication on pipeline SCC[J].Corrosion Science, 2010, 52(7):2511-2518
[11]
Liu Z Y, Li X G, Zhang Y G, et al.Relationship between electrochemical characteristics and SCC of X70 pipeline steel in an acidic soil simulated solution[J].Acta Metallurgica Sinica:English Letters, 2009, 22(1):58-64
[12]
曹福想, 张启礼. 奥氏体不锈钢应力腐蚀裂纹失效分析及对策[J].南方金属, 2008(3):9-11 Cao Fuxiang, Zhang Qili.Failure analysis and precautions of stress-corrosion cracks of austenitic stainless steel components[J].Southern Metals, 2008(3):9-11(in Chinese)
[13]
李晓延, 武传松, 李午申.中国焊接制造领域学科发展研究[J].机械工程学报, 2012, 48(6):19-31 Li Xiaoyan, Wu Chuansong, Li Wushen.Study on the progress of welding science and technology in China[J].Journal of Mechanical Engineering, 2012, 48(6):19-31(in Chinese)
[14]
董宝明, 郭德伦, 张田仓.钛合金焊接结构在先进飞机中的应用及发展[J].航空材料学报, 2003, 23(10):240-243 Dong Baoming, Guo Delun, Zhang Tiancang.Application and development of titanium alloy weldstructure on advanced aircraft[J].Journal of Aeronautical Materials, 2003, 23(10):240-243(in Chinese)
[15]
梁成浩. Ni 对 304 不锈钢焊接接头耐蚀性能的影响[J].腐蚀科学与防护技术, 2000, 12(2):68-71 Liang Chenghao.Effect of nickel on corrosion resistance of type 304 stainless steels welded joints[J].Corrosion Science and Protection Technology, 2000, 12(2):68-71(in Chinese)
[16]
董俊明, 潘希德. 不锈钢焊接接头在 MgCl2 溶液中的应力腐蚀开裂研究[J].西安交通大学学报, 1997, 31(12):49-54 Dong Junming, Pan Xide.The stress corrosion cracking of stainless steel and its welded joints in MgCl2 solution[J].Journal of Xi'an Jiao Tong University, 1997, 31(12):49-54(in Chinese)
[17]
程东亮. 焊接及热处理对2205双相不锈钢焊接接头腐蚀行为的影响[D].镇江:江苏科技大学, 2012 Cheng Dongliang.The effect of welding and heat treatment on the corrosion behavior of 2205 duplex stainless steel welded joints[D].Zhenjiang:Jiangsu University of Science, 2012(in Chinese)
