Shumpert P K. An experimental model investigation of turbofan engine internal exhaust gas mixer configurations[R].AIAA-80-0228,1980
[2]
Frost T H. Practical bypass mixing system for fan jet aero engines[J].Aeronautical Quarterly,1966,17(5):141-160
[3]
Crouch R W, Coughlin C L,Paynter G C.Nozzle exit flow profile shaping for jet noise reduction[J].Journal of Aircraft,1977, 14(9): 860-867
[4]
Power G D, McClure M D,Vinh D. Advanced IR suppressor design using a combined CFD/test approach[R].AIAA-94-3215, 1994
[5]
Kuchar A P, Chamberlin R.Scale model performance test investigation of exhaust system mixers for an energy efficient engine(E3) propulsion system[R].AIAA-80-0229,1980
[6]
Kozlowski H, Kraft G.Experimental evaluation of exhaust mixers for an energy efficient engine[R].AIAA-80-1088,1980
[7]
McComb J G, Parsons S V,Wilson J A.Exhaust system performance improvement for a long-duct nacelle installation for the DC-10[R].AIAA-80-1195,1980
[8]
Abolfadl M A, Sehra A K.Experimental investigation of exhaust system mixers for a high bypass turbofan engine[R].AIAA-93-0022,1993
[9]
刘友宏,杜力伟, 谢翌,等.波瓣凹扇修形对波瓣强迫混合排气系统性能影响[J].科学技术与工程,2013,13(18): 52265233 Liu Youhong,Du Liwei,Xie Yi,et al.Effect of elliptical cut at trailing edge of a lobed mixer on aerodynamic and thermal performance of a turbofan forced mixing exhaust system[J].Science Technology and Engineering,2013,13(18):5226-5233(in Chinese)
[10]
Shan Y, Zhang J Z,Xu L.Numerical investigation of aerodynamic and mixing characteristics of scarfed lobed mixer for turbofan engine exhaust system[J].Transactions of Nanjing University of Aeronautics & Astronautics,2009,26(2):130-136
[11]
潘丞雄,张靖周, 单勇.斜切对抑制引射式波瓣喷管内部流动分离的效果研究[J].航空学报,2013,34(2):255-262 Pan Chengxiong,Zhang Jingzhou,Shan Yong.Research on suppressing flow separation of lobed mixer-ejector by scarfing treatment[J].Acta Aeronautica et Astronautica Sinica,2013, 34(2): 255-262(in Chinese)
[12]
Koutmos P, McGuirk J J.Velocity and turbulence char-acteristics of isothermal lobed mixer flows[J].ASME Journal of Fluids Engineering,1995,117(4):633-638
[13]
Pinker R A, Strange P J R.The noise benefits of forced mixing[R].AIAA-98-2256,1998
[14]
Presz W,Reynolds G. Alternating lobed mixer/ejector concept suppressor,ALMEC suppressor:US,5884472[P].1999-03-23
[15]
Yu S C M, Hou Y,Chan W K.Scarfing and scalloping effects on lobed forced mixer at low-speed conditions[J].Journal of Propulsion and Power,2000,16(3):440-448
[16]
Hu H, Saga T,Kobayashi T.Dual-plane stereoscopic PIV measurements in a lobed jet mixing flow[R].AIAA-2005-443,2005
[17]
Xie Y, Liu Y H.A modified thermal mixing efficiency and its application to lobed mixer nozzle for aero-engines[J].Heat Transfer Research,2011,42(4):317-335
[18]
Belovich V M, Samimy M.Mixing process in a coaxial geometry with a central lobed mixing nozzle[J].AIAA Journal,1997, 35(5): 838-841
