郭万林,于培师.构件三维断裂与疲劳力学及其在航空工程中的应用[J].固体力学学报,2010(5):553-571 Guo Wanlin,Yu Peishi.Three dimensional fracture and fatigue mechanics of structures and its application in aeronautical engineering[J].Chinese Journal of Aeronautics,2010(5):553-571(in Chinese)
[2]
郭万林.复杂环境下的三维疲劳断裂[J].航空学报,2002,23(3):215-220 Guo Wanlin.Three dimensional fatigue fracture in complex environment[J].Acta Aeronautica et Astronautica Sinica,2002,23(3):215-220(in Chinese)
[3]
Newman Jr J C,Raju I S.An empirical stress-intensity factor equation for the surface crack[J].Engineering Fracture Mechanics,1981,15(1):185-192
[4]
Fett T.Estimation of stress intensity factors for semi-elliptical surface cracks[J].Engineering Fracture Mechanics,2000,66(4):349-356
[5]
Wang X,Lambert S B.Stress intensity factors for low aspect ratio semi-elliptical surface cracks in finite-thickness plates subjected to nonuniform stresses[J].Engineering Fracture Mechanics,1995,51(4):517-532
[6]
Wang X,Lambert S B.Stress intensity factors and weight functions for high aspect ratio semi-elliptical surface cracks in finite-thickness plates[J].Engineering Fracture Mechanics,1997,57(1):13-24
[7]
Wang X,Lambert S B.Semi-elliptical surface cracks in finite-thickness plates with built-in ends.I.Stress intensity factor solutions[J].Engineering Fracture Mechanics,2001,68(16):1723-1741
[8]
Wang X,Lambert S B.Semi-elliptical surface cracks in finite-thickness plates with built-in ends.II.Weight function solutions[J].Engineering Fracture Mechanics,2001,68(16):1743-1754
[9]
John R,Rigling B.Effect of height to width ratio on K and CMOD solutions for a single edge cracked geometry with clamped ends[J].Engineering Fracture Mechanics,1998,60(2):147-156
[10]
John R,Kaldon S G,Johnson D A,et al.Weight function for a single edge cracked geometry with clamped ends[J].International Journal of Fracture,1985,72(2):145-158
[11]
Blatt D,John R,Coker D.Stress intensity factor and compliance solutions for a single edge notched specimen with clamped ends[J].Engineering Fracture Mechanics,1994,47(4):521-532
[12]
Jones I S.A wide range weight function for a single edge cracked geometry with clamped ends[J].Ineternational Journal of Fracture,1998,89(1):1-18
[13]
单辉祖.材料力学(II)[M].3版.北京:高等教育出版社,2009:35-71 Shan Huizu.Mechanics of materials(II)[M].3rd ed.Beijng:Higher Education Press,2009:35-71(in Chinese)
[14]
吴志学.表面裂纹疲劳扩展的数值模拟(II)[J].应用力学学报,2007,24(1):42-46 Wu Zhixue.Numercal simulation to surface crack fatigue growth(II)[J].Chinese Journal of Applied Mechanics,2007,24(1):42-46(in Chinese)
林晓斌,Smith R A.应用三维有限单元法计算应力强度因子[J].中国机械工程,1998,9(11):39-42 Lin Xiaobin,Smith R A.Calculation of stress intensity factors using the 3D finite element method[J].China Mechanical Engineering,1998,9(11):39-42(in Chinese)
