辛少波.环氧树脂基复合材料的摩擦磨损性能研究 .天津:天津工业大学材料科学与化学工程学院,2008 Xin Shaobo.Friction and wear properties of epoxy resin matrix composites .Tianjin:School of Material Science and Chemical Engineering,Tianjin Polytechnic University,2008(in Chinese)
[2]
Ding Qingjun,Yang Lin,Zhao Chunsheng.Effect of hardness of frictional materials on properties of ultrasonic motors //Symposium on Piezoelectricity,Acoustic Waves,and Device Applications.Nanjing:IEEE,2008:434-438
[3]
姜勇,张平,尹久仁,等.纳米SiO2与玻璃纤维含量对尼龙6显微硬度的影响[J].高分子材料科学与工程,2009,25(9):54-56 Jiang Yong,Zhang Ping,Yin Jiuren,et al.Effect of the nano-SiO2 and glass fibers content on micro-hardness of Nylon6 composites[J].Polymer Materials Science & Engineering,2009,25(9):54-56(in Chinese)
[4]
胡幼华,高辉,阎逢元,等.纳米ZnO环氧树脂复合材料的力学性能和摩擦学性能[J].摩擦学学报,2003,23(3):216-220 Hu Youhua,Gao Hui,Yan Fengyuan,et al.Tribological and mechanical properties of nano ZnO-filled epoxy resin composites[J].Tribology,2003,23(3):216-220(in Chinese)
[5]
石光,章明秋,容智敏,等.纳米Al2O3填充环氧树脂复合材料的摩擦学性能[J].摩擦学学报,2003,23(3):211-215 Shi Guang,Zhang Mingqiu,Rong Zhimin,et al.Tribological behavior of nanometer Al2O3 filled epoxy resin composites[J].Tribology,2003,23(3):211-215(in Chinese)
刘轶群,范忠庆,马恒怡,等.纳米粉末橡胶在摩擦材料中的应用[J].摩擦密封材料,2003(3):47-51 Liu Yiqun,Fan Zhongqing,Ma Hengyi,et al.Application of rubber nano-powders in frictional materials[J].Friction and Sealing Materials,2003(3):47-51(in Chinese)
陈正年,丁庆军,赵淳生.超声电机用环氧摩擦材料固化动力学研究[J].南京大学学报:自然科学版,2010,46(1):41-46 Chen Zhengnian,Ding Qingjun,Zhao Chunsheng.Studies on cure kinetics of epoxy friction material for ultrasonic motor[J].Journal of Nanjing University:Natural Sciences,2010,46(1):41-46(in Chinese)
[10]
Ghaemy M,Bazzar M,Mighani M.Effect of nanosilica on the kinetics of cure reaction and thermal degradation of epoxy resin[J].Chinese Journal of Polymer Science,2011,29(2):141-148
[11]
Román F,Montserrat S,Hutchinson J M.On the effect of montmorillonite in the curing reaction of epoxy nanocomposites[J].Journal of Thermal Analysis and Calorimetry,2007,87(1):113-118
[12]
栗大超,靳世久,曾周末,等.微型超声波电机接触界面的摩擦学模型与摩擦材料[J].微特电机,2002(1):9-11 Li Dachao,Jin Shijiu,Zeng Zhoumo,et al.Contact interface friction model and friction material of ultrasonic motor[J].Small & Special Machines,2002(1):9-11(in Chinese)
[13]
曲焱炎.超声驱动微摩擦机理分析及各向异性摩擦材料研究 .哈尔滨:哈尔滨工业大学机电工程学院,2009 Qu Yanyan.Analysis of ultrasonic drive micro-friction mechanism and study of anisotropy fricition material .Harbin:School of Mechatronics Engineering,Harbin Institute of Technology,2009(in Chinese)
[14]
Ding Qingjun,Yang Lin,Zhao Chunsheng.Effect of hardness of frictional materials on properties of ultrasonic motors //Symposium on Piezoelectricity,Acoustic Waves,and Device Applications.Nanjing:IEEE,2008:434-438
[15]
姜勇,张平,尹久仁,等.纳米SiO2与玻璃纤维含量对尼龙6显微硬度的影响[J].高分子材料科学与工程,2009,25(9):54-56 Jiang Yong,Zhang Ping,Yin Jiuren,et al.Effect of the nano-SiO2 and glass fibers content on micro-hardness of Nylon6 composites[J].Polymer Materials Science & Engineering,2009,25(9):54-56(in Chinese)
[16]
石光,章明秋,容智敏,等.纳米Al2O3填充环氧树脂复合材料的摩擦学性能[J].摩擦学学报,2003,23(3):211-215 Shi Guang,Zhang Mingqiu,Rong Zhimin,et al.Tribological behavior of nanometer Al2O3 filled epoxy resin composites[J].Tribology,2003,23(3):211-215(in Chinese)
刘轶群,范忠庆,马恒怡,等.纳米粉末橡胶在摩擦材料中的应用[J].摩擦密封材料,2003(3):47-51 Liu Yiqun,Fan Zhongqing,Ma Hengyi,et al.Application of rubber nano-powders in frictional materials[J].Friction and Sealing Materials,2003(3):47-51(in Chinese)
[19]
芦亚萍,孟繁琴,袁云龙.超声波电机研究现状[J].微电机,2005,38(5):75-77 Lu Yaping,Meng Fanqin,Yuan Yunlong.Recent development of ultrasonic motor[J].Micromotors Servo Technique,2005,38(5):75-77(in Chinese)
陈正年,丁庆军,赵淳生.超声电机用环氧摩擦材料固化动力学研究[J].南京大学学报:自然科学版,2010,46(1):41-46 Chen Zhengnian,Ding Qingjun,Zhao Chunsheng.Studies on cure kinetics of epoxy friction material for ultrasonic motor[J].Journal of Nanjing University:Natural Sciences,2010,46(1):41-46(in Chinese)
[22]
周文辉.新型超声波电机原理与应用[J].微电机,2007,40(6):88-90 Zhou Wenhui.Principle and application of new ultrasonic motor[J].Micromotors Servo Technique,2007,40(6):88-90(in Chinese)
[23]
赵增辉,王育平,袁义坤,等.直线超声电机的研究与应用现状[J].电机与控制应用,2008,35(9):1-5 Zhao Zenghui,Wang Yuping,Yuan Yikun,et al.Recent research and applications on linear ultrasonic motor[J].Electric Machines & Control Application,2008,35(9):1-5(in Chinese)
[24]
Ghaemy M,Bazzar M,Mighani M.Effect of nanosilica on the kinetics of cure reaction and thermal degradation of epoxy resin[J].Chinese Journal of Polymer Science,2011,29(2):141-148
[25]
李宝库,郭吉丰,胡敏强,等.超声波电动机技术创新点的设定[J].微特电机,2005(2):33-34 Li Baoku,Guo Jifeng,Hu Minqiang,et al.Technical innovation’s setting about ultrasonic motor[J].Small & Special Machines,2005(2):33-34(in Chinese)
[26]
董迎晖,赵韩,黄康,等.超声波电动机效率问题的研究现状与进展[J].微特电机,2009(10):63-65 Dong Yinghui,Zhao Han,Huang Kang,et al.Review on the research of the ultrasonic motor efficiency[J].Small & Special Electrical Machines,2009(10):63-65(in Chinese)
[27]
Román F,Montserrat S,Hutchinson J M.On the effect of montmorillonite in the curing reaction of epoxy nanocomposites[J].Journal of Thermal Analysis and Calorimetry,2007,87(1):113-118
[28]
曲建俊,齐毓霖,张志谦,等.超声马达摩擦学及其摩擦材料研究进展[J].摩擦学学报,1998,18(1):80-87 Qu Jianjun,Qi Yulin,Zhang Zhiqian,et al.Advances on tribology of ultrasonic motor and its friction materials[J].Tribology,1998,18(1):80-87(in Chinese)
[29]
陈正年,尹育聪,丁庆军,等.UHMW-PE复合材料用于行波型旋转超声电机[J].振动、测试与诊断,2011,31(5):652-654 Chen Zhengnian,Yin Yucong,Ding Qingjun,et al.Crosslink UHMW-PE matrix composite for to traveling wave rotary ultrasonic motor[J].Journal of Vibration,Measurement & Diagnosis,2011,31(5):652-654(in Chinese)
[30]
栗大超,靳世久,曾周末,等.微型超声波电机接触界面的摩擦学模型与摩擦材料[J].微特电机,2002(1):9-11 Li Dachao,Jin Shijiu,Zeng Zhoumo,et al.Contact interface friction model and friction material of ultrasonic motor[J].Small & Special Machines,2002(1):9-11(in Chinese)
[31]
凡玉,丁庆军,赵淳生,等.聚四氟乙烯基超声电机转子摩擦材料性能研究[J].润滑与密封,2011,36(7):36-39 Fan Yu,Ding Qingjun,Zhao Chunsheng,et al.Research on PTFE-based friction materials of ultrasonic motor[J].Lubrication Engineering,2011,36(7):36-39(in Chinese)
[32]
曲焱炎.超声驱动微摩擦机理分析及各向异性摩擦材料研究 .哈尔滨:哈尔滨工业大学机电工程学院,2009 Qu Yanyan.Analysis of ultrasonic drive micro-friction mechanism and study of anisotropy fricition material .Harbin:School of Mechatronics Engineering,Harbin Institute of Technology,2009(in Chinese)
[33]
丁庆军,姚志远,郑伟,等.行波型超声电机定子摩擦材料的研制及其摩擦磨损性能研究[J].摩擦学学报,2007,27(6):578-582 Ding Qingjun,Yao Zhiyuan,Zheng Wei,et al.Experimental study of friction material adhere to the stator of the traveling wave type rotary ultrasonic motor[J].Tribology,2007,27(6):578-582(in Chinese)
