Hazra S,Sabiruddin K,Bandyopadhyay P P.Plasma and HVOF sprayed WC-Co coatings as hard chrome replacement solution[J].Surface Engineering,2012,28(1):37-43
[2]
李志,赵振业.AerMet100钢的研究与发展[J].航空材料学报,2006,26(3):165-270 Li Zhi,Zhao Zhenye.Research and development of AerMet100 steel[J].Journal of Aeronautical Materials,2006,26(3):165-270(in Chinese)
[3]
崔永静,王长亮,汤智慧,等.超音速火焰喷涂WC-17Co涂层微观结构与性能研究[J].材料工程,2011(11):85-88,96 Cui Yongjing,Wang Changliang,Tang Zhihui,et al.Microstructure and performance of WC-17Co coatings fabricated by high velocity oxy-fuel spraying[J].Journal of Materials Engineering,2011(11):85-88,96(in Chinese)
[4]
Sartwell B D,Legg K O,Nardi A,et al.Replacement of chromium electroplating on C-2,E-2,P-3 and C-130 propeller hub components using HVOF thermal spray coatings .ADA422443,2004
[5]
Hazra S,Sabiruddin K,Bandyopadhyay P P.Plasma and HVOF sprayed WC-Co coatings as hard chrome replacement solution[J].Surface Engineering,2012,28(1):37-43
[6]
Sartwell B D,Legg K O,Nardi A,et al.Replacement of chromium electroplating on C-2,E-2,P-3 and C-130 propeller hub components using HVOF thermal spray coatings .ADA422443,2004
[7]
唐曦.基于白光干涉技术的表面粗糙度测量 .哈尔滨:哈尔滨理工大学,2011 Tang Xi.Research on the measurement of surface roughness based on white-light interference .Harbin: Harbin University of Science and Technology,2011(in Chinese)
[8]
Menini R,Salah N B,Nciri R.Stripping methods studies for HVOF WC-10Co-4Cr coating removal[J].Journal of Materials Engineering and Performance,2004,13(2):185-194
[9]
唐曦.基于白光干涉技术的表面粗糙度测量 .哈尔滨:哈尔滨理工大学,2011 Tang Xi.Research on the measurement of surface roughness based on white-light interference .Harbin: Harbin University of Science and Technology,2011(in Chinese)
[10]
Menini R,Salah N B,Nciri R.Stripping methods studies for HVOF WC-10Co-4Cr coating removal[J].Journal of Materials Engineering and Performance,2004,13(2):185-194
[11]
Asla S K,Sohib M H.Effect of grit-blasting parameters on the surface roughness and adhesion strength of sprayed coating[J].Surface and Interface Analysis,2010,42:551-554
[12]
Asla S K,Sohib M H.Effect of grit-blasting parameters on the surface roughness and adhesion strength of sprayed coating[J].Surface and Interface Analysis,2010,42:551-554
[13]
Mohammadia Z,Ziaei-Moayyed A A,Mesgar A S.Grit blasting of Ti-6Al-4V alloy: optimization and its effect on adhesion strength of plasma-sprayed hydroxyapatite coatings[J].Journal of Materials Processing Technology,2007,194:15-23
[14]
Mohammadia Z,Ziaei-Moayyed A A,Mesgar A S.Grit blasting of Ti-6Al-4V alloy: optimization and its effect on adhesion strength of plasma-sprayed hydroxyapatite coatings[J].Journal of Materials Processing Technology,2007,194:15-23
[15]
Watson M.Parameters affecting bond strength and surface roughness in twin-wire arc spray aluminum coatings[J].Advanced Materials & Processes,2010,168(5):46-47
[16]
边洁,葛建华.热喷涂铝过渡层对FEP涂层与钢基体结合强度的影响[J].材料热处理学报,2010,31(8):136-139 Bian Jie,Ge Jianhua.Effect of thermal spraying Al interlayer on bond strength of FEP coating to steel substrate[J].Transactions of Materials and Heat Treatment,2010,31(8):136-139(in Chinese)
[17]
Watson M.Parameters affecting bond strength and surface roughness in twin-wire arc spray aluminum coatings[J].Advanced Materials & Processes,2010,168(5):46-47
[18]
边洁,葛建华.热喷涂铝过渡层对FEP涂层与钢基体结合强度的影响[J].材料热处理学报,2010,31(8):136-139 Bian Jie,Ge Jianhua.Effect of thermal spraying Al interlayer on bond strength of FEP coating to steel substrate[J].Transactions of Materials and Heat Treatment,2010,31(8):136-139(in Chinese)
[19]
张来启,张少杰,曾红杰,等.喷砂预处理对HVOF喷涂TiAl- Nb／NiCrAl涂层结合强度的影响[J].材料热处理学报,2011,32(12):105-109 Zhang Laiqi,Zhang Shaojie,Zeng Hongjie,et al.Effect of grit blasting pre-treatment on bond strength of TiAl-Nb/NiCrAl coatings sprayed by high velocity oxyfuel[J].Transactions of Materials and Heat Treatment,2011,32(12):105-109(in Chinese)
[20]
张来启,张少杰,曾红杰,等.喷砂预处理对HVOF喷涂TiAl- Nb／NiCrAl涂层结合强度的影响[J].材料热处理学报,2011,32(12):105-109 Zhang Laiqi,Zhang Shaojie,Zeng Hongjie,et al.Effect of grit blasting pre-treatment on bond strength of TiAl-Nb/NiCrAl coatings sprayed by high velocity oxyfuel[J].Transactions of Materials and Heat Treatment,2011,32(12):105-109(in Chinese)
[21]
Wang Y Y,Lia C J,Ohmori A.Influence of substrate roughness on the bonding mechanisms of highvelocity oxy-fuel sprayed coatings[J].Thin Solid Films.2005,485: 141-147
[22]
Wang Y Y,Lia C J,Ohmori A.Influence of substrate roughness on the bonding mechanisms of highvelocity oxy-fuel sprayed coatings[J].Thin Solid Films.2005,485: 141-147
[23]
杨晖,潘少明.基体表面粗糙度对涂层结合强度的影响[J].金属铸锻焊技术,2008,37(15):118-121 Yang Hui,Pan Shaoming.Effect of substrate surface roughness on bond strength of coatings[J].Hot Working Technology,2008,37(15):118-121(in Chinese)
[24]
杨晖,潘少明.基体表面粗糙度对涂层结合强度的影响[J].金属铸锻焊技术,2008,37(15):118-121 Yang Hui,Pan Shaoming.Effect of substrate surface roughness on bond strength of coatings[J].Hot Working Technology,2008,37(15):118-121(in Chinese)
[25]
Amp K U,Com E U A,Sakurai M.Bonding strength of adhesives and surface roughness of joined parts[J].Journal of Materials Processing Technology,2002,127(2):178-181
[26]
Amp K U,Com E U A,Sakurai M.Bonding strength of adhesives and surface roughness of joined parts[J].Journal of Materials Processing Technology,2002,127(2):178-181
[27]
蔡继红.利用应力波测定涂层结合强度的研究 .天津:天津大学,2005 Cai Jihong.Research of the measurement for bond strength of coating using stress wave .Tianjin:Tianjin University,2005(in Chinese)
[28]
蔡继红.利用应力波测定涂层结合强度的研究 .天津:天津大学,2005 Cai Jihong.Research of the measurement for bond strength of coating using stress wave .Tianjin:Tianjin University,2005(in Chinese)
[29]
周伟.涂层结合强度的试验研究及有限元分析 .衡阳:南华大学,2005 Zhou Wei.Experimental study and FEM analysis for bond strength of thermal sprayed coating .Hengyang:University of South China,2005(in Chinese)
[30]
宋亚南,徐滨士,王海斗,等.喷涂层结合强度测量方法的研究现状[J].工程与试验,2011,51(4):1-8 Song Yanan,Xu Binshi,Wang Haidou,et al.Research status on measurement methods for spraying coating bonding strength[J].Engineering & Test,2011,51(4):1-8(in Chinese)
[31]
周伟.涂层结合强度的试验研究及有限元分析 .衡阳:南华大学,2005 Zhou Wei.Experimental study and FEM analysis for bond strength of thermal sprayed coating .Hengyang:University of South China,2005(in Chinese)
[32]
宋亚南,徐滨士,王海斗,等.喷涂层结合强度测量方法的研究现状[J].工程与试验,2011,51(4):1-8 Song Yanan,Xu Binshi,Wang Haidou,et al.Research status on measurement methods for spraying coating bonding strength[J].Engineering & Test,2011,51(4):1-8(in Chinese)
[33]
王军,田春英,武淑艳,等.涂层结合强度研究现状与发展[J].焊接,2010(11):19-23 Wang Jun,Tian Chunying,Wu Shuyan,et al.Research status and development of coating bonding strength[J].Welding & Joining,2010(11):19-23(in Chinese)
[34]
王军,田春英,武淑艳,等.涂层结合强度研究现状与发展[J].焊接,2010(11):19-23 Wang Jun,Tian Chunying,Wu Shuyan,et al.Research status and development of coating bonding strength[J].Welding & Joining,2010(11):19-23(in Chinese)
[35]
HB 7751-2004 爆炸喷涂涂层结合强度试验方法[S] HB 7751-2004 Testing method for the bonding strength for the coating made by detonation-gun spraying [S] (in Chinese)
[36]
HB 7751-2004 爆炸喷涂涂层结合强度试验方法[S] HB 7751-2004 Testing method for the bonding strength for the coating made by detonation-gun spraying [S] (in Chinese)
[37]
Sen D,Chavan N M,Rao D S,et al.Influence of grit blasting on the roughness and the bond strength of detonation sprayed coating[J].Journal of Thermal Spray Technology,2010,19(4):805-815
[38]
Sen D,Chavan N M,Rao D S,et al.Influence of grit blasting on the roughness and the bond strength of detonation sprayed coating[J].Journal of Thermal Spray Technology,2010,19(4):805-815
[39]
Amada S,Hirose T.Influence of grit blasting pre-treatment on the adhesion strength of plasma sprayed coatings: fractal analysis of roughness[J].Surface and Coatings Technology,1998,102(1/2): 132-137
[40]
Amada S,Hirose T.Influence of grit blasting pre-treatment on the adhesion strength of plasma sprayed coatings: fractal analysis of roughness[J].Surface and Coatings Technology,1998,102(1/2): 132-137
