虞跨海, 李立州, 岳珠峰.基于解析及特征造型的涡轮冷却叶片参数化设计[J].推进技术, 2007, 28(6):637-640 Yu Kuahai, Li Lizhou, Yue Zhufeng.Parametric design for cooling turbine blades based on analytic and feature modeling[J].Journal of Propulsion Technology, 2007, 28(6):637-640(in Chinese)
[2]
倪萌, 朱惠人, 裘云, 等.航空发动机涡轮叶片冷却技术综述[J].燃气轮机技术, 2005, 18(4):25-33 Ni Meng, Zhu Huiren, Qiu Yun, et al.Review of aero-turbine blade cooling technologies[J].Gas Turbine Technology, 2005, 18(4):25-33(in Chinese)
[3]
王仲奇, 郑严.叶轮机械弯扭叶片的研究现状及发展趋势[J].中国工程科学, 2000, 2(6):40-48 Wang Zhongqi, Zheng Yan.Research status and development of the bowed-twisted blade for turbomachines[J].Engineering Science, 2000, 2(6):40-48(in Chinese)
[4]
王雷, 胡松岩.动力涡轮弯扭导向叶片的设计[J].航空发动机, 2001(4):6-10 Wang Lei, Hu Songyan. Design of the bowed-twisted guided blade in power turbine[J].Aero Engine, 2001(4):6-10(in Chinese)
[5]
宋玉旺, 席平.基于特征造型技术的涡轮叶片参数化设计[J].北京航空航天大学学报, 2004, 30(4):321-324 Song Yuwang, Xi Ping.Parametric design of turbine blade based on feature modeling[J].Journal of Beijing University of Aeronautics and Astronautics, 2004, 30(4):321-324(in Chinese)
[6]
朱谦, 宁涛, 席平.基于引导线的涡轮气冷叶片伸根建模方法[J].北京航空航天大学学报, 2012, 38(8):1085-1089 Zhu Qian, Ning Tao, Xi Ping.Root extending section of turbine blade modeling method based on guide curves[J].Journal of Beijing University of Aeronautics and Astronautics, 2012, 38(8) :1085-1089(in Chinese)
[7]
Yu K, Yue Z, Wang J.Parametric modeling and multidisciplinary design optimization of 3-D internally cooled turbine blades[R].AIAA-2007-7719, 2007
[8]
Koini G N, Sarakinos S S, Nikolos I K.A software tool for parametric design of turbomachinery blades[J].Advances in Engineering Software, 2009, 40(1):41-51
[9]
Hoschek J, Müller R.Turbine blade design by lofted B-spline surfaces[J].Journal of Computational and Applied Mathematics, 2000, 119(1/2):235-248
[10]
Pérez-Arribas F, Trejo-Vargas I. Computer-aided design of horizontal axis turbine blades[J].Renewable Energy, 2012, 44: 252-260
[11]
田庆, 莫蓉, 夏禹, 等.航空发动机叶片CAD造型方法[J].航空制造技术, 2007(2):78-81 Tian Qing, Mo Rong, Xia Yu, et al.CAD modeling method for aeroengine blade[J].Aircraft Manufacturing Technology, 2007(2):78-81(in Chinese)
[12]
Martin T J.Computer-automated multi-disciplinary analysis and design optimization of internally cooled turbine blades[D].University Park:The Pennsylvania State University, 2001
[13]
虞跨海, 李立州, 岳珠峰.基于解析及特征造型的涡轮冷却叶片参数化设计[J].推进技术, 2007, 28(6):637-640 Yu Kuahai, Li Lizhou, Yue Zhufeng.Parametric design for cooling turbine blades based on analytic and feature modeling[J].Journal of Propulsion Technology, 2007, 28(6):637-640(in Chinese)
[14]
Yu K, Yue Z, Wang J.Parametric modeling and multidisciplinary design optimization of 3-D internally cooled turbine blades[R].AIAA-2007-7719, 2007
[15]
Hoschek J, Müller R.Turbine blade design by lofted B-spline surfaces[J].Journal of Computational and Applied Mathematics, 2000, 119(1/2):235-248
