White C, Denny D, Britain G.The sealing mechanism of flexible packings[M].London:HM Stationery Office, 1948:35-62
[2]
万保中, 姜继海, 闫伟鹏, 等.电液伺服摆动马达动密封摩擦磨损试验研究[J].机床与液压, 2013, 41(21):8-11, 43 Wan Baozhong, Jiang Jihai, Yan Weipeng, et al.Friction wear experimental research on dynamic seal of electro-hydraulic servo swing motor[J].Machine Tool & Hydraulics, 2013, 41(21):8-11, 43(in Chinese)
[3]
金忠, 张将.摆动液压缸组合密封的建模与计算[J].液压与气动, 2007(10):18-21 Jin Zhong, Zhang Jiang.Modeling and calculat ing of composite seals for rotary vane actuator[J].Technology of Hydraulic and Pneumatic, 2007(10):18-21(in Chinese)
[4]
Denny D F.The influence of load and surface roughness on the friction of rubber-like materials[J].Proceedings of the Physical Society, Section B, 1953, 66(9):721-727
[5]
Denny D F.Time effects in the static friction of lubricated rubber[J].Wear, 1959, 2(4):264-272
[6]
White C, Denny D, Britain G.The sealing mechanism of flexible packings[M].London:HM Stationery Office, 1948:35-62
[7]
Hooke C, O′Donoghue J.Elastohydrodynamic lubrication of soft, highly deformed contacts[J].Journal of Mechanical Engineering Science, 1972, 14(1):34-48
[8]
Denny D F.The influence of load and surface roughness on the friction of rubber-like materials[J].Proceedings of the Physical Society, Section B, 1953, 66(9):721-727
[9]
Fazekas G A.On reciprocating toroidal seals[J].Journal of Engineering for Industry, 1976, 98(3):783-787
[10]
Hooke C, O′Donoghue J.Elastohydrodynamic lubrication of soft, highly deformed contacts[J].Journal of Mechanical Engineering Science, 1972, 14(1):34-48
[11]
Nikas G K.Elastohydrodynamics and mechanics of rectangular elastomeric seals for reciprocating piston rods[J].Journal of Tribology, 2003, 125(1):60-69
[12]
Nikas G K.Theoretical study of solid back-up rings for elastomeric seals in hydraulic actuators[J].Tribology International, 2004, 37(9):689-699
[13]
Hirano F, Kaneta M.Theoretical investigation of friction and sealing characteristics of flexible seals for reciprocating motion[C]//Proceedings of the 5th International Conference on Fluid sealing, 1971:17-32
[14]
Fazekas G A.On reciprocating toroidal seals[J].Journal of Engineering for Industry, 1976, 98(3):783-787
[15]
Nikas G K, Sayles R S.Computational model of tandem rectangular elastomeric seals for reciprocating motion[J].Tribology International, 2006, 39(7):622-634
[16]
Nikas G K, Sayles R S.Modelling and optimization of composite rectangular reciprocating seals[J].Proceedings of the Institution of Mechanical Engineers, Part J:Journal of Engineering Tribology, 2006, 220(4):395-412
[17]
Nikas G K.Elastohydrodynamics and mechanics of rectangular elastomeric seals for reciprocating piston rods[J].Journal of Tribology, 2003, 125(1):60-69
[18]
Nikas G K.Theoretical study of solid back-up rings for elastomeric seals in hydraulic actuators[J].Tribology International, 2004, 37(9):689-699
[19]
张付英, 刘卉, 张林静.液压往复密封理论, 技术与应用的进展研究[J].润滑与密封, 2007, 32(3):194-201 Zhang Fuying, Liu Hui, Zhang Linjing.The evolution study of theories——technologies and application of hydraulic reciprocating seal[J].Lubrication Engineering, 2007, 32(3):194-201(in Chinese)
[20]
郑辉, 张付英.液压往复密封泄漏量的有限元分析[J].机床与液压, 2011, 39(8):58-61 Zheng Hui, Zhang Fuying.Finite element analysis of leakage for hydraulic reciprocating seal[J].Machine Tool & Hydraulics, 2011, 39(8):58-61(in Chinese)
[21]
Nikas G K, Sayles R S.Computational model of tandem rectangular elastomeric seals for reciprocating motion[J].Tribology International, 2006, 39(7):622-634
[22]
李树立, 焦宗夏.叶片式摆动液压马达泄漏计算与控制[J].液压与气动, 2005(11):67-68 Li Shuli, Jiao Zongxia.Leakage calculation and control of vane hydraulic swing motor[J].Technology of Hydraulic and Pneumatic, 2005(11):67-68(in Chinese)
[23]
万保中, 姜继海, 闫伟鹏, 等.电液伺服摆动马达动密封摩擦磨损试验研究[J].机床与液压, 2013, 41(21):8-11, 43 Wan Baozhong, Jiang Jihai, Yan Weipeng, et al.Friction wear experimental research on dynamic seal of electro-hydraulic servo swing motor[J].Machine Tool & Hydraulics, 2013, 41(21):8-11, 43(in Chinese)
[24]
Yao J, Jiao Z, Han S.Friction compensation for low velocity control of hydraulic flight motion simulator:a simple adaptive robust approach[J].Chinese Journal of Aeronautics, 2013, 26(3): 814-822
[25]
金忠, 张将.摆动液压缸组合密封的建模与计算[J].液压与气动, 2007(10):18-21 Jin Zhong, Zhang Jiang.Modeling and calculat ing of composite seals for rotary vane actuator[J].Technology of Hydraulic and Pneumatic, 2007(10):18-21(in Chinese)
[26]
Bhaumik S, Kumaraswamy A, Guruprasad S.Design & development of test rig for investigation of contact mechanics phenomena in reciprocating hydraulic seals[J].Procedia Engineering, 2013, 64:835-843
[27]
Liyanage M H, Krouglicof N, Gosine R.Design and control of a high performance SCARA type robotic arm with rotary hydraulic actuators[C]//Canadian Conference on Electrical and Computer Engineering.Piscataway, NJ:IEEE, 2009:827-832
[28]
Hirano F, Kaneta M.Theoretical investigation of friction and sealing characteristics of flexible seals for reciprocating motion[C]//Proceedings of the 5th International Conference on Fluid sealing, 1971:17-32
[29]
Denny D F.Time effects in the static friction of lubricated rubber[J].Wear, 1959, 2(4):264-272
[30]
Nikas G K, Sayles R S.Modelling and optimization of composite rectangular reciprocating seals[J].Proceedings of the Institution of Mechanical Engineers, Part J:Journal of Engineering Tribology, 2006, 220(4):395-412
[31]
崔晓, 董彦良, 赵克定.基于 ADINA 的组合式动密封泄漏量与摩擦力计算术[J].华南理工大学学报:自然科学版, 2010, 38(2):95-100 Cui Xiao, Dong Yanliang, Zhao Keding.Calculation of leakage and friction of combined dynamic seals based on ADINA[J].Journal of South China University of Technology:Natural Science Edition, 2010, 38(2):95-100(in Chinese)
[32]
张付英, 刘卉, 张林静.液压往复密封理论, 技术与应用的进展研究[J].润滑与密封, 2007, 32(3):194-201 Zhang Fuying, Liu Hui, Zhang Linjing.The evolution study of theories——technologies and application of hydraulic reciprocating seal[J].Lubrication Engineering, 2007, 32(3):194-201(in Chinese)
[33]
郑辉, 张付英.液压往复密封泄漏量的有限元分析[J].机床与液压, 2011, 39(8):58-61 Zheng Hui, Zhang Fuying.Finite element analysis of leakage for hydraulic reciprocating seal[J].Machine Tool & Hydraulics, 2011, 39(8):58-61(in Chinese)
[34]
李树立, 焦宗夏.叶片式摆动液压马达泄漏计算与控制[J].液压与气动, 2005(11):67-68 Li Shuli, Jiao Zongxia.Leakage calculation and control of vane hydraulic swing motor[J].Technology of Hydraulic and Pneumatic, 2005(11):67-68(in Chinese)
[35]
Nikas G K, Burridge G, Sayles R S.Modelling and optimization of rotary vane seals[J].Proceedings of the Institution of Mechanical Engineers, Part J:Journal of Engineering Tribology, 2007, 221(6):699-715
[36]
Karaszkiewicz A.Geometry and contact pressure of an O-ring mounted in a seal groove[J].Industrial & Engineering Chemistry Research, 1990, 29(10):2134-2137
[37]
崔晓, 董彦良, 赵克定.基于 ADINA 的组合式动密封泄漏量与摩擦力计算术[J].华南理工大学学报:自然科学版, 2010, 38(2):95-100 Cui Xiao, Dong Yanliang, Zhao Keding.Calculation of leakage and friction of combined dynamic seals based on ADINA[J].Journal of South China University of Technology:Natural Science Edition, 2010, 38(2):95-100(in Chinese)
Nikas G K, Burridge G, Sayles R S.Modelling and optimization of rotary vane seals[J].Proceedings of the Institution of Mechanical Engineers, Part J:Journal of Engineering Tribology, 2007, 221(6):699-715
Karaszkiewicz A.Geometry and contact pressure of an O-ring mounted in a seal groove[J].Industrial & Engineering Chemistry Research, 1990, 29(10):2134-2137
[42]
Müller H K, Nau B S.Fluid sealing technology:principles and applictions[M].Boca Raton:CRC Press, 1998:54-81
