Shi D Q, Gao G L,Gao Z W,et al.Application of expert fuzzy PID method for temperature control of heating furnace[J].Procedia Engineering,2012,29:257-261
[2]
吴大方,潘兵, 高镇同,等.超高温、大热流、非线性气动热环境试验模拟及测试技术研究[J].实验力学,2012,27(3):255-271 Wu Dafang,Pan Bing,Gao Zhentong,et al.On the experimental simulation of ultra-high temperature, high heat flux, and nonlinear aerodynamic heating environment and thermal-mechanical testing technique[J].Journal of Experimental Mechanics,2012,27(3):255-271(in Chinese)
[3]
Hu L, Long W,Nie Z K.Development of PID neural network control system for temperature of resistance furnace[C]//2009 International Forum on Information Technology and Applications.Piscataway,NJ:IEEE Computer Society,2009,3:205-208
[4]
吴大方,潘兵, 高镇同,等.超高温、大热流、非线性气动热环境试验模拟及测试技术研究[J].实验力学,2012,27(3):255-271 Wu Dafang,Pan Bing,Gao Zhentong,et al.On the experimental simulation of ultra-high temperature, high heat flux, and nonlinear aerodynamic heating environment and thermal-mechanical testing technique[J].Journal of Experimental Mechanics,2012,27(3):255-271(in Chinese)
[5]
Grzesiak L M, Tarczewski T.PMSM servo-drive control system with a state feedback and a load torque feedforward compensation[J].COMPEL-The International Journal for Computation and Mathematics in Electrical and Electronic Engineering,2013, 32(1): 364-382
[6]
Seokmin H, Yonghwan O,Doik K,et al.Real-time walking pattern generation method for humanoid robots by combining feedback and feedforward controller[J].IEEE Transactions on Industrial Electronics,2014,61(1):355-364
[7]
袁赣南,谭佳琳, 周颋.顺馈-反馈技术在船舶姿态控制中的应用[J].系统仿真学报,2009,21(17):5524-5527 Yuan Gannan,Tan Jialin,Zhou Ting.Application of feedforward-feedback control in control model of ship motion[J].Journal of System Simulation,2009,21(17):5524-5527(in Chinese)
[8]
Grzesiak L M, Tarczewski T.PMSM servo-drive control system with a state feedback and a load torque feedforward compensation[J].COMPEL-The International Journal for Computation and Mathematics in Electrical and Electronic Engineering,2013, 32(1): 364-382
[9]
Seokmin H, Yonghwan O,Doik K,et al.Real-time walking pattern generation method for humanoid robots by combining feedback and feedforward controller[J].IEEE Transactions on Industrial Electronics,2014,61(1):355-364
[10]
袁赣南,谭佳琳, 周颋.顺馈-反馈技术在船舶姿态控制中的应用[J].系统仿真学报,2009,21(17):5524-5527 Yuan Gannan,Tan Jialin,Zhou Ting.Application of feedforward-feedback control in control model of ship motion[J].Journal of System Simulation,2009,21(17):5524-5527(in Chinese)
[11]
牛国臣,王巍, 魏志强,等.基于力矩前馈和舵机角度补偿的力矩控制[J].北京航空航天大学学报,2013,39(3):300-304 Niu Guochen,Wang Wei,Wei Zhiqiang,et al.Torque control based on torque feedforward and rudder angle compensation[J].Journal of Beijing University of Aeronautics and Astronautics,2013,39(3): 300-304(in Chinese)
[12]
敖雯青,王寿增, 张晋.电阻式加热炉温度控制数理模型研究[J].工业炉,2012,34(1):36-39 Ao Wenqing,Wang Shouzeng,Zhang Jin.Study on mathematical model of temperature control of resistance furnace[J].Industrial Furnace,2012,34(1):36-39(in Chinese)
[13]
李金堂,樊润洁. 一种无超调钝角拐点的PID温控设计[J]. 电子设计工程,2010,18(8):82-85 Li Jintang,Fan Runjie.A design of PID temperature control without superscale obtuse angle and inflexion[J].Electronic Design Engineering,2010,18(8):82-85(in Chinese)
[14]
李金堂,樊润洁. 一种无超调钝角拐点的PID温控设计[J]. 电子设计工程,2010,18(8):82-85 Li Jintang,Fan Runjie.A design of PID temperature control without superscale obtuse angle and inflexion[J].Electronic Design Engineering,2010,18(8):82-85(in Chinese)
[15]
Shi D Q, Gao G L,Gao Z W,et al.Application of expert fuzzy PID method for temperature control of heating furnace[J].Procedia Engineering,2012,29:257-261
[16]
Hu L, Long W,Nie Z K.Development of PID neural network control system for temperature of resistance furnace[C]//2009 International Forum on Information Technology and Applications.Piscataway,NJ:IEEE Computer Society,2009,3:205-208
[17]
牛国臣,王巍, 魏志强,等.基于力矩前馈和舵机角度补偿的力矩控制[J].北京航空航天大学学报,2013,39(3):300-304 Niu Guochen,Wang Wei,Wei Zhiqiang,et al.Torque control based on torque feedforward and rudder angle compensation[J].Journal of Beijing University of Aeronautics and Astronautics,2013,39(3): 300-304(in Chinese)
[18]
敖雯青,王寿增, 张晋.电阻式加热炉温度控制数理模型研究[J].工业炉,2012,34(1):36-39 Ao Wenqing,Wang Shouzeng,Zhang Jin.Study on mathematical model of temperature control of resistance furnace[J].Industrial Furnace,2012,34(1):36-39(in Chinese)
