Nader A. On strength,stiffness and dent resistance of car body panels[J].Journal of Material Process Technology,1995,49(1/2):13-31
[2]
李东升,周贤宾. 双曲扁壳覆盖件抗凹性的定量评估[J].机械工程学报,1998,34(1):69-74 Li Dongsheng,Zhou Xianbin.Evaluation on sinking resistance of double curvature auto-body panels[J].Chinese Journal of Mechanical Engineering,1998,34(1):69-74(in Chinese)
[3]
李雪峰. 汽车板板材抗凹性试验方法理论分析和数值模拟研究[D].北京:北京航空航天大学,2001 Li Xuefeng.Dent resistance testing methods and simulation analysis of automotive panels[D].Beijing:Beijing University of Aeronautics and Astronautics,2001(in Chinese)
[4]
Holmberg S, Thilderkvist P.Influence of material and stamping conditions on the stiffness and static dent resistance of automotive panels[J].Material Design,2002,23(8):681-691
[5]
Holmberg S, Nejabat B.Numerical assessment of stiffness and dent properties of automotive exterior panels[J].Material Design,2004,25(5):361-368
[6]
Zhang Y, Lai X M,Zhu P,et al.Lightweight design of automobile component using high strength steel based on dent resistance[J].Materials Design,2006,27(1):64-68
[7]
Lu H Z, Ma M T,You J H,et al.Dent resistance for automobile body panels[J].Chinese Journal of Mechanical Engineering,2009,22(6):903-911
[8]
张毅,李东升, 周贤宾.双曲扁壳覆盖件静态抗凹性数值模拟研究[J].塑性工程学报,2003,10(6):34-37 Zhang Yi,Li Dongsheng,Zhou Xianbin.The numerical simulation of double-curved autobody panel's static dent resistance[J].Journal of Plasticity Engineering,2003,10(6):34-37(in Chinese)
[9]
Javad M. Thickness and material yield strength effects of thin sheets on dent resistance[J].Wseas Transactions on Applied and Theoretical Mechanics,2007,2(6):127-131
[10]
Li Y, Wang Z J.Finite element analysis of stiffness and static dent resistance of aluminum alloy double-curved panel in viscous pressure forming[J].Transactions of Nonferrous Metals Society of China,2009,19(S2):312-317
[11]
Zeng D, Xia Z C.A comparative study of dent resistance incorporating forming effects[R].SAE Technical Paper 2005-01-0089,2005
[12]
Ekstrand G, Asnafi N.On testing of the stiffness and dent resistance of autobody panels[J].Material Design,1998,19(4):145-156
[13]
李东升,周贤宾, 吕晓东,等 汽车板抗凹性评价体系及试验机系统[J].北京航空航天大学学报,2003,29(5):467-470 Li Dongsheng,Zhou Xianbin,Lü Xiaodong,et al.Evaluation system of sinking-resistance for auto-body sheet material[J].Journal of Beijing University of Aeronautics and Astronautic,2003,29(5):467-470(in Chinese)
[14]
汪承璞,俞宁峰, 杨浩源,等.金属板材抗凹性试验的法向加载机构:中国,ZL02261155.X[P].2002-10-31 Wang Chengpu,Yu Ningfeng,Yang Haoyuan,et al.Normal direction loading structure of sheet metal dent resistance test:China,ZL02261155.X[P].2002-10-31(in Chinese)
[15]
汪承璞,俞宁峰, 杨浩源,等.金属板材抗凹性试验的综合测量没备:中国,ZL02261154.1[P].2002-10-31 Wang Chengpu,Yu Ningfeng,Yang Haoyuan,et al.Comprehensive measurement equipment of sheet metal dent resistance test: China,ZL02261154.1[P].2002-10-31(in Chinese)
[16]
Delta Tau Data Systems Inc. PMAC hardware manual PMAC-PC[M].Chatsworth:Delta Tau Data Systems Inc,1998
[17]
Niku S B. Introduction to robotics analysis, systems, application[M].Englewood Cliffs,NJ:Prentice-Hall,2001
