刘丽兰,刘宏昭, 吴子英,等.机械系统中摩擦模型的研究进展[J].力学进展,2008(2):201-211 Liu Lilan,Liu Hongzhao,Wu Ziying,et al.An overview of friction models in mechanical[J].Advances in Mechanics,2008(2):201-211(in Chinese)
[2]
Milwitzky B, Cook F E.Analysis of landing-gear behavior[R].NACA-TR-1154,1953
[3]
飞机设计手册总编委会. 飞机设计手册:起飞着陆系统设计[M].北京:航空工业出版社,2002 The Chief Committee of Aircraft Design Manual.Aircraft design manual:takeoff and landing system design[M].Beijing:Aviation Industry Press,2002(in Chinese)
Curry N S. Aircraft landing gear design: principles and practices[M].Washington,DC:AIAA,1988
[6]
史海文. 摇臂式、支柱式起落架缓冲参数的研究[J].航空学报,1987,8(12):B625-B629 Shi Haiwen.A research in shock parameters of rock arm landing gear and telescopic landing gear[J].Acta Aeronautica et Astronautica Sinica,1987,8(12):B625-B629(in Chinese)
[7]
史海文,张大千, 杨树勋.摇臂式、支柱式起落架起转、回弹载荷系数的落震试验研究[J].飞机设计,2000(1):40-44 Shi Haiwen,Zhang Daqian,Yang Shuxun.A research in spin-up and spring back drag loads coefficient of rock arm landing gear and telescopic landing gear on drop test[J].Aircraft Design,2000(1):40-44(in Chinese)
[8]
陈岩. 运七200A前起落架缓冲器密封装置[J].航空科学技术,1998(3):31-32 Chen Yan.Sealing set of the buffer of the former landing gear for Y7-200A[J].Aeronautical Science and Technology,1998(3): 31-32(in Chinese)
[9]
刘一静, 袁明超,王晓雷.表面织构对发动机活塞/缸套摩擦性能的影响[J].中国矿业大学学报,2009,38(6):866-871 Liu Yijing,Yuan Mingchao,Wang Xiaolei.Influence of the surface texture on the tribological performances of piston skirt/liner[J].Journal of China University of Mining and Technology,2009,38(6):866-871(in Chinese)
[10]
赵士钦, 秘国芳,马力明.活塞表面处理技术综述[J].内燃机配件,2001(6):18-20 Zhao Shiqin,Mi Guofang,Ma Liming.Overview of surface treatment on piston[J].Internal Combustion Engine Parts,2001(6):18-20(in Chinese)
[11]
胡志彪, 李贺军,付前刚,等.低摩擦系数固体润滑涂层研究进展[J].材料工程,2006(3):60-62 Hu Zhibiao,Li Hejun,Fu Qiangang,et al.Research progress on low friction coefficient solid lubricating coatings[J].Journal of Materials Engineering,2006(3):60-62(in Chinese)
[12]
康克家, 杜三明,张永振,等.PTFE复合材料摩擦及改性研究综述[J].润滑与密封,2012,37(6):99-102 Kang Kejia,Du Sanming,Zhang Yongzhen,et al.A summary of study on friction and modification of PTFE composites[J].Lubrication Engineering,2012,37(6):99-102(in Chinese)
[13]
Khoddamzadeh A, Liu R,Wu X J,et al.Novel polytetrafluoro-ethylene (PTFE) composites with newly developed Tribaloy alloy additive for sliding bearings[J].Wear,2008,266(7/8):646-657
[14]
Unal H, Sen U,Mimaroqlu A,et al.Study of abrasive wear vol-ume map for PTFE and PTFE composites[J].Applied Composite Materials,2007,14(5/6):287-306
[15]
Unal H, Mimaroqlu A,Kadioglu U,et al.Sliding friction and wear behaviour of polytetrafluoroethylene and its composites under dry conditions[J].Materials and Design,2004,25(3): 239-245
