全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

压电结构系统机电耦合的强化与多阶共振抑制

DOI: 10.13700/j.bh.1001-5965.2013.0502, PP. 1011-1016

Full-Text   Cite this paper   Add to My Lib

Abstract:

提高压电系统的机电耦合程度可以提高压电分支电路对于结构机械振动的抑制效果.提出了一种可同时提高压电系统多阶模态机电耦合程度、进而实现对系统多阶共振进行控制的方法.首先通过对压电悬臂梁模型的理论研究揭示了将压电片的电极离散、并以不同方式连接可以导致系统的机电耦合程度发生改变的现象.在此基础上导出可刻划此现象的模态机电耦合函数;提出通过对模态机电耦合函数的优化寻求压电片电极的最佳离散方式和最佳连接方式,以获得对应某一模态的最大机电耦合函数值.为了对多阶共振抑制,提出引入选通电路,通过对含有选通电路的模态机电耦合函数的参数优化实现同时提高压电系统多模态机电耦合程度、进而抑制多阶共振的方法.结合数值实例对此方法进行说明.

References

[1]  Hagood N W, von Flotow A.Damping of structural vibrations with piezoelectric materials and passive electrical networks[J].Journal of Sound and Vibration,1991,146(2):243-268
[2]  Crawley E F, de Luis J,Hagood N W,et al.Development of piezoelectric technology for applications in control of intelligent structures[M].Atlanta, GA:IEEE,1988
[3]  Moheimani S O R. A survey of recent innovations in vibration damping and control using shunted piezoelectric[J].IEEE Transactions on Control Systems Technology,2003,11(4): 482- 499
[4]  姚军,李岳锋. 压电薄板的建模和阻尼的准独立模态控制[J].航空学报,2000,21(2):159-163 Yao Jun,Li Yuefeng.Modeling of piezoelectric thin plates and quasi-independent modal control for damping[J].Acta Aeronautica et Astronautica Sinica,2000,21(2):159-163(in Chinese)
[5]  王建军,李其汉. 具有分支电路的可控压电阻尼减振技术[J].力学进展,2003,33(3):389-403 Wang Jianjun,Li Qihan.Recent advances of vibration damping and control using piezoelectric materials with shunted circuits[J].Advances in Mechanics,2003,33(3):389-403(in Chinese)
[6]  陈伟民,管德,李敏,等. 压电驱动器用于薄板型结构振动主动控制研究[J].航空学报,2001,22(2):109-112 Chen Weimin,Guan De,Li Min,et al.Active vibration control of thin plate with piezoelectric actuators[J].Acta Aeronautica et Astronautica Sinica,2001,22(2):109-112(in Chinese)
[7]  Guyomar D, Richard C,Mohammadi S.Semi-passive random vibration control based on statistics[J].Journal of Sound and Vibration,2007,307(3-5):818-833
[8]  Park C H, Inman D J.Enhanced piezoelectric shunt design[J].Shock and Vibration,2003,10(2):127-133
[9]  De Marneffe B, Preumont A.Vibration damping with negative capacitance shunts: theory and experiment[J].Smart Materials and Structures,2008,17(3):35015
[10]  Carlos N E, Kikuchi S.Design of piezoelectric transducers using topology optimization[J].Smart Materials and Structures,1999,8(3):350-364
[11]  Belloli A, Ermanni P.Optimum placement of piezoelectric ceramic modules for vibration suppression of highly constrained structures[J].Smart Materials and Structures,2007,16(5): 1662- 1671
[12]  Liao Y B, Sodano H A.Optimal placement of piezoelectric material on a cantilever beam for maximum piezoelectric damping and power harvesting efficiency[J].Smart Materials and Structures,2012,21(10):105014
[13]  Vasques C M A. Improved passive shunt vibration control of smart piezo-elastic beams using modal piezoelectric transducers with shaped electrodes[J].Smart Materials and Structures,2012,21(12):125003
[14]  Hollkamp J J. Multimodal passive vibration suppression with piezoelectric materials and resonant shunts[J].Journal of Intelligent Material Systems And Structures,1994,5(1):49-58
[15]  Behrens S, Moheimani S O R.Current flowing multiple-mode piezoelectric shunt dampener[C]//Proceedings of SPIE-the International Society for Optical Engineering.Bellingham,WA:SPIE,2002,4697:217-226
[16]  Erturk A, Inman D J.A distributed parameter electromechanical model for cantilevered piezoelectric energy harvesters[J].Journal of Vibration and Acoustics-Transactions of the ASME,2008,130(4):041002-1-15

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133