周济,周艳红.数控加工技术[M].北京:国防工业出版社,2002:46-47 Zhou Ji,Zhou Yanhong.Technology of NC machining[M].Beijing:National Defence Industry Press,2002:46-47(in Chinese)
[2]
Hamakhan I A,Korakianitis T.Aerodynamic performance effects of leading-edge geometry in gas-turbine blades[J].Applied Energy,2010,87(5):1591-1601
[3]
Kim B H,Choi B K.Guide surface based tool path generation in 3-axis milling:an extension of the guide plane method[J].Computer Aided Design,2000,32:191-199
[4]
Lee E.Contour offset approach to spiral tool path generation with constant scallop height[J].Computer Aided Design,2003,35:511-518
[5]
Sun Y W,Guo D M,Jia Z Y.Spiral cutting operation strategy for machining of sculptured surfaces by conformal map approach[J].Journal of Material Process Technology,2006,180:74-82
[6]
Kruth P,Klewais J P.Optimization and dynamic adaptation of the cutter inclination during five-axis milling of sculptured surfaces[J].CIRP Annals,1994,43(1):443-448
[7]
Shan C W,Zhang D H,Liu W W,et al.A novel spiral machining approach for blades modeled with four patches[J].Internal Journal of Advanced Manufacturing Technology,2009,43:563-572
[8]
You C F,Sheen B T,Lin T K.Robust spiral tool-path generation for arbitrary pockets[J].Internal Journal of Advanced Manufacturing Technology,2001,17:181-188
[9]
伊宗М X.燃气涡轮发动机叶片的机械加工[M].北京:国防工业出版社,1965 Yi Zong M X.Machining of gas twrbine engine blades[M].Beijing:Natinal Defence of Industry Press,1965(in Chinese)
[10]
Chiou C J,Lee Y S.A shape-generating approach for multi-axis machining G-buffer models[J].Computer-Aided Design,1999(31):761-776
张洪.从增大行距宽度减小波纹度的角度看型面加工发展的方向 .北京:北京航空学院制造工程系,1982 Zhang Hong.Observing the development of machining sculptured surfaces from the perspective of increasing strip width and decreasing waviness .Beijing:Manufacturing Engineering Department,Beijing Institute of Aeronautics,1982(in Chinese)
[13]
吕雪丽,张洪.广域曲率吻合原则与复杂曲面数控加工的全面优化[J].机械设计与制造,2003,10(5):94-96 Lü Xueli,Zhang Hong.Principle of global curvature fitting and global optimization of sculptured surface NC machining[J].Machinery Design and Machining,2003,10(5):94-96(in Chinese)
[14]
Yu Guang.General tool correction for five-axis milling[J].International Journal of Advanced Manufacturing Technology,1995,10(5):374-378
