Kolondzovski Z,Belahcen A,Arkkio A.Comparative thermal analysis of different rotor types for a high-speed permanent-magnet electrical machine[J].IET Electric Power Applications,2009,3(4):279-288
[2]
余莉.高速永磁无刷直流电机性能分析与设计的研究[D].南京:东南大学电气工程学院,2007Yu Li.Study on performance analysis and design of high speed permanent magnet brushless DC motor [D].Nanjing:School of Electrical Engineering,Southeast University,2007(in Chinese)
[3]
李鲲鹏.高速电机电路模型和铁耗的分析与计算[D].南京:东南大学电气工程学院,2003Li Kunpeng.High-speed motor circuit model and analysis and calculation of iron losses [D].Nanjing:School of Electrical Engineering,Southeast University,2003(in Chinese)
[4]
陈世坤.电机设计[M].2版.北京:机械工业出版社,2000:118-134Chen Shikun.Motor design [M].2nd ed.Beijing:China Machine Press,2000:118-134 (in Chinese)
[5]
黄国治,傅丰礼.中小旋转电机设计手册[M].北京:中国电力出版社,2007:374-390Huang Guozhi,Fu Fengli.Design manual of middle and small rotary motor[M].Beijing:China Electric Power Press,2007:374-390 (in Chinese)
[6]
魏永田,孟大伟,温嘉斌.电机内热交换[M].北京:机械工业出版社,1998:24-33Wei Yongtian,Meng Dawei,Wen Jiabin.Heat exchange in motor[M].Beijing:China Machine Press,1998:24-33 (in Chinese)
[7]
Atallah K,Zhu Z Q,Howe D.An improved method for predicting iron losses in brushless permanent magnet DC drives[J].IEEE Transactions on Magnetics,1992,28(5):2997-2999
[8]
张颖博,王凤翔,邢军强,等.高速永磁电机铁耗计算方法研究[J].大电机技术,2009,8:39-43Zhang Yingbo,Wang Fengxiang,Xing Junqiang,et al.Research on calculation method of core loss for high speed PM machine[J].Large Motor Techniques,2009,8:39-43(in Chinese)
[9]
Shigematsu K,Oyama J,Higuchi T,et al.The study of eddy current inrotor and circuit coupling analysis for smallsize and ultra-high speed motor[C] //Wang Zhaoan.Proceedings of 4th International Power Electronics and Motion Control Conference.Xi-an:Xi-an Jiaotong University Press,2004,1:275-279
[10]
AglenO.Loss calculation and thermal analysisof a high-speedgenerator[C]//2003 IEEE International Electric Machines and Drives Conference.Madison:IEEE,2003,2:1117-1123
[11]
Zhang Dianhai,Wang Fengxiang,Kong Xiaoguang.Air friction loss calculation of high speedpermanent magnet machines[C] //Yang K,Wang J.Proceedings of the 11th International Conference on Electrical Machines and Systems.Piscataway,NJ:Institute of Electrical and Electronics Engineers,2008:320-323
[12]
Huang Yunkai,Zhu Jianguo,Guo Youguang.Thermal analysis of high-speed SMC motor based on thermal network and 3-D FEA with rotational core loss included[J].IEEE Transactions on Magnetics,2009,45(10):4680-4683
[13]
Nerg J,Rilla M,Pyrhonen J.Thermal analysis of radial-flux electrical machines with a high power density[J].IEEE Transactions on Industrial Electronics,2008,55(10):3543-3554
[14]
Aglen O,Andersson A.Thermal analysis of a high-speed generator[C] // IEEE Industry Applications Society.Salt Lake:Institute of Electrical and Electronics Engineers,2003,1:547-554
[15]
Zhou Fengzheng,Shen Jianxin,Fei Weizhong,et al.Study of retaining sleeve and conductive shield and their influence on rotor loss in high-speed PM BLDC motors[J].IEEE Transactions on Magnetics,2006,42(10):3398-3400
