芮剑锋,杨建军,石艳.基于TOC及启发式规则的生产计划与控制方法[J].航空制造技术,2012(7):76-80 Rui Jianfeng,Yang Jianjun,Shi Yan.Production planning and control method based on TOC and heuristic rules[J].Aeronautical Manufacturing Technology,2012(7):76-80(in Chinese)
[2]
丁胡送,何平,徐晓燕.柔性对分布式制造系统绩效的影响[J].系统工程理论与实践,2011,31(9):1776-1783 Ding Husong,He Ping,Xu Xiaoyan.Impact of flexibility on performance of decentralized manufacturing system[J].Systems Engineering-Theory & Practice,2011,31(9):1776-1783(in Chinese)
[3]
段建国,李爱平,谢楠,等.基于状态熵的制造系统结构复杂性建模与评价[J].机械工程学报,2012,48(5):92-100 Duan Jianguo,Li Aiping,Xie Nan,et al.Structural complexity modeling and evaluation of manufacturing systems based on state entropy[J].Journal of Mechanical Engineering,2012,48(5):92-100(in Chinese)
[4]
Kuzgunkaya O,Eimaraghy H A．Assessing the structural complexity of manufacturing systems configurations[J].International Journal of Flexible Manufacturing Systems,2006,18(2):145-171
[5]
杨建军,寇益.在线仿真系统在生产计划与调度中的应用[J].北京航空航天大学学报,2009,35(2):215-218 Yang Jianjun,Kou Yi.Application of online simulation in production planning and scheduling[J].Journal of Beijing University of Aeronautics and Astronautics,2009,35(2):215-218(in Chinese)
[6]
Zhang Zhifeng.Complexity of cellular manufacturing systems based on entropy models[J]．Journal of Mechanical Science and Technology,2010,24(11):2275-2280
[7]
郑力,江平宇,乔立红,等. 制造系统研究的挑战和前沿[J].机械工程学报,2010,46(21):124-136 Zheng Li,Jiang Pingyu,Qiao Lihong,et al.Challenges and frontiers of manufacturing systems[J].Journal of Mechanical Engineering,2010,46(21):124-136 (in Chinese)
[8]
Aleisa E E,Lin L.For effective facilities planning:layout optimisation then simulation, or vice versa//Kuhl M E,Steiger N M,Armstrong F B,et al.Proceedings of the 2005 Winter Simulation Conference.Florida:Society for Computer Simulation International,2005:1381-1385
[9]
刘飞．先进制造系统[M]．北京:中国科学技术出版社,2006:10-30 Liu Fei.Modern manufacturing system[M].Bejing:China Science & Technology Press,2006:10-30(in Chinese)
[10]
Chandra C,Grabis J.Role of flexibility in supply chain design and modeling:introduction to the special issue[J].Omega,2009(37): 743-745
