Bakuckas J G,Bigelow C A,Tan P W.Characterization of fatigue behaviour of aircraft fuselage structure //Proceedings of the 22nd Symposium of the International Committee on Aeronautical Fatigue.Lucern,Switzerland:EMAS,2003:5-9
[2]
Bakuckas J G,Bigelow C A,Tan P W.Characterization of fatigue behaviour of aircraft fuselage structure //Proceedings of the 22nd Symposium of the International Committee on Aeronautical Fatigue.Lucern,Switzerland:EMAS,2003:5-9
[3]
Wang Min,Xue Shaoding,Jiang Hongyu,et al.Development of knowledge-based system on aircraft assembly drilling process //IEEE International Conference on Information Science and Engineering(ICISE).Hangzhou:IEEE,2010:1-4
[4]
Wang Min,Xue Shaoding,Jiang Hongyu,et al.Development of knowledge-based system on aircraft assembly drilling process //IEEE International Conference on Information Science and Engineering(ICISE).Hangzhou:IEEE,2010:1-4
[5]
Proppe C.Probabilistic analysis of multi-site damage in aircraft fuselages[J].Computational Mechanics,2003,30(4):323-329
[6]
Proppe C.Probabilistic analysis of multi-site damage in aircraft fuselages[J].Computational Mechanics,2003,30(4):323-329
[7]
Lutters W G,Ackerman M S.Achieving safety:a field study of boundary objects in aircraft technical support //Proceedings of ACM conference on Computer Supported Cooperative Work.New York:ACM,2002:266-275
[8]
Devlieg R,Szallay T.Applied accurate robotic drilling for aircraft fuselage[J].SAE International Journal of Aerospace,2010,3(1):180-186
[9]
Hasegawa N,Okada T,Shimizu T.Measurement of surface-normal using a range sensor with a pair of wedge-prisms //IEEE International Conference on Instrumentation and Measurement Technology (IMTC).Ottawa,Canada:IEEE,2005,1744-1749
[10]
应高明,王仲奇,康永刚,等.飞机壁板自动钻铆法向量测量方法研究[J].机床与液压,2010,38(20):1-4 Ying Gaoming,Wang Zhongqi,Kang Yonggang,et al.Study on normal vector measurement method in auto-drilling and riveting of aircraft panel[J].Machine Tool & Hydraulics,2010,38(20):1-4(in Chinese)
[11]
应高明,王仲奇,康永刚,等.飞机壁板自动钻铆法向量测量方法研究[J].机床与液压,2010,38(20):1-4 Ying Gaoming,Wang Zhongqi,Kang Yonggang,et al.Study on normal vector measurement method in auto-drilling and riveting of aircraft panel[J].Machine Tool & Hydraulics,2010,38(20):1-4(in Chinese)
[12]
Lutters W G,Ackerman M S.Achieving safety:a field study of boundary objects in aircraft technical support //Proceedings of ACM conference on Computer Supported Cooperative Work.New York:ACM,2002:266-275
[13]
Hasegawa N,Okada T,Shimizu T.Measurement of surface-normal using a range sensor with a pair of wedge-prisms //IEEE International Conference on Instrumentation and Measurement Technology (IMTC).Ottawa,Canada:IEEE,2005,1744-1749
[14]
Devlieg R,Szallay T.Applied accurate robotic drilling for aircraft fuselage[J].SAE International Journal of Aerospace,2010,3(1):180-186
[15]
蔺小军,王增强,单晨伟.自由曲面CMM测量测头半径补偿方法[J].航空制造技术,2011(10):75-77,85 Lin Xiaojun,Wang Zengqiang,Shan Chenwei.Method of probe radius compensation for free surface measurement[J].Aeronautical Manufacturing Technology,2011(10):75-77,85(in Chinese)
[16]
蔺小军,王增强,单晨伟.自由曲面CMM测量测头半径补偿方法[J].航空制造技术,2011(10):75-77,85 Lin Xiaojun,Wang Zengqiang,Shan Chenwei.Method of probe radius compensation for free surface measurement[J].Aeronautical Manufacturing Technology,2011(10):75-77,85(in Chinese)
[17]
Page D L,Sun Y,Koschan A F,et al..Normal vector voting:crease detection and curvature estimation on large,noisy meshes[J].Graphical Models,2002,64:199-229
[18]
Page D L,Sun Y,Koschan A F,et al..Normal vector voting:crease detection and curvature estimation on large,noisy meshes[J].Graphical Models,2002,64:199-229
[19]
秦现生,汪文旦,楼阿莉,等.大型壁板数控钻铆的三点快速调平算法[J].航空学报,2007,28(6):1455-1460 Qin Xiansheng,Wang Wendan,Lou Ali,et al.Three-point bracket regulation algorithm for drilling and riveting of aerofoil[J].Acta Aeronautica et Astronautica Sinica,2007,28(6):1455-1460(in Chinese)
秦现生,汪文旦,楼阿莉,等.大型壁板数控钻铆的三点快速调平算法[J].航空学报,2007,28(6):1455-1460 Qin Xiansheng,Wang Wendan,Lou Ali,et al.Three-point bracket regulation algorithm for drilling and riveting of aerofoil[J].Acta Aeronautica et Astronautica Sinica,2007,28(6):1455-1460(in Chinese)
[22]
Gerald F.Curves and surface for CAGD:a practical guide[M].San Francisco:Morgan Kaufmann,2002:261-263
Jin Shuangshuang,Lewis R,West D.A comparison of algorithms for vertex normal computation[J].The Visual Computer,2005,21(1/2):71-82
[25]
Gerald F.Curves and surface for CAGD:a practical guide[M].San Francisco:Morgan Kaufmann,2002:261-263
[26]
Klasing K,Althoff D,Wollherr D,et al.Comparison of surface normal estimation methods for range sensing applications //IEEE International Conference on Robotics and Automation (ICRA).Kobe:IEEE,2009:3206-3211
[27]
Jin Shuangshuang,Lewis R,West D.A comparison of algorithms for vertex normal computation[J].The Visual Computer,2005,21(1/2):71-82
[28]
Klasing K,Althoff D,Wollherr D,et al.Comparison of surface normal estimation methods for range sensing applications //IEEE International Conference on Robotics and Automation (ICRA).Kobe:IEEE,2009:3206-3211
