李重河,朱明,王宁,等.钛合金在飞机上的应用[J].稀有金属,2009,33(1):84-91 Li Chonghe,Zhu Ming,Wang Ning,et al.Application of titanium alloy in airplane[J].Chinese Journal of Rare Metals,2009,33(1):84-91(in Chinese)
[2]
Shan Debin,Lu Yan,Li Ping,et al.Experimental study on process of cold-power spinning of Ti-15-3 alloy[J].Journal of Materials Processing Technology,2001,115(3):380-383
[3]
Asnafi N.On stretch and shrink flanging of sheet aluminium by fluid forming[J].Journal of Materials Processing Technology,1999,96(1/2/3):198-214
[4]
Ramezani M,Ripin Z M,Ahmad R.Computer aided modelling of friction in rubber-pad forming process[J].Journal of Materials Processing Technology,2009,10(209):4925-4934
[5]
王福东.大曲率凸弯边零件橡皮囊液压成形工艺研究[D].南京:南京航空航天大学,2011 Wang Fudong.Study on rubber blander hydraulic forming process for shrink flanging part with large curvature[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2011(in Chinese)
[6]
Kim J B,Yoon J W,Yang D Y,et al.Investigation into wrinkling behavior in the elliptical cup deep drawing process by finite element analysis using bifurcation theory[J].Journal of Materials Processing Technology,2001,111(1/2/3):170-174
[7]
韩金全,万敏,袁胜,等.飞机复杂蒙皮拉形模具型面设计方法[J].北京航空航天大学学报,2008,34(11):1360-1363 Han Jinquan,Wan Min,Yuan Sheng,et al.Design method for surface of stretching tool for complex aircraft skin[J].Journal of Beijing University of Aeronautics and Astronautics,2008,34(11):1360-1363(in Chinese)
[8]
航空制造工程手册总编委员会.飞机钣金成形工艺[M].北京:航空工业出版社,1992 Aviation Editor of Manufacturing Engineering Handbook Committee.Aircraft sheet metal process[M].Beijing:Aviation Industry Press,1992(in Chinese)
[9]
Sun Yongna,Wan Min,Wu Xiangdong.Inverse identification of titanium alloy TB5's material parameters based on response surface methodology and quasi-Newton method[J].Advanced Composite Materials,2012,482/483/484:2012-2016
[10]
Sun Yongna,Wan Min,Wu Xiangdong.Study on friction coefficient in rubber forming process of Ti-15-3 alloy[J].Transactions of Nonferrous Metals Society of China,2012,22(12):3012-3018
