|
OALib Journal期刊
ISSN: 2333-9721
费用：99美元
|
|
|
|
环氧涂层填充型钢绞线锚具的有限元建模与锚固性能分析
, PP. 75-80
Keywords: 桥梁工程,环氧涂层填充型钢绞线,有限元分析,锚具,锥角匹配
Abstract:
为解决环氧涂层填充型钢绞线锚具设计中锚板与夹片锥角相匹配的问题,利用ANSYS软件对其锚具进行了有限元建模和分析,计算了在锚板与夹片锥角相同以及锚板锥角小于夹片锥角10′情形下锚具的应力、变形及压力,分析了对锚固性能的影响。结果显示,锚板与夹片锥角相同时,夹片根部的Mises应力、径向应力及锚板与夹片之间的压力值都很高,产生切口效应,锚固效率小于95%,达不到锚固性能要求;当锚板锥角比夹片锥角小10′时,锚具应力、变形及压力减小了很多,未出现切口效应,锚固效率大大超过95%,完全符合锚固性能要求。此外,分析了夹片与锚板间摩擦系数对锚板受力及锚固性能的影响,可为锚具的设计和制造提供参考。
| [1] | 张玉中,李瑞林,杜冬峡.QM-7型锚板应力分析
|
| [2] | [J].中南公路,1996,21(4):44-46.ZHANG Yu-zhong,LI Rui-lin,DU Dong-xia.Stress of An-chor Head with Type QM-7
|
| [3] | [J].Henan Science,1998,16 (3):314-317.
|
| [4] | 陶浩,段红杰,刘建秀.预应力锚具的强度性能和破坏研究
|
| [5] | [J].机械设计,2003,20(8):13-15.TAO Hao,DUAN Hong-Jie,LIU Jian-xiu.Study on Strength Performance and Destruction of Prestressed Anchor
|
| [6] | 李晨光,李晓光,卞延彬.多根钢绞线夹片式锚具的试验与数值研究
|
| [7] | [J].建筑技术开发,2002,29(11):22-25.LI Chen-guang,LI Xiao-guang,BIAN Yan-bin.Tho Test ＆ Numerical Study on Wedge Anchorage of Multi-Strand
|
| [8] | [J].Building Technique Development,2002,29 (11):22-25.
|
| [9] | [J].西南交通大学学报,2004,39(5):614-617.ZHAO Tong,ZUO De-yuan,TONG Jian-gang.FEM-Based Parametrization Design of Cone Angle of Anchors
|
| [10] | 李晨光,刘航.高效体外预应力结构锚固体系研究与应用
|
| [11] | [J].建筑技术开发,2001,28(5):11-17.LI Chen-guang,LIU Hang.The Research and Application of Anchorage System for High-efficient External Prestressed Structures
|
| [12] | [J].Building Technique Development,2001,28(5):11-17.
|
| [13] | 丁皓江,何富保,谢贻权.弹性和塑性力学中的有限单元法
|
| [14] | [M].北京:高等教育出版社,2000.DING Hao-jiang,HE Fu-bao,XIE Yi-quan.Finite Element Method in Elastic and Plastic Mechanics
|
| [15] | [M].Beijing:Higher Education Press,2000.
|
| [16] | 赵有梁,袁华,袁关生.对钢绞线"切口效应"改善的探讨
|
| [17] | [J].公路,1997(1):29-31.ZHAO Yon-liang,YUAN Hua,YUAN Guan-sheng.Discuss on Improvement of "Cut Effect" of Strand
|
| [18] | [J].Highway,1997 (1):29-31.
|
| [19] | 饶德军,唐小萍,黎海宁,等.横索向无转动约束的拉索锚具设计
|
| [20] | [J].公路交通科技,2004,21(8):53-55,63.RAO De-jun,TANG Xiao-ping,LI Hai-ning,et al.Designs of Swing Anchor
|
| [21] | [J].Journal of Highway and Transportation Research and Development,2004,21 (8):53-55,63.
|
| [22] | [J].Central South Highway Engi-neering,1996,21 (4):44-46.
|
| [23] | LIU Jian-xiu,SONG Xue-qian,LI Chun-yan.The Finite Ele-ment Method Analysis the Strength and the Deformation of Pres-tress Concrete Anchors
|
| [24] | [J].Jou-rnal of Machine Design,2003,20 (8):13-15.
|
| [25] | GALVEZ J C,ELICES M,OLIVARES M A.Damage Toler-ance of an Anchor Head in a Post-tensioning Anchorage System
|
| [26] | 曹玉忠,卢泽生,李晨光.体外预应力锚具弹塑性有限元分析
|
| [27] | [J].特种结构,2000,17(4):49-50,66.CAO Yu-Zhong,LU Ze-sheng,LI Chen-guang.Elastic-Plastic Analysis of External Anchor Heads
|
| [28] | [J].Special Structures,2000,17 (4):49-50,66.
|
| [29] | MARCEAU D,FAFARD M,BASTIEN J.Numerical Study of Mono-strand Anchorage Mechanism under Service Load
|
| [30] | [J].Structural Engineering and Mechanics,2004,18 (4):475-491.
|
| [31] | 赵通,左德元,童建刚.夹片式锚固体系锥角的有限元参数化设计
|
| [32] | [J].Journal of Southwest Jiaotong University,2004,39 (5):614-617.
|
| [33] | ANSYS INC.ANSYS 7.0 Online Manuals
|
| [34] | [CP/CD].ANSYS Inc.,2003.
|
Full-Text
|
|
Contact Us
service@oalib.com QQ:3279437679 
WhatsApp +8615387084133
|
|
