陈骁,朱春阳.不同沥青混合料设计方法对比评价分析［J］.中外公路,2007,27(4):267-271. CHEN Xiao, ZHU Chun-yang. Contrast Analysis of Different Asphalt Mixture Design Methods［J］. Journal of China & Foreign Highway,2007,27(4):267-271.
[2]
周杰,王曦林,郑存艳,等.沥青混合料Superpave与马歇尔设计方法的比较［J］.武汉理工大学学报,2007,29(9):68-70. ZHOU Jie, WANG Xi-lin, ZHENG Cun-yan, et al. Comparison of Superpave and Marshall Methodology on Asphalt Mixture Design［J］.Journal of Wuhan University of Technology,2007,29(9):68-70.
[3]
唐秀明.沥青混合料马歇尔设计方法与GTM设计方法的对比研究［J］.公路,2009(3):66-69. TANG Xiu-ming. Comparison of Marshall and GTM Method on Asphalt Mixture Design［J］.Highway,2009(3):66-69.
[4]
GOETZ W H. The Evaluation of Asphalt Concrete Mix Design［M］. West Conshohocken, PA: American Society for Testing and Materials, 1989:5-14.
[5]
JTG F40—2004,公路沥青路面施工技术规范［S］. JTG F40—2004,Technical Specifications for Construction of Highway Asphalt Pavement ［S］.
[6]
杜群乐. 沥青路面损坏分析与GTM混合料设计方法的研究［D］.上海:同济大学,2006. DU Qun-le. Distress Analysis of Asphalt Pavement and Research on GTM Design Method of Asphalt Mixture［D］. Shanghai:TongJi University,2006.
[7]
易富,金艳,苏剑.两种压实方法下沥青混合料空隙分布特性细观分析［J］.公路交通科技,2014,31(3):26-31. YI Fu, JIN Yan, SU Jian. Mesoscopic Analysis of Air Void Distribution of Asphalt Mixture in Two Compaction Methods［J］. Journal of Highway and Transportation Research and Development,2014,31(3):26-31.
[8]
于洪兴,魏连雨,赵可,等.采用GTM方法设计的沥青混合料高温稳定性研究［J］.公路交通科技,2005,25(9):23-26. YU Hong-xing, WEI Lian-yu, ZHAO Ke, et al. Research on Asphalt Mixture Dynamic Stability Design with GTM［J］. Journal of Highway and Transportation Research and Development,2005,25(9):23-26.
[9]
李闯民. 沥青混合料体积参数研究［D］.南京:东南大学,2005. LI Chuang-min. Research on Volumetric Parameter of Asphalt Mixture［D］. Nanjing:Southeast University,2005.
[10]
解晓光,马松林,王哲人.沥青混合料马歇尔击实法与振动压实法成型工艺的比较研究［J］.中国公路学报, 2001,14(1):11-14. XIE Xiao-guang, MA Song-lin, WANG Zhe-ren. Study of Compacting Properties of Asphalt Mixture with MARSHALL and Vibratory Compaction Method［J］.China Journal of Highway and Transport,2001,14(1):11-14.
[11]
华南理工大学道路工程研究所. 沥青混合料矿料级配及配合比设计方法的修订［R］.广州:华南理工大学,2002. Institute of Road Engineering of South China University of Technology. Revision on Ore Material Gradation of Bitumen Mixture and Mix Proportion Design ［R］. Guangzhou:South China University of Technology,2002.
[12]
沙爱民,王玲娟,耿超. 大粒径碎石沥青混合料振动压实方法［J］. 长安大学学报:自然科学版,2008, 28(2):1-4. SHA Ai-min, WANG Ling-juan, GENG Chao. Vibrating Compaction Method of Large Stone Asphalt Mixture ［J］. Journal of Chang'an University: Natural Science Edition, 2008, 28(2):1-4.
[13]
梁慧.ATB-30沥青混合料VVCM方法及设计方法研究［D］.西安:长安大学,2013. LIANG Hui. Study on VVCM Method and Designing Method of ATB-30 Asphalt Mixture［D］. Xi'an: Chang'an University,2013.
[14]
JTG E20—2011,公路工程沥青及沥青混合料试验规程［S］. JTG E20—2011,Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering［S］.
[15]
毕玉峰,孙立军.沥青混合料抗剪试验方法研究［J］.同济大学学报:自然科学版,2005,33(8):1036-1040. BI Yu-feng, SUN Li-jun. Research on Test Method of Asphalt Mixture's Shearing Properties ［J］. Journal of Tongji University: Natural Science Edition,2005,33(8):1036-1040.
[16]
吕光印,郝培文,庞立果,等.沥青混合料半圆弯曲试验力学特性数值分析［J］.武汉理工大学学报,2008,30(3):50-52. Lü Guang-yin, HAO Pei-wen, PANG Li-guo, et al. Mechanical Simulation of Semi-circular Bending Test in Asphalt Mixtures［J］.Journal of Wuhan University of Technology,2008,30(3):50-52.
