全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

配置HRB500级非预应力筋的无粘结部分预应力梁应力增量试验

Keywords: 桥梁工程,无粘结部分预应力混凝土梁,应力增量,荷载试验,HRB500级钢筋

Full-Text   Cite this paper   Add to My Lib

Abstract:

对5片配置不同强度等级非预应力筋的无粘结部分预应力混凝土试验梁进行了加载试验,研究了该结构正常使用阶段和承载能力极限状态下,非预应力筋的强度等级以及高强非预应力筋配筋率对预应力筋应力增量的影响,并根据各国规范对试验梁极限应力增量的计算值与实测值进行了对比分析。研究结果表明非预应力筋的强度等级差别及配筋率在弹性工作阶段对预应力筋的应力增量影响很小,但在混凝土开裂后至破坏阶段影响显著。各国规范极限应力增量计算值和实测值相比,我国现行规范计算结果更为安全合理。

References

[1]  方德平.部分预应力混凝土梁中无粘结筋应力增量的弯矩一曲率分析法[J].华侨大学学报: 自然科学 版,1997,18(1): 52-57.FANG De-ping.Bending Moment-curvature Method for Analyzing Stress Increment of Un-bonded Tendon in Partially Pre-stressed Concrete Beam[J].Journal of Huaqiao University: Natural Science Edition,1997,18 (1): 52-57.
[2]  于秋波.HRB500 钢筋混凝土受弯构件最小配筋率的 探讨[J].工业建筑,2009,39(1): 90-92.YU Qiu-bo.Discussion on the Minimum Ratio of the Reinforcement in Reinforced Concrete Flexural Members with HRB500 Bar Steel[J].Industrial Construction, 2009,39(1): 90-92.
[3]  裴智,王友权,王学忠,等.HRB500 钢筋的研究开 发与应用[J].建筑结构,2003,33(8): 28-29.PEI Zhi,WANG You-quan,WANG Xue-zhong,et al.Research Development and Application of HRB500 Reinforcement[J].Building Structure,2003,33(8): 28-29.
[4]  毛达岭.500MPa级钢筋混凝土受压构件受力性能研究[D].郑州: 郑州大学,2008.MAO Da-ling.Performance Study of Concrete Compressive Member Reinforced with Grade 500 MPa Steel Bars[D].Zhengzhou: Zhengzhou University,2008.
[5]  王春生,徐岳,陈艾荣.UPPC 梁桥无粘结预应力筋极限应力分析[J].中国公路学报,2001,14(4),70-74.WANG Chun-sheng,XU Yue,CHEN Ai-rong.Ultimate Stress Analysis of Unbonded Tendons in Unbonded Partially Prestressed Concrete(UPPC)Beam Bridges [J].China Journal of Highway and Transport,2001,14 (4): 70-74.
[6]  郑文忠,王晓东,王英.无粘结筋极限应力增量计算公式对比分析[J].哈尔滨工业大学学报,2009,41 (10): 7-13.ZHENG Wen-zhong,WANG Xiao-dong,WANG Ying.Comparison of Formulas for Calculating the Ultimate Stress Increment in Unbonded Tendons[J].Journal of Harbin Institute of Technology,2009,41(10): 7-13
[7]  ACI 318-02 /318R-02,Building Code Requirements for Structural Concrete and Commentary[S].
[8]  BS8110-1—1997,Structural Use of Concrete,Part 1- Code of Practice for Design and Construction[S].
[9]  CSA A23.3—04.Design of Concrete Structures[S].
[10]  JGJ92—2004,无粘结预应力混凝土结构技术规程[S].JGJ92—2004, Technical Specification for Concrete Structures Prestressed with Unbonded Tendons[S].
[11]  NAAMAN A E,ALKHAIRI F M.Stress at Ultimate in Unbonded Prestressing Tendons: Part 1-Evaluation of the State-of-art[J].Structural Journal,1991,88(5): 641-651.
[12]  杜拱辰,陶学康.部分预应力混凝土梁无粘结筋极限应力的研究[J].建筑结构学报,1985(6): 2-13.DU Gong-chen,TAO Xue-kang.A Study of the Ultimate Stress of Unbonded Tendons in Partially Prestressed Concrete Beams[J].Journal of Building Structures, 1985(6): 2-13.
[13]  贺志启,刘钊,王景全.基于挠度的体外预应力梁应力增量统一算法[J].土木工程学报,2008,41(9): 90-96.HE Zhi-qi, LIU Zhao,WANG Jing-quan.A Unified Algorithm for Calculating Stress Increment of External Tendons Based on Deflection[J].China Civil Engineering Journal,2008,41(9): 90-96.
[14]  于秋波.HRB500 级钢筋部分预应力混凝土梁受力性能研究[D].郑州: 郑州大学,2008.YU Qiu-bo.Study on Stress Behavior of Partially Prestressed Concrete Beams with HRB500 Steel Bars[D].Zhengzhou: Zhengzhou University,2008.
[15]  EL-ARISS B.Stiffness of Reinforced Concrete Beams with External Tendons[J].Engineering Structure,2004,26 (14): 2047-2051.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133