[S].JTG D20-2006,Design Specification for Highway Alignment
[3]
[S].
[4]
JTJ001-2003,公路工程技术标准
[5]
AASHTO.A Policy on Geometric Design of Highways and Streets
[6]
[M].Washington D C U.S.:American Association of State Highway and Transportation Officials,2004.
[7]
交通部公路科学研究院.山区双车道公路路线设计参数的研究
[8]
[R].北京:交通部公路科学研究院,2006.Research Institute of Highway,Ministry of Communications.Study on Elemeras of Geometry Design for Two-lane Mountain Terrain Highways
[9]
[R].Beijing:Research Institute of Highway,Ministry of communications,2006.
[10]
GB 1589-2004,道路车辆外廓尺寸、轴载及质量限值
[11]
[S].
[12]
GB/T3730.1-2001,汽车和挂车类型的术语和定义
[13]
[S].GB/T 3730.1-2001,Motor Vehicles and Trailers-Types:Termsand Definitions
[14]
[S].
[15]
余志生.汽车理论
[16]
[M].北京:机械工业出版社,1990.YU Zhi-sheng.Vehicle Theory
[17]
熊烈强,李杰.车辆折算系数的分类及算法
[18]
[J].公路交通科技,2005,22(7):128-130.XIONG Lie-qiang,LI Jie.Classification and Calculation Method of Passenger Car Equivalent
[19]
[J].Journal of Highuay and Transportation Reasearch and Depelopment,2005,22(7):128-130.
[20]
HARDWOOD D w,J M MASON,GLAUS W D,et al.Truck Characteristics for Use in Highway Design and Operation
[21]
[M].Mclean Virginia U.S:Department of Transporlation,Federal Highway Administration,1990.
[22]
周荣贵,江立生,孙家风.公路纵坡坡度和坡长限制指标的确定
[23]
[S].JTJ001-2003,Techieal Standar of HighWay Engineering
[24]
[S].
[25]
[S].GB 1589-2004,Limits of Dimensions,Axle Load and Masses for Road Vehicles
[26]
[M].Beijing:China Machine Press,1990.
[27]
[J].公路交通科技,2004,21(7):1-4.ZHOU Rong-gui,JIANG Li-sheng,SUN Jia-feng.The Study of Highway Gradient and Grade Length Limit
[28]
[J].Journal of Highway and Transportation Research and Development,2004,21(7):1-4.
[29]
AUSTROADS.A Guide to the Geometric Design of Rural Roads
[30]
[M].Sydney:AUSTROADS,2003.
[31]
FHWA-IP-88-105.Crade Severity Rating System(GSRS)
[32]
[M].McLean Virginia U.S:Department of Transportation Federal Highway Administration,1989.
