[J].桥梁建设,2004(1):66-69.WEI Xing,QIANG Shi-zhong.Analysis of Cracks in Top Slab of Railway Skew Frame Bridge
[3]
[J].中国铁道科学,2006,27(1):8-13.LIU Xiao-yan,YAN Dong-huang,ZHANG Feng,et al.The Ultimate Bearing Capacity and Parameter Analysis of High-strength Concrete TO Beam
[4]
欧阳祥森.装配式斜交空心板桥受力特性分析与设计方法研究
[5]
[D].长沙:长沙理工大学,2006.OUYANG Xiang-sen.Mechanical Properties and Design Method of Assembly Skew Hollow Slab Bridge
[6]
[D].Changsha:Changsha University of Science & Technology,2006.
[7]
狄谨,周绪红,刘永健.矩形钢管混凝土桁架节点极限承载力研究
[8]
[J].中国公路学报,2004,17(3):6-67.DI Jin,ZHOU Xu-hong,LIU Yong-jian.Research on the Ultimate Bearing Capacity of Joint in Concrete Filled Rectangular Steel Tube Truss
[9]
[J].China Journal of Highway and Transport,2004,17(3):62-67.
[10]
JTG D62O2004,公路钢筋混凝土及预应力混凝土桥涵设计规范
[11]
[S].JTG D62O2004,Code for Design on Reinforced and Prestressed Concrete Structures of Highway Bridges and Culverts
[M].Beijing:Architecture Industry Press of China,1998.
[16]
过镇海.混凝土的强度和变形
[17]
[M].北京:清华大学出版社,1997.GUO Zhen-hai.Strength and Deformation of Concrete
[18]
[M].Beijing:Tsinghua University Press,1997.
[19]
冯鹏,叶列平,庄崖屏.高强混凝土圆形截面偏心受压构件正截面承载力计算
[20]
[J].建筑结构,2000,30(10):14-16.FENG Peng,YE Lie-ping,ZHUANG Ya-ping.Normal Section Strength Calculation of Eccentrically Compressed Ring-section Members of High-strength Concrete
[21]
[J].Building Structure,2000,30(10):14-16.
[22]
王树森,刘寒兵,李春良,等.碳纤维加固混凝土梁抗弯性能的非线性有限元分析
[23]
[J].Bridge Construction,2004(1):66-69.
[24]
沈聚敏,王传志,江见鲸.钢筋混凝土有限元与板壳极限分析
[25]
[M].北京:清华大学出版社,1991.SHENG Ju-min,WANG Chuan-zhi,JIANG Jian-qiong.Finite Element of Reinforced Concrete and Limit Analysis of Plates and Shells
[26]
[M].Beijing:Tsinghua University Press,1991.
[27]
刘小燕,颜东煌,张峰,等.高强混凝土T梁极限承载力计算与参数分析
[28]
[J].China Railway Science,2006,27(1):8-13.
[29]
[J].公路交通科技,2005,22(4):61-64.WANG Shu-sen,LIU Han-bing,LI Chun-liang,et al.Finite Element Nonlinear Analysis for the Flexural Strengthening of Carbon Fiber Reinforced Concrete Beams
[30]
[J].Journal of Highway and Transportation Research and Development,2005,22(4):61-64.
