全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

PC箱梁墩顶块数值模型分析方法

, PP. 81-86

Keywords: 桥梁工程,墩顶块,数值模型,预应力孔道,模型范围

Full-Text   Cite this paper   Add to My Lib

Abstract:

针对目前大跨径桥梁墩项块数值模型建立及分析方法上的不足,研究了大跨径桥梁墩顶块数值分析的单元选择、网格划分、网格密度、模型简化、预应力孔道影响及子模型选取范围等关键问题。通过与实测数据对比分析得出,在分析墩顶块这种复杂结构时,高阶四面体单元及自由网格划分模拟精度较高;将预应力孔道简化为方形孔道时,距离2倍孔道半径范围以外,正应力和主压应力基本相同,距离3倍孔道半径范围以外,主拉应力也基本趋于一致;空间模型选取长度在2倍0号块梁高以上时,各关键点的应力基本趋于一致等结论。本文分析方法为目前墩顶块空间应力分布特点的研究提供了一种重要的分析手段。

References

[1]  [J].中外公路,2005,25(12):67-70.WANG Wei-feng,XU Yu-feng,Zhaoqing Xijiang Bridge 0#Block Spatial Simulative Analysis
[2]  [J].Journal of China & Foreign Highway,2005,25(12):67-70.
[3]  喻珍福.后溪坂1号大桥0#块使用阶段应力分析
[4]  [J].公路交通技术,2007(4):75-77.YU Zhen-fu.Stress Analysis of 0# Segment of Houxiban No.1 Bridge in Using Stage
[5]  [J].Technology of Highway and Transport,2007(4):75-77.
[6]  白金泽,孙秦,郭英男.应用ANSYS进行复杂结构应力分析
[7]  [J].机械科学与技术,2003,22(3):441-446.BAI Jin-ze,SUN Qin,GUO Ying-nan.Stress-analysis of a Complex Structure with the ANSYS System
[8]  [J].Mechanical Science and Technology,2003,22(3):441-446.
[9]  葛素娟,李静斌.预应力混凝土连续刚构桥0号块空间分析
[10]  [J].郑州大学学报(工学版),2006,27(9):1-5.GE Su-juan,LI Jing-bin.Spatial Analysis of Segment No.0 of Prestressed Concrete Continued Rigid Frame Bridge
[11]  [J].Journal of of Zhengzhou University (Engineering Science),2006,27(9):1-5.
[12]  金晶,吴新跃.有限元网格划分相关问题分析研究
[13]  [J].计算机辅助工程,2005,14(6):75-78.JIN Jing,WU Xin-yue.Analysis of the Finite Element Mesh Problems
[14]  臧华,刘钊,文武松,等.苏通大桥辅桥箱梁节段水化热效应的仿真分析
[15]  [J].公路交通科技,2007,24(5):95-98.ZANG Hua,LIU Zhao,WEN Wu-song,et al.Simulation of Hydration Heat Effects on the Box Girder Segments of the Auxiliary Bridge for Sutong Bridge
[16]  [J].Journal of Highway and Transportation Research and Development,2007,24(5):95-98.
[17]  王卫锋,徐郁峰.肇庆西江大桥0#块空间仿真分析
[18]  [J].Computer Aided Engineering,2005,14(6):75-78.
[19]  黄志超,包忠诩,周天瑞,等.有限元网格划分技术研究
[20]  [J].南昌大学学报(理科版),2001,23(12):25-31.HUANG Zhi-chao,BAO Zhong-xu,ZHOU Tian-rui,et al.Automatic Node Reordering for Finite Element Analysis
[21]  [J].Journal of Nanchang University(Natural Science),2001,23(12):25-31.
[22]  李延龄.六面体有限元网格自动剖分技术研究
[23]  [D].郑州:郑州机械研究所,2002.LI Yan-lin.Research on the Automatic Generation Technique of Hexahedral Finite Element Mesh
[24]  [D].Zhengzhou:Zhengzhou Research Institute of Mechanical Engineering,2002.
[25]  韩友续.预应力混凝土连续刚构桥0块应力分析与测试研究
[26]  [D].西安:长安大学,2001.HAN You-xu.Stress Analysis and Measurement of Segment No.0 of Prestressed Concrete Continued Rigid Frame Bridge
[27]  [D].Xi'an:Chang'an University,2001.
[28]  徐大明,冯耀东.几种矩形板单元及其数值分析
[29]  [J].郑州大学学报(自然科学版),2001,33(1):14-18.XU Da-ming,FENG Yao-dong.Numerical Analysis to Some Rectangular Plate Elements
[30]  [J].Journal of Zhengzhuou University (Natural Science Edition),2001,33(1):14-18.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133