McDaniel C S, Webb B W, Slot jet impingement heat transfer from circular cylinders[J] International Journal of Heat and Mass Transfer, 2000, 43: 1975-1985
[2]
Gori F, Bossi L, Optimal slot height in the jet cooling of a circular cylinder[J] Applied Thermal Engineering, 2003, 23: 859-870
[3]
Nada S A, Slot/slots air jet impinging cooling of a cylinder for different jets-cylinder configurations[J] Heat Mass Transfer, 2006, 43: 135-148
[4]
Livingood J N B, Hrycak P, Impingement heat transfer from turbulent air jets to flat plates - a literature survey[D] NASA Technical Memorandum, 1970: NASA TM X-2778
[5]
Jambunathan K, Lai E, Moss M A, Button B L, A review of heat transfer data for single circular jet impingement[J] International Journal of Heat Fluid Flow, 1992, 13 (2):106-115
[6]
Martin H, Heat and mass transfer between impinging gas jets and solid surfaces, Advances in Heat Transfer, 13[M] New York: Academic Press, 1977: 1-60
[7]
Polat S, Huang B, Mujumdar A S, Douglas W J M, Numerical flow and heat transfer under imping jets: a review[M] Annual Review of Numerical Fluid Mechanics and Heat Transfer, 1989, Hemisphere Publishing Corp.:157——197
[8]
Down S J, James E H, Jet Impinging Heat Transfer-A literature Survey[J] ASME Journal of Heat Transfer, 1987: 87-35
[9]
Tabako W, Clevenger W, Gas turbine blade heat transfer augmentation by impingement of air jets having various configurations[J] ASME Journal of Engineering Power, 1972, 94:51-60
[10]
Bunker R S, Metzger D E, Local heat transfer in internally cooled turbine airfoil leading edge regions. Part I. Impingement cooling without film cooling extraction[J] ASME Journal of Turbomachine, 1990, 112:451-458
[11]
Gau C, Chung C M, Surface curvature effect on slot-air-jet impingement cooling flow and heat transfer process[J] ASME Journal of Heat Transfer, 1991, 113: 858-864
[12]
Sparrow E M, Alhomoud A, Impingement heat transfer at a circular cylinder due to an offset or non-offset slot jet[J] International Journal of Heat and Mass Transfer, 1984, 27:2297-2306
[13]
Chattopadhyay H, Saha S K, Turbulent flow and heat transfer from a slot jet impinging on a moving plate[J] International Journal of Heat Fluid Flow, 2003, 24: 685-697
[14]
Senter J, Solliec C, Flow field analysis of a turbulent slot air jet impinging on a moving flat surface[J] International Journal of Heat Fluid Flow, 2007, 28:708-719
[15]
Pekdemir T, Davies T W, Mass transfer from rotating circular cylinders in a submerged slot jet of air[J] International Journal of Heat Mass Transfer, 1998, 41: 3411-3450
[16]
Ma H T, Hao S F, Wang M H, Yang G L, Wang F C, Convective mass transfer from a horizontal rotating large-diameter cylinder[J] International Journal of Heat Mass Transfer, 2012, 55:1419-1422
[17]
Holman J P, Heat Transfer 9th ed.[M] 2002, New York: McGraw-Hill: 232
[18]
Moffat R J, Contributions to the theory of single-sample uncertainty analysis[J] ASME Journal of Fluids Engineering, 1982, 104:250-258
[19]
Ozerdem B, Measurement of convective heat transfer coefficient for a horizontal cylinder rotating in quiescent air[J] International Communications in Heat Mass Transfer, 2000, 27:389-395
[20]
Abdullah A K, An approximate solution of the convective heat transfer from an isothermal rotating cylinder[J] International Journal of Heat Fluid Flow, 1996, 17: 439-441
[21]
Churchill S W, Bernstein M, A correlating equation for forced convection from gases and liquids to a circular cylinder in crossflow[J] ASME Journal of Heat Transfer, 1977, 99:300-306
[22]
Whitaker S, Forced convection heat transfer correlations for flow in pipes, past flat plates, single cylinders, single spheres, and flow in packed beds and tubes bundles[J], AIChE Journal, 1972, 18: 361-371
