Wen Shizhu(温诗铸), Huang Ping(黄平). Principles of Tribology [M]. 4th ed. Beijing: Tsinghua University Press, 2012：284
[2]
Zhang Siwei(张嗣伟). Enormous economy potential of tribology application in industry in China——on the survey of present status of tribology application in industry[J]. China Surface Engineering(中国表面工程), 2008, 21(2): 50-52
[3]
Mu L W, Feng X, Zhu J H, Wang H Y,Sun Q J, Shi Y J, Lu X H. Comparative study of tribological properties with different fibers reinforced PTFE/PEEK composites at elevated temperatures[J]. Tribology Transactions, 2010, 53(2): 189-194
[4]
Shi Y J, Mu L W, Feng X, Lu X H. Tribological behavior of carbon nanotube and polytetrafluoroethylene filled polyimide composites under different lubricated conditions[J]. Journal of Applied Polymer Science, 2011, 121 (3): 1574-1578
[5]
Klamecki B E. Wear――an entropy production model[J]. Wear, 1980, 58: 325-330
[6]
Wang Huaiyuan(汪怀远), Yang Shuhui(杨淑慧), Zhang Shuai(张帅), Wang Guiying(汪桂英), Zhu Yanji(朱艳吉), Lin Shan(林珊). The finite element simulation for surface frictional heat of PEEK matrix composite [J].Polymer Materials Science and Engineering, 2013,29(3):182-190
[7]
Jakubinek M B, White M A, Mu M F, Winey K I. Temperature dependence of thermal conductivity enhancement in single-walled carbon nanotube/polystyrene composites[J].Applied Physics Letters,2010, 96:083105
[8]
Xu Nanping(徐南平), Shi Jun(时钧). Progress in material-oriented chemical engineering of China[J]. Journal of Chemical Industry and Engineering (China)(化工学报), 2003, 54(4): 423-426
[9]
Jin Wanqin(金万勤), Lu Xiaohua(陆小华),Xu Nanping(徐南平). Advances in materials-oriented chemical engineering (材料化学工程进展)[M]. Beijing: Chemical Industry Press, 2007:1-8
[10]
Zhu Yudan(朱育丹), Lu Xiaohua(陆小华), Guo Xiaojing(郭晓静), LuLinghong(吕玲红). Preliminary discussion on scientific connotation and research method of ,aterial-oriented chemical engineering: Understanding materials based on confined interfacial fluid behavior on mesoscale[J]. CIESC Journal(化工学报), 2013, 64(1): 148-154
[11]
Bhushan B. Modern Tribology Handbook[M]. Boca Raton: CRC Press LLC, 2001.235-236
[12]
Lu Xiaohua(陆小华). Thermodynamics and molecular simulation in Materials-oriented Chemical Engineering (材料化学工程中的热力学与分子模拟研究)[M]. Beijing: Science Press, 2011: 183-185
[13]
Ye Changming(叶昌明), Chen Yonglin(陈永林). Research progress of composite of polymer of thermal conductivity[J]. New Chemical Materials(化工新型材料), 2003, 31(2): 45-48
[14]
Mu L W, Shi Y J, Feng X, Zhu J H, Lu X H. The Effect of thermal conductivity and friction coefficient on the contact temperature of polyimide composites: experimental and finite element simulation[J]. Tribology International, 2012, 53：45-52
[15]
Pei Xianqiang(裴先强), Wang Qihua(王齐华), Wang Haijun(王海军). Actuality and prospect in research on fretting of polymers and polymer-based composites[J]. Journal of Materials Science & Engineering(材料科学与工程学报), 2004, 22: 446-451 Journal of Materials Science target="_blank">
[16]
Koike H, Kida K, Santos E C , Rozwadowska J, Kashima Y, Kanemasu K. Self-lubrication of PEEK polymer bearings in rolling contact fatigue under radial loads[J]. Tribology International, 2012, 49:30-38
[17]
Burris D L, Sawyer W G. A low friction and ultra low wear rate PEEK/PTFE composite[J]. Wear,2006, 261(3/4): 410-418
[18]
Dai Zhendong(戴振东), Xue Qunji(薛群基). Progress and development in thermodynamic theory of friction and wear[J]. Science in China(Series E:Technological Sciences)(中国科学 E 辑: 技术科学) 2009, 39(7): 1211-1215
[19]
Klamecki B E. A thermodynamic model of friction[J]. Wear, 1980, 63: 113-120
[20]
Klamecki B E. Energy dissipation in sliding[J]. Wear, 1982, 77: 115-128
[21]
Dai Zhendong(戴振东), Wang Min(王珉), Xue Qunji(薛群基). Introduction to Tribo-thermodynamics(摩擦体系热力学引论)[M]. Beijing: National Defence Industry Press, 2002:30-44
[22]
Huang Jianmeng(黄健萌), Gao Chenghui(高诚辉), Tang Xusheng (唐旭晟), Lin Xiezhao (林谢昭). Numerical Modeling and analysis of the thermal-structure coupling of the disc brake [J]. Chinese Journal Of Mechanical Engineering, 2008,44(2):145-151
[23]
Lu Xiaohua(陆小华), Ji Yuanhui(吉远辉), Liu honglai(刘洪来). Non-equilibrium thermodynamics analysis and its application for interfacial mass transfer[J]. Science China-Chemistry (中国科学:化学),2011,41(9): 1540-1547
[24]
Incropera F P, Dewitt D P, Bergman T L, Lavine A S. Fundamental of heat and Mass Transfer(传热和传质基本原理) [M]. Ge Xinshi(葛新石), Ye Hong(叶宏),trans. 6th ed. Beijing: Chemical Industry Press,2007:58-60
[25]
Pauschitz A, Roy M, Franek F. Mechanisms of sliding wear of metals and alloys at elevated temperatures[J]. Tribology International, 2008, 41(7): 584-602
[26]
West G H, Senior J M. High temperature plastics bearing compositions[J]. Tribology, 1973, 6(6): 269-275
[27]
Bijwe J, Kumar M, Gurunath P V, Desplanques Y, Degallaix G E. Optimization of brass contents for best combination of tribo-performance and thermal conductivity of non-asbestos organic (NAO) friction composites[J]. Wear, 2008, 265(5/6): 699-712
[28]
Lin Zijun(林子钧).Thermo-mechanical coupling numerical analysis of the temperature field of PTFE—based composites during friction[D]. Hefei: HeiFei University of Technology, 2010
[29]
Yevtushenko A A, Grzes, P. The FEM-modeling of the frictional heating phenomenon in the pad/disc tribosystem (a review)[J]. Numerical Heat Transfer, Part A: Applications, 2010, 58(3): 207-226
[30]
Su Haifu(苏海赋). Thermal-mechanical coupled finite element analysis on disc brake[D]. Guangzhou：South China University of Technology, 2011
[31]
Mu Liwen(穆立文). The influence of heat generation and transfer on the tribological porperties of polymer-based composites[D]. Nanjing: Nanjing University of Technology, 2012
[32]
Liu Ying(刘莹), Zhou Qixing(周启兴).Simulation of the friction temperature field for disc brake[J]. Journal of Nanchang University :Engineering & Technology(南昌大学学报:工科版), 2012, 34(3): 258-263
