Takagi M,Norimatsu T,Yamanaka T,et al. Development of deuterated polystyrene shells for laser fusion by means of a density matched emulsion method[J].Journal of Vacuum Science and Technology,1991,A9:2145-2148
[3]
Kubo U,Subakihara H.Development of a coating technique for inertial confinement plastic targets[J].Journal of Vacuum Science and Technology,1986,A4(3):1134-1137
[4]
Stephens R B,McQuillan B M,Miller W J.Prospects for 2 mm diameter NIF polymer capsules[R].GA-A22732,1997
[5]
Du Kai(杜凯),You Dan(游丹),Zhang Lin(张林).Improvement on preparation of PS microshells by microencapsulation[J].High Power Laser and Particle Beams(强激光与粒子束),1998,10(3):426-428
[6]
Du Kai(杜凯),You Dan(游丹).Initiation and elimination of vacuoles in microencapsulated shells[J].High Power Laser and Particle Beams(强激光与粒子束),2000,12(5):569-572
[7]
Li Bo(李波),Chen Sufen(陈素芬),Zhang Zhanwen(张占文).Initial study on fabrication of inner-Si-doped polystyrene capsules[J].High Power Laser and Particle Beams(强激光与粒子束),2004,16(8):1005-1008
[8]
Chen Sufen(陈素芬),Li Bo(李波),Liu Yiyang(刘一杨).Initial study on fabrication of inner-S-doped polystyrene capsules[J].Atomic Energy Science and Technology(原子能科学技术),2004,43(12):1062-1065
[9]
Chen Sufen(陈素芬),Li Bo(李波),Liu Yiyang(刘一杨).Investigation of PAMS capsule defects with microencapsulation method[J].High Power Laser and Particle Beams(强激光与粒子束),2012,24(1):89-92
[10]
Nagai K,Nakajima M,Norimatsu T,et al.Solvent removal during curing process of highly spheric and monodispersed-sized polystyrene capsules from density-matched emulsions composed of water and benzene/1,2-dichloroethane[J].Journal of Polymer Science:Part A:Polymer Chemistry,2000,38:3412-3418 3.0.CO;2-9 target="_blank">
[11]
McQuillan B W,Greenwood A.Microencapsulation process factors which influence the sphericity of 1 mm o.d.poly(α-methylstyrene)shells for ICF[J].Fusion Technology,1999,35(3):194-197
[12]
Takagi M,Cook R,Stephens R,et al.Stiffening of PAMS mandrels during curing[J].Fusion Technology,2000,38(7):50-53
[13]
Takagi M,Cook R,Stephens R,et al.Decreasing out-of-out in poly(α-methylstyrene)mandrels by increasing interfacial tension[J].Fusion Technology,2000,38(7):46-49
[14]
Takagi M,Cook R,McQuillan B,et al.Development of high quality poly(α-methylstyrene)mandrels for NIF[J].Fusion Technology,2000,41(5):278-285
[15]
Chen Sufen(陈素芬),Su Lin(苏琳),Liu Yiyang(刘一杨).Density match during fabrication process of poly(α-methylstyrene)mandrels by microencapsulation[J].High Power Laser and Particle Beams(强激光与粒子束),2012,24(7):1561-1565
[16]
Chen Sufen(陈素芬),Liu Yiyang(刘一杨).Wei Sheng(魏胜).Fabrication of millimeter-sized monodisperse poly(α-metylstyrene)capsules[J].High Power Laser and Particle Beams(强激光与粒子束),2012,24(11):2647-2650
[17]
Huang H,Stephens R B,Hill D W,et al.Automated batch characterization of ICF shells with vision-enabled optical microscope system[J].Fusion Science and Technology,2004,45(2):214-217
[18]
Letts S A,Fearon E M,Buckley S R,et al.Fabrication of polymer shells using a depolymerizable mandrel[J].Fusion Technology,1995,28(5):1797-1801
[19]
McQuillan B W,Nikroo A,Steinman D A,et al.The PAMS/GDP process for production of ICF target mandrel[J].Fusion Technology,1997,31(4):381-384
