Lee C,Lee J.Failure analysis of reinforced polyurethane foam-based LNG insulation structure using damage-coupled finite element analysis[J].Composite Structures,2014,107:231-245.
[4]
Yu Y,Kim B,Lee D.Cryogenic reliability of composite insulation panels for liquefied natural gas(LNG)ships[J].Composite Structures,2012,94:462-468.
[5]
Yu Y,Kim B,Lee D.Cryogenic reliability of the sandwich board for LNG ship[J].Composite Structures,2013,95:547-556.
[6]
Yoon S,Kim K,Lee D.Improvement for the adhesive peel strength of the secondary barrier with level difference for LNG containment system[J].Composite Structures,2013,95:528-538.
[7]
Bang C,Park C,Lee D.Optimum glass fiber volume frac-tion in the adhesive for the Al-SUS adhesively bonded joints at cryogenic temperatures[J].Composite Structures,2014,108:119-128.
[8]
Choi I,Yu Y,Lee D.Cryogenic sandwich-type insulation board composed of E-glass/epoxy composite and polymeric foams[J].Composite Structures,2013,102:61-71.
[9]
Choi S,Roh J,Kim M,Lee W.Analysis of two main LNG CCS(cargo containment system)insulation boxes for leakage safety using experimentally defined thermal properties[J].Applied Ocean Research,2012,37:72-89.
[10]
Chun M,Kim M,Kim W,Kim S,Lee J.Experimental investigation on the impact behavior of membrane-type LNG carrier insulation system[J].Journal of Loss Prevention in the Process Industries,2009,22:901-907.
[11]
Cho J R,Park S W,Kim H S,Rashed S.Hydroelastic analysis of insulation containment of LNG carrier by global-local approach[J].International Journal for Numerical Methods in Engineering,2008,76:749-774.
[12]
Roh S,Son G,Song G,Bae J.Numerical study of transient natural convection in pressurized LNG storage tank[J].Applied Thermal Engineering,2013,52:209-220.
[13]
Shi Guangzhi(时光志),Sheng Sujian(盛苏建).Heat transfer analysis and boil off rate calculation of independent type C cargo tank[J].Ship and Ocean Engineering(船海工程),2013,42(1):65-69.
[14]
Zhang Weixing(章伟星),Zhou Hao(周昊),Cai Zhuyi(蔡洙一),Chen Yingqiu(陈映秋),Liu Chuntu(柳春图).The temperature field analysis for the tank insulation system of 138000 m3 LNG carrier[J].Shipbuilding of China(中国造船),2008,49(1):77-82.
[15]
Li Boyang(李博洋).FE analysis on temperature field of cavity of membrane type LNG carrier based on ANSYS[J].Ship Engineering(船舶工程),2008,30(Z1):29-32.
[16]
Yu Xianghu(余祥虎).Research on the LNG carrier tank's thermal transfer and stress finite element analysis[D].Wuhan:Wuhan University of Technology,2009.
[17]
Ding Shifeng(丁仕风),Tang Wenyong(唐文勇),Zhang Shengkun(张圣坤).A research on temperature field and stress field of large-scale LNG ship[J].Ship Engineering(船舶工程),2008,30(5):16-19.
[18]
Chen Bozhen(陈伯真),Hu Yuren(胡毓仁).The tempera-ture distribution and thermal stress analysis of ship structures[J].Journal of Shanghai Jiao Tong University(上海交通大学学报),1995,29(3):33-41.
[19]
Ten Xiaoqing(滕晓青),Gu Yongning(顾永宁).Steady temperature distribution and thermal stress analysis for double hull structure[J].Shipbuilding of China(中国造船),2000,41(2):58-65.
[20]
Xia Huabo(夏华波),Sun Kecheng(孙恪成),Shi Guang-zhi(时光志),Lin Jianhui(林建辉),Peng Wenjun(彭文君),Wu Shuzhong(吴树忠).Analysis of liquid cargo tank heat transfer on 30000 m3 LNG ship[J].Ship Engineering(船舶工程),2014,36(2):34-36.
[21]
Faghri A,Zhang Yuwen,Howell J R.Advanced Heat and Mass Transfer[M].Columbia:Global Digital Press,2010:555-569.
