William M Goble, Harry Cheddie. Safety Instrumented Systems Verification:Practical Probabilistic Calculations[M]. The Instrumentation, Systems and Automation Society, 2005.
[2]
Roy Billinton, Ronald N Allan. Reliability Evaluation of Engineering Systems:Concepts and Techniques[M]. New York:Plenum Press, 1983.
[3]
Henley E J, Kumamoto H. Probabilistic Risk Assessment:Reliability Engineering, Design, and Analysis[M]. NJ:Piscataway, IEEE Press, 1992.
[4]
Goble W M. Control Systems Safety Evaluation and Reliability[M]. 2nd ed. NC:Research Triangle Park, ISA, 1998.
[5]
Bukowski J V. Modeling and analyzing the effects of periodic inspection on the performance of safety-critical systems[J]. IEEE Transactions of Reliability, 2001, 50(3):321-329.
[6]
Arner D C, Angstadt W C. Where for art thou failure rate data[EB]//Proceedings for ISA 2001-Houston. NC:Research Triangle Park, ISA, 2001.
[7]
Goble W M. Accurate failure metrics for mechanical instruments[C]//Proceedings of the IEC 61508 Conference (Augsberg, Germany), RWTUV, Jan 2003.
[8]
Dhillon B S. Reliability Engineering in Systems Design and Operation[M]:New York:Van Nostrand Reinhold, 1983.
[9]
Brombacher A C. Reliability by Design[M]. Chichester:John Wiley and Sons, 1992.
[10]
Lees F P. Loss Prevention for the Process Industries[M]. London:Butterworth and Heinemann, 1992.
[11]
Chastain J W. Ensuring consistency of corporate risk criteria//6th Global Congress on Process Safety[C]. San Antonio, Texas, 2010.
[12]
Layer of Protection Analysis-Simplified Process Risk Assessment[M]. New York:Center for Chemical Process Safety of the American Institute of Chemical Engineers, 2003.
Edward M Marszal, Eric W Scharpf. Safety Integrity Level Selection Including Layer of Protection Analysis[M]. NC:Research Triangle Park, ISA, 2003.
[15]
Johnson R W. Beyond-compliance uses of HAZOP/LOPA studies[J]. Journal of Loss Prevention in the Process Industries, 2010, 23(6):727-733.
[16]
Gubinelli G, Zanelli S,Cozzani V. A simplified model for the assessment of the impact probability of fragments[J]. Journal of Hazardous Materials, 2004, A116:175-187.
[17]
Guidelines for Enabling Conditions and Conditional Modifiers in Layer of Protection Analysis[M]. New York:Center for Chemical Process Safety, 2014.
[18]
TR84.00.02-2002, Technical Report. Safety Instrumented System (SIS)-Safety Integrity Level (SIL) Evaluation Techniques[R], NC:Research Triangle Park, ISA, 2002.
[19]
IEC 61508. Functional Safety of Electrical/Electronic/Programmable Electronic Safety-related Systems[S]. 2010.
[20]
ANSI/ISA-84.00.01-2004. Functional Safety:Safety Instrumented Systems for the Process Industry Sector-Part 1, 2 and 3[S] (IEC 61511 Mod). 2004.
[21]
Goble W M, Bukowski J V. Verifying common cause reduction rules for fault tolerant systems via simulation using a stress-strength failure model[J]. ISA Transactions, 2000.
