全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
化工学报  2015 

烧结矿余热回收竖罐内气固传热特性

DOI: 10.11949/j.issn.0438-1157.20150548, PP. 4418-4423

Keywords: 烧结,填充床,竖罐,多孔介质,传热系数

Full-Text   Cite this paper   Add to My Lib

Abstract:

以自制气固传热实验装置为操作平台,实验研究了烧结矿颗粒填充床内的气固传热特性。结果表明:气体表观流速和烧结矿颗粒直径是影响颗粒床层内气固传热过程的主要因素。气体表观流速越大,颗粒直径越小,床层内气固传热系数就越大。当烧结矿颗粒直径和气体表观流速一定时,床层内烧结矿颗粒温度的升高导致床层气固传热系数的增加和传热Nusselt数的减小。由于计算误差较大,现有的经验关联式不适用于求解烧结矿颗粒床层内的气固传热过程。基于量纲分析法,并结合实验测量数据拟合得出了能够描述烧结矿颗粒床层内气固传热特性的实验关联式,平均计算误差为4.22%,显示了良好的预测性能。

References

[1]  Cai Jiuju (蔡九菊), Wang Jianjun (王建军), Chen Chunxia (陈春霞), Lu Zhongwu (陆钟武). Waste heat recovery and utilization in iron and steel industry [J]. Iron and Steel (钢铁), 2007, 42 (6): 1-7.
[2]  Dong Hui (董辉), Zhao Yong (赵勇), Cai Jiuju (蔡九菊), Zhou Jiewang (周节旺), Ma Guangyu (马光宇). On the air leakage problem in sintering cooling system [J]. Iron and Steel (钢铁), 2012, 47 (1):95-99.
[3]  Marcelo R E, Luiz F M. Thermodynamic analysis of a coke dry quenching unit [J]. Energ. Convers. Manage., 2000, 41 (2): 109-127.
[4]  Dong Hui, Jia Fengrui, Zhao Yong, Wang Meng, Cai Jiuju. Experimental investigation on the drying process of the sinter mixture [J]. Powder Technol., 2012, 218: 1-4.
[5]  Cai Jiuju (蔡九菊), Dong Hui (董辉). The method and device of sintering waste heat recovery and utilization with vertical tank [P]: CN, 200910187381.8. 2009-09-15.
[6]  Dong Hui (董辉), Li Lei (李磊), Liu Wenjun (刘文军), Wang Bo (王博), Suo Yanshuai (索延帅), Cai Jiuju (蔡九菊). Process of waste heat recovery and utilization for sinter in vertical tank [J]. China Metallurgy (中国冶金), 2012, 22 (1): 6-11.
[7]  Wakao N, Kaguei S. Heat and Mass Transfer in Packed Beds [M]. New York: McGraw-Hill, 1982.
[8]  Whitaker S. Forced convection heat transfer correlations for flow in pipes, past flat plates, single cylinders, single spheres, and for flow in packed beds and tube bundles [J]. AIChE J., 1972, 18 (2): 361-371.
[9]  Kays W M, London A L. Compact Heat Exchangers [M]. New York: McGraw-Hill, 1984.
[10]  Nie Xiaodong, Evitts R, Besant R, Bolster J. A new technique to determine convection coefficients with flow through particle beds [J]. J. Heat Transfer, 2011, 133 (4): 41-60.
[11]  Kuwahara F, Shirota M, Nakayama A. A numerical study of interfacial convective heat transfer coefficient in two-energy equation model for convection in porous media [J]. Int. J. Heat Mass Tran., 2001, 44 (6): 1153-1159.
[12]  Abdulmohsin R S, Al-Dahha M H. Characteristics of convective heat transport in a packed pebble-bed reactor [J]. Nucl. Eng. Des., 2015, 284: 143-152.
[13]  Yang Jian, Wang Jing, Bu Shanshan, Zeng Min, Wang Qiuwang, Nakayama A. Experimental analysis of forced convective heat transfer in novel structured packed beds of particles [J]. Chem. Eng. Sci., 2012, 71 (26): 126-137.
[14]  Thakur N S, Saini J S, Solanki S C. Heat transfer and friction factor correlations for packed bed solar air heater for a low porosity system [J]. Sol. Energy, 2003, 74 (4): 319-329.
[15]  Pe?i? R, Radoi?i? T K, Bo?kovi?-Vragolovi? N, Arsenijevi? Z, Grbav?i? ?. Heat transfer between a packed bed and a larger immersed spherical particle [J]. Int. J. Heat Mass Tran., 2014, 78: 130-136.
[16]  Cong T N, He Yurong, Chen Haisheng, Ding Yulong, Wen Dongsheng. Heat transfer of gas-solid two-phase mixtures flowing through a packed bed under constant wall heat flux conditions [J]. Chem. Eng. J., 2007, 130 (1): 1-10.
[17]  Geldart D. Estimation of basic particle properties for use in fluid-particle process calculations [J]. Powder Technol., 1990, 60 (1): 1-13.
[18]  Klerk A D. Voidage variation in packed beds at small column to particle diameter ratio [J]. AIChE J., 2003, 49 (8): 2022-2029.
[19]  Gupta A S, Thodos G. Mass and heat transfer in the flow of fluids through fixed and fluidized beds of spherical particles [J]. AIChE J., 1962, 8 (5): 608-610.
[20]  Ranz W E, Marshall W R. Evaporation from drops [J]. Chem. Eng. Prog., 1952, 48: 141-146.
[21]  Gupta S N, Chaube R B, Upadhyay S N. Fluid-particle heat transfer in fixed and fluidized beds [J]. Chem. Eng. Sci., 1974, 29 (3): 839-843.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133