Kantz M R, Newman J R, Stigale F H. The skin-core morphology and structure-property relationships in injection-moulded polypropylene [J]. J. Appl. Polym. Sci., 1972, 16: 1249-1260
[2]
Katti S S, Schultz J M. Microstructure of injection molded semicrystalline polymer [J]. Polym. Eng. Sci., 1982, 22: 1001-1017
[3]
Jan-Willem Housmans, Markus Gahleitner, Gerrit W M Peters. Structure-property relations in molded, nucleated isotactic polypropylene [J]. Polymer, 2009, 50: 2304-2319
[4]
Viana J C, Cunha A M. The thermomechanical environment and the microstructure of an injection moulded polypropylene copolymer [J]. Polymer, 2002, 43: 4185-4196
[5]
Ito H, Yagisawa Y, Saito T, Yasuhara T, Kikutani T, Yoshitoshi Y. Fundamental study on structure development of thin-wall injection molded products [J]. Theor. Appl. Mech. Japan, 2005, 54: 263-268
[6]
Julien Giboz, Thierry Copponnex, Patrice Mélé. Microinjection molding of thermoplastic polymers: morphological comparison with conventional injection molding [J]. Journal of Micromechanics and Microengineering, 2009, 19(2): 1-12
[7]
Liu Fanghui, Guo Chao, Wu Xian, Qian Xinyuan, Liu Hong, Zhang Jie. Morphological comparison of isotactic polypropylene parts prepared by micro injection molding and conventional injection molding [J]. Polym. Adv. Technol., 2012, 23(3): 686-694
[8]
Guo Chao, Liu Fanghui, Wu Xian, Liu Hong, Zhang Jie. Morphological evolution of HDPE parts in the microinjection molding: comparison with conventional injection molding [J]. Journal of Applied Polymer Science, 2012, 126(2): 452-462
[9]
Tham Nguyen-Chung, Gabor Jiittner, Tung Pham, Giinter Mennig. Relevant aspects in modeling of micro-injection molding//The 15th International Congress on Rheology, The Society of Rheology 80th Annual Meeting. AIP Conference Proceedings[C].2008, 1027: 142-144
[10]
Li Shuang(李爽), Wang Lixia(王利霞), Li Qian(李倩), Zheng Jianqi(郑谏齐), Wang Xinchao(王心超), Qin Zhihui(秦智慧), Shen Changyu(申长雨). Morphology of micro injection molded polypropylene parts [J]. Polymer Materials Science & Engineering(高分子材料科学与工程), 2013(5): 74-78
[11]
Li Shuang(李爽). Analysis of formability and morphology of iPP micro injection molded parts [D]. Zhengzhou:Zhengzhou University, 2013
[12]
Wang Jiajia(王佳佳). Influence of shear history on morphology and mechanical properties of micro injection molded parts [D]. Zhengzhou: Zhengzhou University, 2014
[13]
Lin Xiang, Caton-Rose Fin, Ren Dongyun, Wang Kuisheng, Coates Phil. Shear-induced crystallization morphology and mechanical property of high density polyethylene in micro-injection molding [J]. Journal of Polymer Research, 2013, DOI: 10.1007/s10965-013-0122-8
[14]
Kamal M R, Chu J, Derdouri S, Hrymak A. Morphology of microinjection moulded polyoxymethylene [J]. Plastics Rubber and Composites, 2010, 39(7): 332-341
[15]
Chu J. Characterization of the micro injection molding process and its products [D]. Montreal:McGill University, 2009
[16]
Tom Alan M, Layser Gregory S,Coulter John P. Mechanical property determination of micro injection molded tensile test specimens//Proceedings of Annual Technical Conference [C]. 2006, 5: 2541-2545
[17]
Steve Meister, Ariane Jungmeier, Dietmar Drummer. Long-term properties of injection-molded micro-parts: influence of part dimensions and cooling conditions on aging behavior [J]. Macromol. Mater. Eng., 2012, 297: 994-1004
[18]
Yutaka Kobayashi, Hiroaki Kanno, Yasuhiro Hanamoto, Makoto Ando, Toshitaka Kanai. Relating micro hardness to injection moldinginduced morphology: a study of microbeam synchrotron WAXD [J]. Journal of Applied Polymer Science, 2010, 116: 1823-1831
[19]
Zhang Yang(张扬), Liu Xiaodong(刘晓东), Meng Xing(孟杏), Wu Nan(伍楠), Dong Gexi(董格希), Wang Xinchao(王心超), Wang Lixia(王利霞). Influence of processing conditions on tensile properties of micro injection molded isotactic polypropylene [J]. Engineering Plastics Application(工程塑料应用), 2014, 42(2): 47-50
[20]
Yang Can. Flow-induced morphology evolution of uniformly miniaturized high-density polyethylene parts prepared by micro-injection molding [J]. International Journal of Advanced Manufacturing Technology, 2013, 68: 1745-1755
[21]
Baldi F, Bongiorno A, Fassi I, Franceschini A, Pagano C, RiccòT, Surace R, Tescione F. Process-property-structure relationship in miniaturized injection moulded polyoxymethylene samples [J]. Polymer Engineering and Science, 2014, 54(3): 512-521
