全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
化工学报  2015 

自泵送流体动压型机械密封性能分析

DOI: 10.11949/j.issn.0438-1157.20141035, PP. 687-694

Keywords: 机械密封,自泵送,力学性能,计算机模拟,数值分析

Full-Text   Cite this paper   Add to My Lib

Abstract:

基于离心泵工作原理提出了一种自泵送流体动压型机械密封,并运用Fluent软件对自泵送型槽进行了三维流场动力学仿真分析,探讨了几何参数和工况参数对自泵送流体动压型机械密封性能即端面开启力和泄漏率的影响。研究结果表明:转速增大,开启力和泄漏率均减小;介质压力、槽台宽比、引流孔孔径及螺旋角增大,开启力和泄漏率均增大;随着槽数、槽长坝长比的增大,开启力均有所降低,泄漏率略有增大;槽深对开启力和泄漏率的影响趋势相似,存在一个使开启力较大而泄漏率较小的槽深;通过型槽参数匹配,自泵送流体动压型机械密封可以获得足够的开启力和较低的泄漏率。

References

[1]  Sun Jianjun(孙见君), Wang Min(王敏), Zhou Min(周敏), Tu Qiao'an(涂巧安). Self-pumping mech-anical seal based on fluid dynamic pressure principle [P]: CN, 103267132A. 2013-08-28
[2]  Hu J B, Tao W J, Zhao Y M, et al. Numerical analysis of general groove geometry for dry gas seals [J]. Applied Mechanics and Materials, 2014, 457: 544-551
[3]  Li Yun(李云), Jiang Peizheng(姜培正). Peocess Fluid Machiney(过程流体机械)[M]. Beijing: Chemical Industry Press, 2010
[4]  Xia Qing(夏清), Chen Changgui(陈常贵). Principles of Chemical Engineering(化工原理)[M]. Tianjin: Tianjin University Press, 2009
[5]  Hu X P, Song P Y. Theoretic analysis of the effect of real gas on the performance of the T-groove and radial groove dry gas seal [J]. Applied Mechanics and Materials, 2013, 271: 1218-1223
[6]  Etsion I. A new concept of zero-leakage non-contacting face seal [J]. Journal of Tribology, 1984, 106(3):338-343
[7]  Fischbach M J. Dry seal applications in centrifugal compressors [J]. Hydrocarbon Processing, 1989, 68(10): 47-51
[8]  Lai T. Development of non-contacting, non-leaking spiral groove liquid face seals [J]. Lubrication Engineering, 1994, 50(8): 625-631
[9]  Wang B, Zhang H, Cao H. Flow dynamics of a spiral-groove dry-gas seal [J]. Chinese Journal of Mechanical Engineering, 2013, 26(1): 78-84
[10]  Buck G S, Volden D. Upstream pumping: a new concept in mechanical sealing technology [J]. Lubrication Engineering, 1990, 46(4): 213-217
[11]  Qiu Y, Khonsari M M. Thermo hydrodynamic analysis of spiral groove mechanical face seal for liquid applications [J]. Journal of Tribology, 2012, 134(2): 021703-021713
[12]  Lai Weitang. Face seal with double spiral grooves[P]: US, 5201531A. 1993-04-13
[13]  Wang Yuming(王玉明), Li Keyong(李克永). End face seal of double loop with S-piral groove [P]: CN, 96108614.9. 1996-06-22
[14]  Hao Muming(郝木明), Hu Danmei(胡丹梅), Ge Jingpeng(葛京鹏), Yang Huixia(杨惠霞). Self-lubricating non-contact mechanical seal with double rows of fluid dynamic pressure groove [P]: CN, 00239202.X. 2000-06-13
[15]  Li Y, Song P Y, Xu H J. Performance analyses of the spiral groove dry gas seal with inner annular groove [J]. Applied Mechanics and Materials, 2013, 420: 51-55
[16]  Wang Q, Chen H L, Liu T, et al. Research on performance of upstream pumping mechanical seal with different deep spiral groove//IOP Conference Series: Earth and Environmental Science [C]. IOP Publishing, 2012, 15(7): 072019-072027
[17]  Basu P. Analysis of a radial groove gas face seal [J]. Tribology Transactions, 1992, 35(1): 11-20
[18]  Nicolescu B N, Petrescu T C. Homogenization of the Reynolds equation in the radial face seals case [J]. Asymptotic Analysis, 2013, 81(1): 35-52
[19]  Ruan B. Finite element analysis of the spiral groove gas face seal at the slow speed and the low pressure conditions-slip flow consideration [J]. Tribology Transactions, 2000, 43 (3): 411-418

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133