Sauciua I, Chrysler G, Mahajon R. Spreading in the heat sink base: phase change systems or solid metals [J]. IEEE Trans. Compon. Pack. Technol., 2002 (25): 621-628
[2]
Dunn P D, Reay D A. Heat Pipes [M]. 4th ed. New York: Pergamon Press Ltd., 1994
[3]
Koito Y, Imura H, Mochizuki M, et al. Theoretical study on heat transfer characteristics of a vapor chamber [J]. Thermal Science and Engineering, 2005, 13 (1): 23-30
[4]
Koito Y, Imura H, Mochizuki M, et al. Fundamental investigations on heat transfer characteristics of heat sinks with a vapor chamber//Proc. 7th Int. Heat Pipe Symposium [C]. 2003: 247-251
[5]
Lin C Y, Leong K C, Wong Y W, Tan F L. Performance study of flat plate heat pipe//Proceedings of the International Conference on Energy and Environment [C]. Shanghai, 1995: 512-518
[6]
Prasher R S. A simplified conduction based modeling scheme for design sensitivity study of thermal solution utilizing heat pipe and vapor chamber technology [J]. Journal of Electronic Packaging, 2003, 125 (3): 378-385
[7]
Chen Y S, Chien K H, Wang C C, et al. Investigations of the thermal spreading effects of rectangular conduction plates and vapor chamber [J]. Journal of Electronic Packaging, 2007, 129 (3): 348-355
[8]
Qi Xingming (岂兴明), Su Junlin (苏俊林) Jiao Jinyi (矫津毅). Heat transfer characteristics of miniflat heat pipe [J]. Journal of Jilin University: Engineering and Technology Edition (吉林大学学报: 工学版), 2006, 36 (5): 669-672
[9]
Boukhanouf R, Haddad A, North M T, Buffone C. Experimental investigation of a flat plate heat pipe performance using IR thermal imaging camera [J]. Applied Thermal Engineering, 2006, 26 (17/18): 2148-2156
[10]
Ogushi T, Murakami M, Masumoto H, et al. Study on newly developed flat plate type heat pipe heat sink [J]. ASME HTD, 1988, 96: 517-521
[11]
Xuan Y, Hong Y, Li Q. Investigation on transient behaviors of flat plate heat pipes [J]. Experimental Thermal and Fluid Science, 2003, 28 (2): 249-255
[12]
Hsieh S S, Lee R Y, Shyu J, et al. Analytical solution of thermal resistance of vapor chamber heat sink with and without pillar [J]. Energy Conversion and Management, 2007, 48 (10): 2708-2717
[13]
Hsieh S S, Lee R Y, Shyu J, et al. Thermal performance of flat vapor chamber heat spreader [J]. Energy Conversion and Management, 2008, 49 (6): 1774-1784
[14]
Bai Tong (白穜), Zhang Hong (张红), Xu Hui (许辉), Ding Li (丁莉). Performance study on a novel combined wick of heat pipe [J]. Proceedings of CSEE (中国电机工程学报), 2011,31 (23): 79-85
[15]
Moffat R J. Using uncertainty analysis in the planning of an experiment [J]. Journal of Fluids Engineering, 1985, 107 (2): 173-179
