Chen R, Lu F Y, Lin Y L, et al. Mechanical behavior and constitutive model of pressed aluminized explosive [J]. Chinese Journal of Energetic Materials, 2007, 15(5): 460-463. (in Chinese)
Zhou D, Huang F L, Yao H S. Study on the visco-elastic constitutive model of PBX [J]. Transactions of Beijing Institute of Technology, 2007, 27(11): 945-948. (in Chinese)
Wu H M, Lu F Y. Research on constitutive relation of a polymer bonded explosive and pressed Comp. B [J]. Chinese Journal of High Pressure Physics, 2005, 19(2): 139-144. (in Chinese)
Li M, Zhang J, Li J M, et al. Experimental investigation to the damage location of PBX mechanical failure at mesocale [J]. Chinese Journal of Energetic Materials, 2005, 13(2): 79-83. (in Chinese)
Wu H M, Lu F Y, Lu L, et al. Microstructure fractural characteristics of energetic materials under compressive loading [J]. Chinese Journal of High Pressure Physics, 2005, 19(3): 213-218. (in Chinese)
Chen R. Experimental studies on mechanical properties of a PBX under various dynamic loading conditions [D]. Changsha: National University of Defense Technology, 2010. (in Chinese)
Balzer J E, Siviour C R, Walley S M, et al. Behaviour of ammonium perchlorate-based propellants and a polymer-bonded explosive under impact loading [J]. Proceedings of the Royal Society of London Series a-Mathematical Physical and Engineering Sciences, 2004, 460(2043): 781-806.
[14]
Williamson D M, Siviour C R, Proud W G, et al. Temperature-time response of a polymer bonded explosive in compression (EDC37) [J]. J Phys D: Appl Phys, 2008, 41(8): 1-11.
[15]
Govier R K, Gray G T, Blumenthal W R. Comparison of the influence of temperature on the high-strain-rate mechanical responses of PBX 9501 and EDC37 [J]. Metall Mater Trans A, 2008, 39(3): 535-538.
[16]
Cady C M, Blumenthal W R, Gray G T, et al. Mechanical properties of plastic-bonded explosive binder materials as a function of strain-rate and temperature [J]. Polymer Engineering and Science, 2006, 46(6): 812-819.
[17]
Blumenthal W R, Gray G T, Idar D J, et al. Influence of temperature and strain rate on the mechanical behavior of PBX 9502 and Kel-F 800 (TM) [C]//Furnish M D, Chhabildas L C, Hixson R S. Shock Compression of Condensed Matter-1999. Snowbird, Utah: AIP, 2000: 671-674.
[18]
Blumenthal W R, Thompson D G, Cady C D, et al. Compressive properties of PBXN-110 and its HTPB-based binder as a function of temperature and strain rate [C]//Proceedings of 12th International Symposium on Detonation. San Diego, CA: NSWC, 2002.
[19]
Wen M P, Pang H Y, Tian Y, et al. Regulations of plane strain fracture toughness of PBX changed with temperatures [J]. Chinese Journal of Explosives & Propellants, 2005, 28(3): 63-65. (in Chinese)
Qin J, Lin Y L, Lu F Y, et al. Dynamic compressive properties of a PBX analog as a function of temperature and strain rate [C]//Proulx T. Conference Proceedings of the Society for Experimental Mechanics Series. New York: Springer, 2011: 141-146.
[22]
He P S. Structure and Properties of Polymers [M]. Beijing: Scientifical and Technical Publisher, 2008. (in Chinese)
