Xu J H, Wang M. Study on internal threads in high strength steels by cold form tapping [J]. Journal of Materials Engineering, 2000, 4(11): 41-44. (in Chinese)
Miao H, Zuo D W, Zhang R H, et al. Experimental research on cold extruding of internal thread in Q460 high-strength-steel [J]. Journal of Mechanical Engineering, 2011, 47(13): 160-166. (in Chinese)
Xu X J, Zhang X F, Liu G L, et al. Work-piece length of the effect on stress and analysis of cracking-criterion under equal channel angular pressing [J]. Journal of Mechanical Engineering, 2008, 44(1): 223-226. (in Chinese)
Miao H, Zuo D W, Wang M, et al. Simulation and experimental research on residual stresses in precipitation-hardening layer of NAK80 steel for shot peening [J]. Chinese Journal of Mechanical Engineering, 2011, 24(3): 439-445.
[8]
Miao H, Zuo D W, Zhang M, et al. Research on metal flow of internal thread of high strength steel during cold extrusion for aircraft landing gear [J]. China Mechanical Engineering, 2010, 21(14): 1714-1718. (in Chinese)
Chen J J, Shih Y S. A study of the helical effect on the thread connection by three dimensional finite element analysis [J]. Nucl Eng Des, 1999, 191(2): 109-116.
[11]
Zhu D C, Sun Y, Song M Z, et al. Effect of alloy elements on the microstructure and properties of Cu-Te-Cr alloys during aging process [J]. Journal of Sichuan University(Engineering Science Edition), 2007, 5(39): 97-100. (in Chinese)
Li Y, Cai J, Zou Y, et al. The microstructures in 0. 20%C carbon steel induced by high-current pulsed electron beam [J]. Chinese Journal of High Pressure Physics, 2011, 25(3): 268-274. (in Chinese)
Chen Y N, Wei J F, Zhao Y Q, et al. Microstructure and mechanical properties of Ti14 alloy after semi-solid deformation [J]. Rare Metal Materials and Engineering, 2009, 38(10): 1822-1825. (in Chinese)
