全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

变燃速发射药两相流内弹道模型及数值模拟

DOI: 10.11858/gywlxb.2012.01.015, PP. 102-106

Keywords: 内弹道,两相流,变燃速发射药,数值模拟

Full-Text   Cite this paper   Add to My Lib

Abstract:

为了更好地描述变燃速发射药的膛内燃烧及内弹道过程,对中心开孔式双层结构的变燃速发射药建立了一维两相流内弹道数学模型,在Φ30mm火炮装填条件下采用二阶精度的Lax-Wendroff差分格式进行计算,得到了数值解。计算结果表明:膛内压力和炮口初速度变化曲线的计算值与实测值符合较好,说明此两相流内弹道模型可以准确地反映变燃速发射药的内弹道过程;变燃速发射药可以有效地减少膛内压力波的产生,对于安全射击具有重要意义。通过对气、固相速度及膛内压力波等计算参数进行分析,可以对变燃速发射药的内弹道过程研究起指导作用。

References

[1]  Jin Z M, Weng C S. Advanced interior ballistics [M]. Beijing: Higher Education Press, 2003. (in Chinese)
[2]  金志明, 翁春生. 高等内弹道学 [M]. 北京: 高等教育出版社, 2003.
[3]  Yuan Y X, Zhang X B. Fundamentals of multiphase flow dynamics at high temperature and high pressure [M]. Harbin: Harbin Institute of Technology Press, 2005. (in Chinese)
[4]  袁亚雄, 张小兵. 高温高压多相流体动力学基础 [M]. 哈尔滨: 哈尔滨工业大学出版社, 2005.
[5]  Mickovic D, Jaramaz S. Two-phase flow model of gun interior ballistics [A]//Proceedings of 19th International Symposium of Ballistics [C]. Interlaken, Switzerland, 2001: 65-72.
[6]  He Z D, Liu Y P, Ma Z L, et al. Low temperature sensitivity of variable-burning rate gun propellant [J]. Chinese Journal of Explosives & Propellants, 2006, 29(1): 65-67. (in Chinese)
[7]  贺增弟, 刘幼平, 马忠亮, 等. 变燃速发射药低温感性能 [J]. 火炸药学报, 2006, 29(1): 65-67.
[8]  Liu L L, Ma Z L, Xiao Z L. Research on the actual combustion and interior ballistics process of the variable-burning rate propellant in cannon [J]. Acta Armamentarii, 2010, 31(4): 409-413. (in Chinese)
[9]  刘林林, 马忠亮, 萧忠良. 变燃速发射药膛内燃烧与内弹道过程研究 [J]. 兵工学报, 2010, 31(4): 409-413.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133