Stefani F, Levinson S, Satapathy S, et al. Electrodynamic transition in solid armature railguns [J]. IEEE Trans Magn, 2001, 37(1): 101-105.
[2]
Rogeon P, Dechalotte F, Raoelison R, et al. A microscopic approach to determine electrothermal contact conditions during resistance spot welding process [J]. J Heat Transf, 2008, 131(2): 022101.
[3]
Chen W W, Kim W, Wang Q J. Transient thermomechanical analysis of sliding electrical contacts of elastoplastic bodies, thermal softening, and melting inception [J]. J Tribology, 2009, 131(2): 021406.
[4]
Yovanovich M M. Four decades of research on thermal contact, gap, and joint resistance in microelectronics [J]. IEEE Trans Compon Packag Technol, 2005, 28(2): 182-206.
[5]
Bansal D G, Streator J L. Behavior of copper-aluminum tribological pair under high current densities [J]. IEEE Trans Magn, 2009, 45(1): 244-249.
[6]
Kim B K, Hsieh K T, Bostick F X. A three-dimensional finite element model for thermal effect of imperfect electric contacts [J]. IEEE Trans Magn, 1999, 35(1): 170-174.
[7]
Coffo M, Gallant J. Simulation of the current distribution and the heat load of a brush projectile in a railgun with the finite element code ANSYS [J]. Acta Physica Polonica Ser A, 2009, 115(6): 1112-1114.
[8]
Hsieh K T, Satapathy S, Hsieh M T. Effects of pressure-dependent contact resistivity on contact interfacial conditions [J]. IEEE Trans Magn, 2009, 45(1): 313-318.
[9]
Xia S, He J, Chen L, et al. Studies on interference fit between armature and rails in railguns [J]. IEEE Trans Plasma Sci, 2011, 39(1): 186-191.
[10]
Li X, Weng C S. Three-dimensional numerical simulation of unsteady electromagnetic effect in block solid armature [J]. Journal of Ballistics, 2009, 21(1): 103-106. (in Chinese)
Tao Q Q, Lü Q A, Li H, et al. Finite element analysis of electromagnetic rail launchers [J]. Journal of Gun Launch & Control, 2011(1): 54-56. (in Chinese)
Li Q, Fan C Z, Jia Y Z, et al. Rail and armature joule heating of an electromagnetic rail gun [J]. Journal of Ballistics, 2006, 18(4): 38-40. (in Chinese)
Yu X, Fan Z. Simulation and two-objective optimization of the electromagnetic-railgun model considering VSEC resistance and contact resistance [J]. IEEE Trans Plasma Sci, 2011, 39(1): 405-410.
[17]
Powell J D, Zielinski A E. Ohmic heating in a double-taper sabot-armature [J]. IEEE Trans Magn, 2003, 39(1): 153-157.
