Hansen N, Mehl R F, Medalist A. New discoveries in deformed metals [J]. Metall Mater Trans A, 2001, 32(12): 2917-2935.
[2]
Zhang Q Y, Dong C, Zou G T, et al. Stacking fault tetrahedra in single-crystal aluminum induced by high-current pulsed electron beam [J]. Acta Physica Sinica, 2008, 57(1): 392-397. (in Chinese)
Guan Q F, Yang P L, Zou H, et al. Nanocrystalline and amorphous surface structure of 0. 45%C steel produced by high current pulsed electron beam [J]. J Mater Sci, 2006, 41(2): 479-483.
[5]
Guan Q F, Zou H, Zou G T, et al. Surface nanostructure and amorphous state of a low carbon steel induced by high-current pulsed electron beam [J]. Surf Coat Technol, 2005, 196(1/2/3): 145-149.
[6]
Proskurovsky D I, Rotshtein V P, Ozur G E, et al. Pulsed electron-beam technology for surface modification of metallic materials [J]. J Vac Sci Technol A, 1998, 16(4): 2480-2488.
[7]
Proskurovsky D I, Rotshtein V P, Ozur G E, et al. Physical foundations for surface treatment of materials with low energy, high current electron beams [J]. Surf Coat Technol, 2000, 125(1/2/3): 49-56.
[8]
Zou J X, Zhang K M, Hao S Z, et al. Mechanisms of hardening, wear and corrosion improvement of 316 L stainless steel by low energy high current pulsed electron beam surface treatment [J]. Thin Solid Films, 2010, 519(4): 1404-1415.
[9]
Li Y, Gu Q Q, Qiu D H, et al. Texture and structural defect evolution of pure nickel subjected to high-current pulse electron beam irradiation [J]. Chinese Journal of High Pressure Physics, 2010, 24(6): 461-466. (in Chinese)
Qiu D H, Cheng D Q, Guan Q F, et al. Surface stress characteristics in pure nickel after high current pulsed electron beam irradiation [J]. Chinese Journal of High Pressure Physics, 2009, 23(5): 321-326. (in Chinese)
Li Y, Cai J, Zou Y, et al. The microstructures in 0. 20%C carbon steel induced by high-current pulsed electron beam [J]. Chinese Journal of High Pressure Physics, 2011, 25(3): 268-274. (in Chinese)
Zhang K, Zou J, Grosdidier T, et al. Formation and evolution of craters in carbon steels during low-energy high-current pulsed electron-beam treatment [J]. J Vac Sci Technol A, 2009, 27(5): 1217-1226.
[16]
Cai J, Zou Y, Wan M Z, et al. Rapid preparation and characterization of the surface microstructures of AISI 304L austenitic stainless steel by high-current pulsed electron beam [J]. Chinese Journal of High Pressure Physics, 2012, 26(6): 693-699. (in Chinese)
Peng D J, Zou Y, Wan M Z, et al. Influence of surface state on the crater formation of metallic material surface irradiated by high current pulsed electron beam [J]. Chinese Journal of High Pressure Physics, 2013, 27(1): 99-104. (in Chinese)
Zou J, Zhang K, Dong C, et al. Selective surface purification via crater eruption under pulsed electron beam irradiation [J]. Appl Phys Lett, 2006, 89(4): 041913.
[21]
Zhang K M, Yang D Z, Zou J X, et al. Surface modification of 316L stainless steel by high current pulsed electron beam: Part Ⅱ corrosion behaviors in the simulated body fluid [J]. Acta Metallurgica Sinica, 2007, 43(1): 71-76. (in Chinese)
Guan Q F, Zou Y, Zhang Z Q, et al. Microstructures and corrosion property of pure copper under high-current pulsed electron beam irradiation [J]. Journal of Jilin University (Engineering and Technology Edition), 2013, 43(4): 964-969. (in Chinese)
Qin Y, Dong C, Wang X, et al. Temperature profile and crater formation induced in high-current pulsed electron beam processing [J]. J Vac Sci Technol A, 2003, 21(6): 1934-1938.
[26]
Shulov V A, Nochovnaya N A. Crater formation on the surface of metals and alloys during high power ion beam processing [J]. Nucl Instrum Meth B, 1999, 148: 154-158.