Chen Y, Liu L, Wang Y H, et al. Microstructure evolution and thermal expansion of Cu-Zn alloy after high pressure heat treatment [J]. Trans Nonferrous Met Soc China, 2011, 21(10): 2205-2209.
[3]
Wu L L, Liu L, Liu J H, et al. Effects of high pressure heat treatment on microstructure and micro-mechanical properties of Cu77. 96Al22. 04 alloy [J]. Mater Trans, 2012, 53(3): 504-507.
[4]
Wang H Y, Liu J H, Peng G R, et al. Effects of high-pressure heat treatment on the solid-state phase transformation and microstructures of Cu61. 13Zn33. 94Al4. 93 alloys [J]. Chin Phys B, 2010, 19(9): 096203.
[5]
Chen Y, Liu L, Liu J H, et al. Effect of high pressure treatment on microstructure and resistivity of Cu75. 15Al24. 85 alloy [J]. Acta Physica Sinica, 2012, 61(17): 176103. (in Chinese)
Wang Q, Wang X, Mi W Y. Reason analysis of cracks on the outside surface after gun barrel chromium-plating [J]. Ordnance Material Science and Engineering, 2011, 34(5): 94-96. (in Chinese)
Du X D, Ding H F, Cui F M. Effect of impact work on impact corrosion-abrasion mechanism of ZGMn13 cast steel [J]. Transactions of the Chinese Society for Agricultural Machinery, 2006, 37(11): 143-147. (in Chinese)
Zhang S J, Li W X. The effect of Zr to the grain size and as-cast mechanical properties of magnesium alloy Mg-Ce [J]. Light Alloy Fabrication Technology, 2003, 31(2): 16-18. (in Chinese)
Li W S, Wang Z P, Lu Y, et al. Mechanical and tribological properties of a novel aluminum bronze material for drawing dies [J]. Wear, 2006, 261(2): 155-163.
[14]
Badawy W A, El-Sherif R M, Shehata H. Electrochemical behavior of aluminum bronze in sulfate-chloride media[J]. J Appl Electrochem, 2007, 37(10): 1099-1106.
[15]
Mahmoud S S. Inhibition of pitting corrosion of aluminum bronze in sodium chloride solution [J] . Corrosion, 2008, 64(9): 727-732.
[16]
Cui K. Ferrous and Nonferrous Metal Materials [M]. Beijing: China Machine Press, 1986: 424-426. (in Chinese)
[17]
崔崑. 钢铁材料及有色金属材料 [M]. 北京: 机械工业出版社, 1986: 424-426.
[18]
Shu D L. Mechanical Properties of Metals [M]. Beijing: China Machine Press, 1994: 53-55. (in Chinese)
