王新华, 郑秋月, 蔡力钢, 孙树文. 基于CFD的圆形静压油垫数值仿真技术研究[J]. 航空精密制造技术, 2010, 46(2): 17―20. Wang Xinhua, Zheng Qiuyue, Cai Ligang, Sun Shuwen. Numerical simulation research of round hydrostatic oil pads based on CFD [J]. Aviation Precision Manufacturing Technology, 2010, 46(2): 17―20. ( in Chinese)
[2]
Kang Y, Chou H C, Wang Y P, et al. Dynamic behaviors of a circular worktable mountend on closed-type hydrostatic thrust bearing compensated by constat compensations [J]. Mechanics, 2013, 29(2): 297―308.
[3]
Garratt JE, Hibberd S, Cliffe KA, Power H. Centrifugal inertia effects in high-spead hydrostatic air thrust bearing [J]. Engineering Math, 2012, 76(1): 59―80.
[4]
叶红玲, 文聘, 张颜明, 李耀明. 基于多层可行方向法液体静压转台优化设计[J]. 工程力学, 2014, 31(2): 249―256. Ye Hongling, Wen Pin, Zhang Yanming, Li Yaoming. Design optimization of hydrostatic worktable based on multi-layer method of feasible direction [J]. Engineering Mechanics, 2014, 31(2): 249―256. (in Chinese)
[5]
Manring N D, Johnson R E, Cherukuri H P. The Impact of Linear deformations on stationary hydrostatic thrust bearings [J]. Tribology, 2002, 124(4): 874―877.
[6]
Kazuyuki Y, Joichi S. Elastic deformation in thin film hydrodynamic lubrication [J]. Tribology International, 2013, 59(1): 170―180.
[7]
赵建华, 高殿荣, 张作超. 液体静压导轨定压供油式油腔承载力的超静定力学模型[J]. 机械工程学报, 2012, 48(22): 168―176. Zhao Jianhua, Gao Dianrong, Zhang Zuochao. Indeterminate mechanics model of bearing capacity of constant pressure oil pockets in hydrostatic slide [J]. Journal of Mechanical Engineering, 2012, 48(22): 168―176. ( in Chinese)
[8]
高殿荣, 赵建华, 张作超. 液体静压导轨单一导轨面内油腔数目的分析[J]. 工程力学, 2013, 30(4): 423―441. Gao Dianrong, Zhao Jianhua, Zhang Zuochao. Analysis of number of oil-pockets in one slide surface of liquid hydrostatic slide [J]. Engineering Mechanics, 2013, 30(4): 423―441. ( in Chinese)
[9]
赵永胜, 史霄, 董湘敏, 等. 重型数控机床静压转台承载能力分析[J]. 高技术通讯, 2013, 23(5): 540―545. Zhao Yongsheng, Shi Xiao, Dong Xiangmin, et al. Load capacity analysis for the hydrostatic rotary table of heavy duty CNC machine tools [J]. Chinese High Technology Letters, 2013, 23(5): 540―545. (in Chinese)
[10]
王新华, 郑秋月, 蔡力钢, 孙树文. 基于CFD的新型结构静压油垫数值仿真技术[J]. 北京工业大学学报, 2012, 38(1): 45―49. Wang Xinhua, Zheng Qiuyue, Cai Ligang, Sun Shuwen. Numerical simulation of the hydrostatic oil pad with a new structure based on CFD [J]. Journal of Beijing University of Technology, 2012, 38(1): 45―49. (in Chinese)
[11]
Dennis V, Douglas J. An isoviscous, isothermal model investigating the influence of hydrostatic recesses on a spring-supported tilting pad thrust bearing [J]. Tribology International, 2012, 51(1): 25―35.
[12]
Zuo Xiaobo, Wang Jianmin, Yin Ziqiang, Li Shengyi. Performance analysis of multirecess angled-surface slot-compensated conical hydrostatic bearing [J]. Journal of Tribology, 2013, 135(4): 1701―1711.
[13]
Chen Dongju, Fana Jinwei. Dynamic and static characteristics of a hydrostatic spindle for machine tools [J]. Manufacturing Systems, 2012, 31(1): 26―33.
[14]
赵建华, 高殿荣. 基于流量控制阀的液体静压导轨动态特性分析[J]. 中国机械工程, 2013, 24(4): 444―451. Zhao Jianhua, Gao Dianrong. Dynamic characteristics analysis of liquid hydrostatic slide based on flow control valve [J]. China Mechanical Engineering, 2013, 24(4): 444―451. (in Chinese)
[15]
叶红玲, 郑小龙, 沈静娴, 刘赵淼. 液体静压导轨转台轴向振动的动力学建模与分析[J]. 工程力学, 2012, 29(3): 218―225. Ye Hongling, Zheng Xiaolong, Shen Jingxian, Liu Zhaomiao. Dynamic modeling and analysis of axial vibration of the hydrostatic slide turntable [J]. Engineering Mechanics, 2012, 29(3): 218―225. (in Chinese)
[16]
史宝军, 季家东, 杨廷毅. 粗糙度模式对硬盘气膜承载特性的影响[J]. 工程力学, 2012, 29(8): 313―318. Shi Baojun, Ji Jiadong, Yang Tingyi. Effects of surface roughness modes on load carrying characteristics of air bearing films in hard disk drives [J]. Engineering Mechanics, 2012, 29(8): 313―318. (in Chinese)
[17]
陈燕生. 液体静压支承原理和设计[M]. 北京: 国防工业出版社, 1980: 36―40. Chen Yansheng. Theory and design of hydrostatic bearing [M]. Beijing: National Defence Industry Press, 1980: 36―40. (in Chinese)
