张子骞, 颜云辉, 杨会林. 薄壁管材矫直曲率半径数学模型及其验证[J]. 机械工程学报, 2013, 49(21): 160―167. Zhang Ziqian, Yan Yunhui, Yang Huilin. The straightening curvature-radius model for the thin-walled tube and its validation [J]. Journal of Mechanical Engineering, 2013, 49(21): 160―167. (in Chinese)
[2]
崔甫. 矫直原理与矫直机械[M]. 北京: 冶金工业出版社, 2002: 284. Cui Pu. Straightening theory and straightening machine [M]. Beijing: Metallurgical Industry Press, 2002: 284. (in Chinese)
[3]
Zhao Jun, Zhan Peipei, Ma Rui, ZHAI Ruixue. Control strategy of over-bending setting round for pipe-end of large pipes by mould press type method [J]. Transactions of Nonferrous Metals Society of China, 2012, 22(6): s329―s334.
[4]
毛佳, 江振宇, 陈广南, 等. 轴压薄壁加筋圆柱壳结构优化设计研究[J]. 工程力学, 2011, 28(8): 183―192. Mao Jia, Jiang Zhenyu, Chen Guangnan, et al. Design and optimization research on rib- stiffened thin cylindrical shell under axial loading [J]. Engineering Mechanics, 2011, 28(8): 183―192. (in Chinese)
[5]
Simmonds J G, Wan F Y M. An asymptotic analysis of the three-dimensional displacements and stresses in a spherical shell under inward radially opposed concentrated surface loads [J]. International Journal of Solids and Structures, 2001, 38(38/39): 6869―6887.
[6]
Liu J, Yang H, Li H W, et al. A new hybrid identification method for determining the material parameters of thin-walled tube under compressive stress state [J]. Materials & Design, 2013, 44(1): 49―58.
[7]
Wang Xingsong, Chen Xiaosong. Measuring radial pressure distributions of piston rings based on partial- thin-walled cylinder [J]. Measurement, 2010, 43(2): 197―203.
[8]
Zhang Ziqian, Yan Yunhui, Yang Huilin. A new stress mathematical model of deformation zone while straightening thin-walled tube [J]. Advanced Materials Researh, 2013, 653(2): 1488―1493.
[9]
Yu Tongxi, Zhang Liangchi. Plastic bending: Theory and application [M]. World Scientific Publishing Company Pricate Trading Enterprise Limited, 1996: 396.
[10]
何福保, 沈亚鹏. 板壳理论[M]. 西安: 西安交通大学出版社, 1993: 284―301. He Fubao, Shen Yapeng. Plate Theory [M]. Xi’an: Xi’an Jiaotong University Press, 1993: 284―301. (in Chinese)
