Song J S, Jerry Bowen. The internal pressure capacity of crescent-shaped wear casing [C]. New Orleans, Louisian, USA: SPE 23902, 1992: 547―549.
[2]
Yukihisa. Effect of wear and bending on casing collapse strength [C]. Washington, D C, USA: SPE 24597, 1992: 543―552.
[3]
覃成锦, 高德利, 徐秉业. 含磨损缺陷套管抗挤强度的数值分析[J]. 工程力学, 2001, 18(2): 9―13. Qin Chengjin, Gao Deli, Xu Bingye. Numerical analysis of collapse strength for casing with wear [J]. Engineering Mechanics, 2001, 18(2): 9―13. (in Chinese)
[4]
Wu J, Zhang M G. Casing Burst strength after casing wear [C]. Oklahoma, O K, USA: SPE 94304, 2005: 1―10.
[5]
Bradley W B. The effect of casing wear on the burst strength of casing statistical burst strength of worn casing strings [J]. Journal of Engineering for Industry, 1976(5): 686―694.
[6]
窦益华, 张福祥, 王维君, 等. 井下套管磨损深度及剩余强度分析[J]. 石油钻采工艺, 2007, 29(4): 36―37. Dou Yihua, Zhang Fuxiang, Wang Weijun, et al. Analysis on wear depth and residual strength of downhole casing [J]. Oil Drilling & Production Technology, 2007, 29(4): 36―37. (in Chinese)
[7]
王小增, 窦益华, 杨久红. 偏心磨损套管应力分布的双极坐标解答[J]. 石油钻探技术, 2006, 34(2): 18―19. Wang Xiaozeng, Dou Yihua, Yang Jiuhong. An analysis for the stress of worn casing with bipolar coordinates [J]. Petroleum Drilling Techniques, 2006, 34(2): 18―19. (in Chinese)
[8]
王小增, 杨久红, 窦益华. 套管磨损后剩余壁厚和剩余强度分析[J]. 石油钻探技术, 2008, 36(2): 14―16. Wang Xiaozeng, Yang Jiuhong, Dou Yihua. Analysis of casing remaining thickness and residual strength after wearing [J]. Petroleum Drilling Techniques, 2008, 36(2): 14―16. (in Chinese)
[9]
申昭熙, 冯耀荣, 谢学东, 等. 套管抗挤强度分析及计算[J]. 西南石油大学学报, 2008, 30(3): 139―142. Shen Zhaoxi, Feng Yaorong, Xie Xuedong, et al. Casing collapse resistance analys is and calculation [J]. Journal of Southwest Petroleum University, 2008, 30(3): 139―142. (in Chinese)
[10]
曾德智, 林元华, 施太和, 等. 磨损套管抗挤强度的新算法研究[J]. 天然气工业, 2005, 25(2): 78―80. Zeng Dezhi, Lin Yuanhua, Shi Taihe, et al. New algorithm of collapsing strengthof wearing casing [J]. Natural Gas Industry, 2005, 25(2): 78―80. (in Chinese)
[11]
廖华林, 管志川, 马广军, 等. 深井超深井磨损套管剩余强度计算[J]. 工程力学, 2010, 27(2): 251―252. Liao Hualin, Guan Zhichuan, Ma Guangjun, et al. Remaining strength calculation of internal wall worn casing in deep and ultra-deep wells [J]. Engineering Mechanics, 2010, 27(2): 251―252. (in Chinese)
[12]
Klever F J. Formulas for rupture, necking, and wrinkling of octg under combined loads [C]. San Antonio, Texas, USA: SPE 102585, 2006: 1―24.
[13]
Klever F J, Tamano T. A new OCTG strength equation for collapse under combined loads [C]. Houston, Texas, USA: SPE 90904, 2004: 1―11.
[14]
Tamano T. A new empirical equation for collapse resistance of commercial casing [J]. Energy Resources Technology, ASME, 1983, 43(5): 489―495.
[15]
杨永华, 吴杰. 单轴对称截面圆弧拱平面外稳定性研究[J]. 工程力学, 2012, 29(3): 27―32. Yang Yonghua, Wu Jie. Out of plane stability of mono- symmetric circular arches [J]. Engineering Mechanics, 2012, 29(3): 27―32. (in Chinese)
[16]
Pattlillo P D, Last N C, Asbill W T. Effect of nonuniform loading on conventional casing collapse resistance [C]. Amsterdam, the Netherlands: SPE 79871, 2003: 1―10.
[17]
Nester J H, Jenkins D R, Simon R. Resistances to failure of oil-well casing subjected to non-uniform transverse loading [J]. Prilling and Production Practice, 1956: 374―378.
[18]
A A H EI Sayed, Fouad Khalaf. Resistance of cemented concentric casing strings under nonuniform loading [J]. SPE Drilling Engineering, 1992, 7(1): 59―64.
[19]
Yeh Kaiyuan, Tang Renji, Zhen Jiqing. The bending of elastic circular ring of non-homogeneous and variable cross section under the action of arbitrary loads [J]. Applied Mathematic and Mechanics, 1981, 2(1): 1―14.
[20]
Chang Ming, Chang Lili. Analysis of the eccentric cylindrical thin shell [J]. Applied Mathematic and Mechanics, 1994, 15(9): 887―895.
[21]
A CH Yiannopoulous. A general formulation of stress distribution in cylinders subjected to non-uniform external pressure [J]. Journal of Elasticity, 1999, 56(3): 181―198.
[22]
Liang Erguo, Li Zifeng, Han Yong, et al. Analysis on collapse strength of casing wear [J]. Chinese Journal of Mechanical Engineering (English Edition), 2013, 26(3): 613―619.
