Bjerke T W, Zukas J A, Kimsey K D. Penetration performance of disk shaped penetrators [J]. International Journal of Impact Engineering, 1992, 12(2): 263―280.
[2]
Frank K, Zook J. Chunky metal penetrators act like constant mass penetrators [C]. San Antonio: TX, 1990: 441―449.
[3]
Scheffler D R. 2-D computer simulations of segmented penetrators impacting semi-infinite steel targets [J]. International Journal of Impact Engineering, 1990, 9(1): 35―43.
[4]
沈培辉, 王晓鸣, 赵国志. 分段杆侵彻增量分析[J]. 弹道学报, 1999, 11(4): 82―86. Shen Peihui, Wang Xiaoming, Zhao Guozhi. An analysis the penetration increment of the segmented rods [J]. Journal of Ballistics, 1999, 11(4): 82―86. (in Chinese)
[5]
王晓鸣, 赵国志, 沈培辉. 高速分段弹的侵彻模型[J]. 南京理工大学学报, 1997, 21(5): 445―448. Wang Xiaoming, Zhao Guozhi, Shen Peihui．A model for penetration of segmented rods with high velocities [J]. Journal of Nanjing University of Science and Technology, 1997, 21(5): 445―448. (in Chinese)
[6]
宋殿义, 刘飞, 蒋志刚. 刚性尖头弹侵彻圆柱形金属厚靶板分析模型[J]. 工程力学, 2013, 30(1): 31―36. Song Dianyi, Liu Fei, Jiang Zhigang. An analytical model for penetration into cylindrical metallic thick target by rigid sharp-nosed projectiles [J]. Engineering Mechanics, 2013, 30(1): 31―36. (in Chinese)
[7]
杜忠华, 朱建生, 王贤治. 异型侵彻体垂直侵彻半无限靶板的分析模型[J]. 兵工学报, 2009, 30(4): 403―407. Du Zhonghua, Zhu Jiansheng, Wang Xianzhi. Analytical model on non-circular penetrator impacting semi-infinite target perpendicularly [J]. Acta Armamentarii, 2009, 30(4): 403―407. (in Chinese)
[8]
Wen Heming, He Yu, Lan Bin. A combined numerical and theoretical study on the penetration of a jacketed rod into semi-infinite targets [J]. International Journal of Impact Engineering, 2011, 38(12): 1001―1010.
[9]
Veldanov V A, Fedorov S V, Maximov M A. Pentration of tube-like projectiles into metal targets [C]. New Orleans, 2008: 111―117.
[10]
Franzen R R, Schneidewind P N. Observations concerning the penetration mechanics of tubular hypervelocity penetrators [J]. International Journal of Impact Engineering, 1991, 11(3): 289―303.
[11]
Lee M. Cavity models for solid and hollow projectiles [J]. International Journal of Impact Engineering, 1991, 21(10): 881―894.
[12]
Lynch N J, Bless S J, Brissenden C. Novel KE penetrator performance against a steel/ceramic/steel target at over the velocity range 1800 to 2900m/s [J]. International Journal of Impact Engineering, 2001, 26(1): 475―486.
[13]
韩永要. 杆-管异形侵彻体侵彻机理研究[D]. 南京: 南京理工大学, 2005. Han Yongyao. Research on penetration mechanism of novel penetrator composed by rod and tube [D]. Nanjing: Nanjing University of Science and Technology, 2005. (in Chinese)
[14]
韩永要, 赵国志, 杜忠华. 固连接异性侵彻体侵彻威力研究[J]. 南京理工大学学报, 2005, 3(29): 270―273. Han Yongyao, Zhao Guozhi, Du Zhonghua. Performance of telescopic penetrator [J]. Journal of Nanjing University of Science and Technology, 2005, 3(29): 270―273. (in Chinese)
[15]
方清, 赵国志, 沈培辉, 韩永要. 圆管与圆杆组合体对半无限均质钢靶侵彻深度研究[J]. 兵工学报, 2005, 26(6): 929―732. Fang Qing, Zhao Guozhi, Shen Peihui, Han Yongyao. Study on penetration depth of circular tube and rod penetrator to homogeneous steel target [J]. Acta Armamentarii, 2005, 26(6): 929―732. (in Chinese)
[16]
方清. 伸缩式双弹芯动能侵彻体伸出结构研究[D]. 南京: 南京理工大学, 2005.
[17]
Fang Qing. Research on extended structure for telescopic KE projectile [D]. Nangjing: Nanjing University of Science and Technology, 2005. (in Chinese)
[18]
赵国志. 穿甲工程力学[M]. 北京: 兵器工业出版社, 1992: 86―107. Zhao Guozhi. Armour-piercing engineering mechanics [M]. Beijing: The Publishing House of Ordustry, 1992: 86―107. (in Chinese)
[19]
于庆波, 王海福, 俞为民. 结构参数对截锥弹低速正侵彻装甲靶的影响[J]. 工程力学, 2012, 29(1): 207―213. Yu Qingbo, Wang Haifu, Yu Weimin. Influence of structural parameters on perpendicular penetrating armor of truncated conical projectile in low speed [J]. Engineering Mechanics, 2012, 29(1): 207―213. (in Chinese)
[20]
Tate A. Engineering modelling of some aspects of segmented rod penetration [J]. International Journal of Impact Engineering, 1990, 9(3): 327―341.
