Shariyat M, Nikkhah M, Kazemi R. Exact and numerical elastodynamic solutions for thick-walled functionally graded cylinders subjected to pressure shocks [J]. International Journal of Pressure Vessels and Piping, 2011, 88(2/3): 75―87.
[2]
Zhao Junhai, Zhai Yue, Ji Lin, et al. Unified solutions to the limit load of thick-walled vessels [J]. Journal of Pressure Vessel Technology, 2007, 129(1): 670―675.
[3]
陈勇军, 郑津洋, 邓贵德, 等. 单层厚壁圆筒弹性动应力的简化计算方法[J]. 工程力学, 2006, 23(11): 45―51. Chen Yongjun, Zheng Jinyang, Deng Guide, et al. A simplified method for calculating elastodynamic stresses of monobloc thick-walled cylinder [J]. Engineering Mechanics, 2006, 23(11): 45―51. (in Chinese)
[4]
钱凌云, 刘全坤, 韩豫, 等. 基于双线性强化模型的挤压凹模自增强技术研究[J]. 机械工程学报, 2011, 47(12): 26―31. Qian Lingyun, Liu Quankun, Han Yu, et al. Research on autofrettage technology for extrusion die based on bilinear hardening model [J]. Journal of Mechanical Engineering, 2011, 47(12): 26―31. (in Chinese)
Gao Yongtao, Wu Qingliang, Lü Aizhong. Stress analytic solution of a double-layered thick-walled cylinder with smooth contact interface subjected to a type of non-uniform distributed pressures [J]. Engineering Mechanics, 2013, 30(10): 93―99. (in Chinese)
[7]
李鹏飞, 张顶立, 赵勇, 等. 海底隧道复合衬砌水压力分布规律及合理注浆加固圈参数研究[J]. 岩石力学与工程学报, 2012, 31(2): 280―288. Li Pengfei,Zhang Dingli, Zhao Yong, et al. Study of distribution law of water pressure action on composite lining and reasonable parameters of grouting circle for subsea tunnel [J]. Chinese Journal of Rock Mechanics and Engineering, 2012, 31(2): 280―288. (in Chinese)
[8]
殷有泉, 陈朝伟. 软化材料厚壁筒的解析解及其稳定性分析[J]. 力学学报, 2010, 42(1): 56―64. Yin Youquan, Chen Zhaowei. The analytical solutions of thick-walled cylinder of softening material and its stability [J]. Chinese Journal of Theoretical and Applied Mechanics, 2010, 42(1): 56―64. (in Chinese)
Luo Zhonghua, Zhang Zhiliang. Optimum design of multi-layer press-fit composite cold extrusion concave die [J]. Journal of Plasticity Engineering, 2003, 10(4): 38―41. (in Chinese)
[11]
Ni Xinhua, Liu Xiequan, Liu Yunting. Calculation of ultimate loads and stable loads of strength-differential thick cylinders by the twin shear strength theory[C]// Wen T D. Proceedings of the 4th International Symposium on Test and Measurement. Shanghai: International Academic Publishers, 2001: 1102―1104.
[12]
付衣铭, 熊惠而. 松套圆筒自增强分析[J]. 湖南大学学报, 1984, 11(4): 84―94. Fu Yiming, Xiong Huier. Analysis of prestressing loose running fit cylinder [J]. Journal of Hunan University, 1984, 11(4): 84―94. (in Chinese)
[13]
袁格侠, 刘宏昭, 赵迎祥, 等. 双层缩套厚壁筒自增强残余应力分析[J]. 中国机械工程, 2012, 23(11): 1364―1368. Yuan Gexia, Liu Hongzhao, Zhao Yingxiang, et al. Analysis of autofrettaged residual stress of shrink-fit two-layer thick-wall cylinders [J]. China Mechanical Engineering, 2012, 23(11): 1364―1368. (in Chinese)
[14]
张常光, 赵均海, 孙珊珊. 隧道围岩弹-脆-塑性应力的三剪统一解[J]. 应用力学学报, 2012, 29(5): 530―534. Zhang Changguang, Zhao Junhai, Sun Shanshan. An analytical solution for tunnel stress in an elastic-brittle-plastic rock based on the triple-shear unified strength criterion [J]. Chinese Journal of Applied Mechanics, 2012, 29(5): 530―534. (in Chinese)
[15]
胡小荣, 俞茂宏. 三剪强度准则及其在巷道围岩弹塑性分析中的应用[J]. 煤炭学报, 2003, 28(4): 389―393. Hu Xiaorong, Yu Maohong. New tri-shear failure criterion and its application in elasto-plastic analysis for the wall rock of tunnel [J]. Journal of China Coal Society, 2003, 28(4): 389―393. (in Chinese)
[16]
胡小荣, 樊晓梅. 三剪统一强度准则在碎石桩复合地基承载特性分析中的应用[J]. 南昌大学学报(工科版), 2012, 34(1): 22―27. Hu Xiaorong, Fan Xiaomei. Application of the triple-shear unified failure criterion to the bearing performances of the gravel pile composite foundation [J]. Journal of Nanchang University (Engineering & Technology), 2012, 34(1): 22―27. (in Chinese)
[17]
Yu Maohong, Li Jianchun, Zhang Yongqiang. Unified characteristic line theory of spacial axisymmetric plastic problem [J]. Science in China: Series E, 2001, 44(2): 207―215.
[18]
Zhang Changguang, Zhang Qinghe, Zhao Junhai, et al. Unified analytical solutions for a circular opening based on non-linear unified failure criterion [J]. Journal of Zhejiang University-Science A, 2010, 11(2): 71―79.
[19]
徐秉业, 刘信声. 应用弹塑性力学[M]. 北京: 清华大学出版社, 1995: 184―191. Xu Bingye, Liu Xinsheng. Application of Elastic-Plastic Mechanics [M]. Beijing: Tsinghua University Press, 1995: 184―191. (in Chinese)
[20]
Zhang Qiang, Jiang BinSong, Wang Shuilin, et al. Elasto-plastic analysis of a circular opening in strain-softening rock mass [J]. International Journal of Rock Mechanics & Mining Sciences, 2012, 50(2): 38―46.
Hu Xiaorong, Lin Taiqing. Triple-shear yield criterion and its applications to limit pressures for thin and thick wall cylinders and thick wall spherical shells [J]. The Chinese Journal of Nonferrous Metals, 2007, 17(2): 208―215. (in Chinese)
[23]
张常光, 张庆贺, 赵均海. 考虑应变软化及剪胀的井壁稳定统一解[J]. 煤炭学报, 2009, 34(5): 634―639. Zhang Changguang, Zhang Qinghe, Zhao Junhai. Unified solutions of well-bore stability considering strain softening and shear dilation [J]. Journal of China Coal Society, 2009, 34(5): 634―639. (in Chinese)
