郝际平, 潘秀珍, 等. 基于节点连接特性的钢板剪力墙结构数值分析[J]. 工程力学, 2013, 30(8): 193―198. Guo Hongchao, Hao Jiping, Pan Xiuzhen, et al. Computational analysis for steel-plate shear wall based on the node connection characteristics [J]. Engineering Mechanics, 2013, 30(8): 193―198. (in Chinese)
[2]
341-10, Seismic Provisions for Structural Steel Buildings [S]. Chicago Illinois: American Institute of Steel Construction, 2010.
[3]
L J, Kulak G L, Montgomery C J. Analysis of steel plate shear walls [R]. Structural Engineering Report No.107, Canada: University of Alberta, 1983.
[4]
P A, Kulak G L. Experimental study of steel plate shear walls [R]. Structural Engineering Report No.114, Canada: University of Alberta, 1983.
[5]
H. Flat Sheet Metal Girders with Very Thin Webs(Part III): Sheet Metal Girders with Spars Resistant to Bending-The Stress in Uprights- Diagonal Tension Fields [R], Washington D C: Technical Memorandum No. 606, NACA, 1931.
[6]
P, Peterson J P, Levin L R. A Summary of Diagonal Tension(Part I): Methods and Analysis [R]. Washington D C: Technical Note 2661 NACA, 1952.
[7]
Limit States Design of Steel Structures [S]. Mississauga, Ontario, Canada: Canadian Standards Association (CSA), 2001.
[8]
Recommended Provisions for Seismic Regulations for New Buildings and Other Structures (FEMA 450) [M]. Washington D C: Building Seismic Safety Council for the Federal Emergency Management Agency, 2004: 155―157.
[9]
A S, Prion H G L, Ventura C E, Rezai M. Unstiffened steel plate shear wall performance under cyclic loading [J]. Journal of Structural Engineering, 2005, 126(4): 453―460.
[10]
J W, Bruneau M. Experimental investigation of light-gauge steel plate shear walls [J]. ASCE, Journal of Structural Engineering, 2005, 131(2): 259―267.
[11]
R G, Kulak G L, Kennedy D J L, Elwi A E. Cyclic test of a four-story steel plate shear wall [J]. ASCE, Journal of Structural Engineering, 1998, 124(2): 112―120.
[12]
H G, Kwack J H, Jeon S W, Kim W K, Choi I R. Framed steel plate wall behavior under cyclic lateral loading [J]. ASCE, Journal of Structural Engineering, 2007, 133(3): 378―388.
[13]
B, Bruneau M, Lin C H. Tsai K C, Testing of full scale two-story steel plate shear walls with RBS connections and composite floor [J]. ASCE, Journal of Structural Engineering, 2008, 134(3): 364―373.
[14]
C H, Tsai K C. Experimental response of four 2-story narrow steel plate shear walls [C]. Vancouver BC Canada: Proceedings of the Structure Congress, 2008: 1―10.
[15]
郭彦林, 范珍, 等. 钢板剪力墙低周反复荷载试验研究 [J]. 建筑结构学报, 2004, 25(2): 19―26. Chen Guodong, Guo Yanlin, Fan Zhen, et al. Cyclic test of steel plate shear walls [J]. Journal of Building Structures, 2004, 25(2): 19―26. (in Chinese)
[16]
郝际平, 潘秀珍, 等. 四角钢连接钢框架-钢板剪力墙结构抗震性能研究[J]. 建筑结构学报, 2013, 34(1): 70―75. Guo Hongchao, Hao Jiping, Pan Xiuzhen, et al. Seismic behavior of four-angle-connection steel frame structure with steel plate shear walls [J]. Journal of Building Structures, 2013, 34(1): 70―75. (in Chinese)
[17]
R, Bruneau M. Steel plate shear walls (AISC Design Guide) [M]. American Institute of Steel Construction, Chicago, Illinois, 2007: 38―41.
[18]
S P. Theory of Elastic Stability [M]. New York: McGraw-Hill International book company, 1985: 100―107.
