全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
工程力学  2014 

螺栓杆应力集中系数的研究

DOI: 10.6052/j.issn.1000-4750.2013.05.0389, PP. 174-180

Keywords: 应力集中,系数,螺栓,数值计算,迭代

Full-Text   Cite this paper   Add to My Lib

Abstract:

螺栓球节点栓杆上的应力集中是导致栓杆发生疲劳破坏的主要原因。该文通过理论推导及数值分析的方法研究了螺栓杆的应力集中系数。在忽略螺纹升角的情况下,根据变形协调条件研究了螺栓杆的轴力梯度变化,采用数值计算确定常用螺栓球的螺纹位移系数及螺纹力计算公式。采用局部建模,通过迭代计算的方法确定螺栓杆应力集中系数。与完整模型的计算结果比较表明该方法的计算结果具有较高的精度,且计算效率高。

References

[1]  Lei Honggang, Dong Chao, Pei Yan. The testing research on equal-amplitude fatigue behavior of large-span grid structures [C]. Beijing: Seismological Prees, 2001: 962-966.
[2]  Lei Honggang. The expert treatment system of fatigue loading spectrum for large-span grid structures [C]. Beijing: Seismological Press, 2001: 944-949.
[3]  桂国庆, 余长征, 潘际炎, 张玉玲, 张建民. 钢桥钢梁整体节点疲劳试验研究[J]. 工程力学, 2001, 18(4): 38-44. Gui Guoqing, Yu Changzheng, Pan Jiyan, Zhang Lingyu, Zhang Jianmin.Experimental research on fatigue of beam joints of steel bridges [J]. Engineering Mechanics, 2001, 18(4): 38-44. (in Chinese)
[4]  黄学伟, 蔡力勋, 包陈, 陈龙. 基于低周疲劳损伤的裂纹扩展行为数值模拟新方法[J]. 工程力学, 2011, 28(10): 202-208. Huang Xuewei, Cai Lixun, Bao Chen, Chen Long.A new method of Numerical simulation for behavior of fatigue crack propagation based on low cycle fatigue damage [J]. Engineering Mechanics, 2011, 28(10): 202-208. (in Chinese)
[5]  刘丽君. 钢网架螺栓球节点用高强螺栓的缺口效应分析[J]. 厦门大学学报, 2005, 44(4): 783-786. Liu Lijun. On the notch effects of high strength bolt in grid structures with bolt-sphere joints [J]. Journal of Xiamen University, 2005, 44(4): 783-786. (in Chinese)
[6]  郑慧敏. 网架螺栓球节点的应力集中分析[D]. 太原: 太原理工大学, 2008. Zheng Huiming. Analysis Of concentration with bolt-sphere joints [D]. Taiyuan: Taiyuan University of Technology, 2008. (in Chinese)
[7]  雷宏刚, 裴艳, 刘丽君. 高强度螺栓疲劳缺口系数的有限元分析[J]. 工程力学, 2008, 25(增刊I): 49-53. Lei Honggang, Pei Yan, Liu Lijun. FEA Analysis of fatigue notch coefficients for high-strength bolts [J]. Engineering Mechanics, 2008, 25(Suppl I): 49-53. (in Chinese)
[8]  孙巍巍, 任志浩, 孟少平. 交错孔洞平板螺栓连接受拉分析模型研究[J]. 工程力学, 2009, 26(7): 176-180. Sun Weiwei, Yam C H Michael, Meng Shaoping. An investigation on the tension analytical model of steel plate with staggered bolt holes [J]. Engineering Mechanics, 2009, 26(7): 176-180. (in Chinese)
[9]  沈国辉, 陈震, 郭勇, 邢月龙, 潘峰, 孙炳楠. 螺栓节点板抗剪连接的有限元模拟方法研究[J]. 工程力学, 2013, 30(1): 119-125. Shen Guohui, Chen Zhen, Guo Yong, Xing Yuelong, Pan Feng, Sun Bingnan. Finite element simulation methods applied to bolted gusset plates used as shear connectors [J]. Engineering Mechanics, 2013, 30(1): 119-125. (in Chinese)
[10]  陈跃良, 卞贵学, 郁大照. 预腐蚀铝合金典型螺栓单搭接件疲劳寿命研究[J]. 工程力学, 2012, 29(5): 251-256. Chen Yueliang, Bian Guixue, Yu Dazhao. Study on fatigue life of pre-corroded aluminum alloy typical single bolted lap jionts [J]. Engineering Mechanics, 2012, 29(5): 251-256. (in Chinese)
[11]  JGJ 7-91, 网架结构设计与施工规程[S]. 北京: 中国建筑工业出版社, 1991. JGJ 7-91, Technical specification of spatial structure design and construction [S]. Beijing: China Architecture Industry Press, 1991. (in Chinese)
[12]  雷宏刚. 螺栓球节点网架常幅疲劳试验数据再分析[C]. 钢结构工程研究(三)——中国钢结构协会结构稳定与疲劳分会2000年学术交流会论文集, 长沙: 中国钢结构协会结构稳定与疲劳分会, 2000: 202-205. Lei Honggang. Bolt ball node network frame often amplitude fatigue test data and analysis [C]. Steel Structure Engineering Research (3) China Steel Structure Association Structure Stability and Fatigue Branch 2000 Academic Conference Proceedings, Changsha: China Steel Structure Association Structure Stability and Fatigue, 2000: 202-205. (in Chinese)
[13]  冯秀娟, 黄炳生, 林醒山. 网架悬挂吊车吊点的疲劳性能试验研究[J]. 东南大学学报, 1994, 24(3): 99-105. Feng Xiujuan, Huang Bingsheng, Lin Xingshan. Experimental study on fatigue characteristics of suspender connecting the crane rails to the space grids [J]. Journal of Southeast University, 1994, 24(3): 99-105. (in Chinese)
[14]  冯秀娟, 林醒山, 潘文, 等. 在悬挂吊车作用下螺栓球节点网架的疲劳性能[J]. 建筑结构学报, 1995, 16(4): 3-12. Feng Xiujuan, Lin Xingshan, Pan Wen, et al. Fatigue behavior of space grid with bolt sphere joints under suspended crane loading [J]. Journal of Building Structures, 1995, 16(4): 3-12. (in Chinese)
[15]  GB/T 16939-1997, 钢网架螺栓球节点用高强度螺栓[S]. 北京: 中国标准出版社, 1997. GB/T 16939-1997, High strength bolts for joints of space grid structures [S]. Beijing: China Standard, 1997. (in Chinese)
[16]  GB 197-81, 普通螺纹公差与配合[S]. 北京: 中国标准出版社, 1981. GB 197-81, The tolerance and adaptation of common screws [S]. Beijing: China Standards, 1981. (in Chinese)

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133