GB50017-2003, Code for design of steel structures [S]. 2003. (in Chinese)
[2]
包世华. 新编高层建筑结构[M]. 北京: 中国水利水电出版社, 2005: 110―130.
[3]
Bao Shihua. Tall building structures [M]. Beijing: China Water Power Press, 2005: 110―130. (in Chinese)
[4]
Fujimoto M, Wada A, Saeki E, et al. A study on the unbonded brace encased in buckling-restraining concrete and steel tube [J]. Journal of Structural and Construction Engineering, AIJ, 1988, 34B: 249―258. (in Japanese)
[5]
Kimura K, Yoshioka K, Takeda T, et al. Tests on braces encased by mortar in-filled steel tubes [C]// Summaries of Technical Papers of Annual Meeting of the Architectural Institute of Japan. Structural Engineering Section, Tokyo, Japan, 1976: 1041―1042. (in Japanese)
Guo Yanlin, Wang Xiaoan. Study on restrain stiffness of a four-angle assembled steel buckling-restrained brace [J]. China Civil Engineering Journal, 2012, 45(11): 79―87. (in Chinese)
Guo Yanlin, Jiang Leixin. Behavior and application of buckling-restrained braces assembled with section steels [J]. Building Structure, 2010, 40(1): 30―37. (in Chinese)
[11]
江磊鑫. 装配式防屈曲耗能支撑构件设计方法研究[D]. 北京: 清华大学, 2010.
[12]
Jiang Leixin. Research on the design methods of assembled buckling-restrained braces [D]. Beijing: Tsinghua University, 2010. (in Chinese)
[13]
陈绍蕃. 门式刚架端板螺栓连接的强度和刚度[J]. 钢结构. 2000, 15(1): 6―11.
[14]
Chen Shaofan. The Strength and stiffness of bolt end-plate connection in portal frames [J]. Steel Construction, 2000, 15(1): 6―11. (in Chinese)
[15]
Wang X A, Guo Y L, Tian G Y, et al. A design method for a new type of assembled steel buckling-restrained braces [C]// Proceeding of Seventh International Conference on Advances in Steel Structures, Nanjing, China: 2012: 1042―1049.
