Pizhong Qiao, Maosen Cao. Waveform fractal dimension for mode shape-based damage identification of beam-type structures [J]. International Journal of Solids and Structures, 2008, 45: 5946―5961.
[2]
Maosen Cao, PizhongQiao. Novel Laplacian scheme and multiresolution modal curvatures for structural damage identification [J]. Mechanical Systems and Signal Processing, 2009, 23: 1223―1242.
[3]
Dang Xiaojuan, Yang Zhichun, Tan Guanghui, Wang Le. Statistic detection for composite laminate damage by application of correlation function amplitude vector method [J]. Engineering Mechanics, 2009, 26(3): 218―223, 256. (in Chinese)
Yu Zhefeng, Yang Zhichun. Structural damage detection with random excitation and correlation function amplitude vector [J]. Journal of Vibration and Shock, 2006, 25(3): 77―80. (in Chinese)
Zhang Muyu, Yang Zhichun, Wang Le, Ding Yan. Damage locating for composite beam structure by cross correlation analysis without reference node [J]. Engineering Mechanics, 2011, 28(11): 166―169. (in Chinese)
Guo Xinglin, Gao Haiyang, Wang Shenghui. A multi-step decision method for damage detection based on frequency response curvature [J]. Engineering Mechanics, 2012, 29(7): 56―62, 83. (in Chinese)
Hou Jilin, Ou Jinping, Łukasz Jankowski. The experiment of substructure isolation and Identification using local time series [J]. Engineering Mechanics, 2013, 30(4): 129―135. (in Chinese)
Wang Liheng. Study on low-velocity impact strain measurement of composite laminate plate and its health monitoring using fiber bragg grating sensors [J]. Piezoelectrics & Acoustooptics, 2012, 34(4): 509―514. (in Chinese)
Cheng Xiaoquan, Li Zhengneng. Damage progressive model of compression of compositelaminates after low velocity impact [J]. Applied Mathematics and Mechanics, 2005, 26(5): 569―576. (in Chinese)
Cheng Xiaoquan, Wu Xueren. Methods for improving damage tolerance of composite laminates after low velocity impact and their influence factors [J]. Polymer Materials Science and Engineering, 2002, 18(3): 20―25. (in Chinese)
Lin Zhiyu, Xu Xiwu. Residual compressive strength of stiffened composite laminates with impact damage [J]. Acta Aeronautica et Astronautica Sinica, 2009, 30(1): 56―61. (in Chinese)
[24]
Hanno Niemann, Joseph Morlier, Amir Shahdin, Yves Gourinat. Damage localization using experimental modal parameters and topology optimization [J]. Mechanical Systems and Signal Processing, 2010, 24: 636―652.
Liu Fulin, Yan Weiming, He Haoxiang, Wang Zhuo. Mode shape characterization and damage detection in latticed shell structures based on Zernike moments [J]. Engineering Mechanics, 2013, 30(8): 1―9. (in Chinese)
[27]
Grouve W J B, Warnet L L, de Boer A, Akkerman R, Vlekken J. Delamination detection with fibre Bragg gratings based on dynamic behavior [J]. Compos Sci Technol, 2008, 68(12): 2418―2424.
[28]
Curadelli R O, Riera J D, Ambrosini D, Amani M G. Damage detection by means of structural damping identification [J]. Engineering Structures, 2008, 30: 3497―3504.
[29]
Manoj Kumar, Shenoi R A, Cox S J. Experimental validation of modal strain energies based damage identification method for a composite sandwich beam [J]. Composites Science and Technology, 2009, 69: 1635―1643.
[30]
Edwin Reynders, Guido De Roeck. A local flexibility method for vibration-based damage localization and quantification [J]. Journal of Sound and Vibration, 2010, 329: 2367―2383.
[31]
Maeck J, DeRoeck G. Dynamic bending and torsion stiffness derivation from modal curvatures and torsion rates [J]. Journal of Sound and Vibration 1999, 225: 153―170.
Wang Liheng, Zhou Xiyuan, Yan Weiming. Experimental studies on monitoring reinforced concrete beamps damage degree using responses maximums in impact excitation vibration tests [J]. Journal of Vibration and Shock, 2006, 25(1): 90―94. (in Chinese)
[34]
Liheng Wang, Xiyuan Zhou, He Liu, Weiming Yan. Damage detection of RC beams based on experiment and analysis of nonlinear dynamic characteristics [J]. Constructions and Building Materials, 2012, 29: 420―427.
[35]
Ning Hu, Takahito Shimomukai, Cheng Yan, Hisao Fukunaga. Identification of delamination position in cross-ply laminatedcomposite beams using S0 Lamb mode [J]. Composites Science and Technology, 2008, 68: 1548―1554.
