Low H Y, Hao H. Reliability analysis of reinforced concrete slabs under explosive loading [J]. Structure Safety, 2001, 23(2): 157―178.
[2]
Bogosian D, Feritto J, Shi Y J. Measuring uncertainty and conservatism in simplified blast models [C]// Proceedings of the 30th Explosive Safety Seminar. Atlanta, Georgia USA, 2002: 2―8.
[3]
Ishikawa N, Beppu M. Lessons from past explosive tests on protective structures in Japan [J]. International Journal of Impact Engineering, 2007, 34(9): 1535―1545.
[4]
Smith P D, Rose T A. Blast wave propagation in city streets—an overview [J]. Progress in Structural Engineering and Materials, 2006, 8(1): 16―28.
[5]
Remennikov A M, Rose T A. Modeling blast loads on buildings in complex city geometries [J]. Computers and Structures, 2005, 83(27): 2197―2205.
[6]
Smith P D, Hetherington J. Blast and ballistic loading of structures [M]. London: Butterworth-Heinemann Ltd, 1994: 17―21.
[7]
Baker W E, Cox P A, Westine P S, et al. Explosion hazards and evaluation [M]. Amsterdam: Elsevier, 1983: 55.
[8]
Kingery C N, Bulmash G. Air-blast parameters from TNT spherical air burst and hemispherical surface burst [R]. Aberdeen Maryland USA,US Army Ballistic Research Laboratory, 1984.
[9]
Nassr A A, Razaqpur A G, Tait M T, et al. Single and multi degree of freedom analysis of steel beams under blast loading [J]. Nuclear and Design, 2012, 242(1): 63―77.
[10]
Biggs J M. Introduction to structural dynamics [M]. New York: McGraw-Hill Book Company, 1964: 23―32.
[11]
Chopra A K. Dynamics of structure: Theory and applications to earthquake engineering [M]. New Jersey: Prentice Hall, 2011: 58.
Chen Mingxiong, Song Chunming, Wang Mingyang. Analytical solution of RC beam system under explosion loading [J]. Engineering Mechanics, 2010, 27(4): 73―78. (in Chinese)
[14]
Arafah A M. Statistics for concrete and steel quality in saudi arabia [J]. Magazine of Concrete Research, 1997, 49(180): 85―93.
Mi Heng. Research in the reliability of composite steel-concrete beam bridge based on Mote Carlo method [D]. Xi’an: Chang’an University, 2009. (in Chinese)
[17]
Ma G W, Shi H J, Shu D W. P-I diagram method for combined failure modes of rigid-plastic beams [J]. International Journal of Impact Engineering, 2007, 34(6): 1081―1094.
[18]
Hao H, Stewart M G, Li Z X, et al. RC column failure probabilities to blast loads [J]. International Journal of Protective Structures, 2010, 1(4): 571―591.
[19]
Low H Y, Hao H. Reliability analysis of direct shear and flexural failure modes of RC slabs under explosive loading [J]. International Journal of Engineering Structures, 2002, 24(2): 189―198.
[20]
Stewart M G, Netherton M D. Blast reliability curves and uncertainty modeling for glazing subject to explosive blast loading [C]// Proceedings of the 6th Asian-Pacific Conference on Shock and Impact Loads on Structures. Perth Australia, 2005: 523―530.
[21]
UFC3-340-02. Structures to resist the effects of accidental explosions [S]. December, 2008: 65, 266.
[22]
Brode H L. Blast wave from a spherical charge [J]. Physics of Fluids, 1959, 2(2): 217.
[23]
Henrych J. The dynamics of explosion and its use [M]. Amsterdam: Elsevier, 1979: 71―92.
[24]
Mills C A. The design of concrete structures to resist explosions and weapon effect [C]// Proceedings of the 1st International Conference for Hazard Protection. Edinburgh, UK, 1987: 18―25.
[25]
Wu C Q, Hao H. Modeling of simultaneous ground shock and air blast pressure on nearby structures from surface explosions [J]. International Journal of Impact Engineering, 2005, 31(6): 699―717.
[26]
Fahmy A, Tolba F. Response of the Frp-retrofitted reinforced concrete panels to blast loading [D]. Canada: Carleton University, 2001.
Mu Chaomin, Ren Huiqi, Li Yongchi, et al. Experimental study of blast wave reflection and diffraction on a shelter wall [J]. Journal of Experimental Mechanics, 2008, 23(2): 169―174. (in Chinese)
[29]
Rose T A, Smith P D, May J H. The interaction of oblique blast waves with buildings [J]. Shock Waves, 2006, 16(1): 35―44.
[30]
Formby S A, Wharton R K. Blast characteristics and TNT equivalence values for some commercial explosives detonated at ground level [J]. Journal of Hazardous Materials, 1996, 50(2/3): 183―198.
[31]
Jacinto A C, Ambrosini R D, Danesi R F. Experimental and computational analysis of plates under air blast loading [J]. International Journal of Impact Engineering, 2001, 25(10): 927―947.
[32]
Clutter J K, Mathis J T, Stahl M C. Modeling environmental effects in the simulation of explosion events [J]. International Journal of Impact Engineering, 2007, 34(5): 973―989.
[33]
Schenker A, Anteby I, Gal E, et al. Full-scale field tests of concrete slabs subjected to blast loads [J]. International Journal of Impact Engineering, 2008, 35(3): 184―198.
[34]
Borenstein E, Benaroya H. Sensitivity analysis of blast loading parameters and their trends as uncertainty increases [J]. Journal of Sound and Vibration, 2009, 21(3): 762―785.
[35]
Chapman T C, Rose T A, Smith P D. Blast wave simulation using AUTODYN2D. [J]. International Journal of Impact Engineering, 1995, 16(5/6): 777―787.
[36]
Smith P D, Rose T A. Blast loading and building robustness [J]. Progress in Structural Engineering and Materials, 2002, 4(2): 213―223.
