Mohamed K, Paraschivoiu M. Real gas simulation of hydrogen release from a high-pressure chamber [J]. International Journal of Hydrogen Energy, 2005, 30(8): 903-912.
[2]
Dicken C J B, Merida W. Measured effects of filling time and initial mass on the temperature distribution within a hydrogen cylinder during refueling [J]. Journal of Power Sources, 2007, 17(165): 324-336.
[3]
Dichen C J B, Merida W. Modeling the transient temperature distribution within a hydrogen cylinder during refueling [J]. Numerical Heat Transfer, Part A, 2008, 53(7): 1-24.
[4]
Sitra P, Frédéric B, Laurent A, Katia B. Hydrogen refueling station: filling control protocols development [J]. World Hydrogen Energy Conference 16th, 2006, 13(16): 1-8.
[5]
刘昊, 陶国良. 气动汽车快速加气站加气过程研究[J]. 中国机械工程, 2007, 18(3): 369-373. Liu Hao, Tao Guoliang. Study on air charging process of quick recharge station for air powered vehicle [J]. China Mechanical Engineering, 2007, 18(3): 369-373. (in Chinese)
[6]
安刚. 车载储氢气瓶快速充气分析[J]. 导弹与航天运载技术, 2009, 301(3): 50-55. An Gang. Numerical analysis of fast-filling process of hydrogen storage cylinder for vehicles [J]. Missiles and Space Vehicles, 2009, 301(3): 50-55. (in Chinese)
[7]
Liss W E, Richards M E, Kountz K, Kriha K. Development and validation testing of hydrogen fast-fill fueling algorithms [J]. World Hydrogen Energy Conference 15th, 2004, 15(16): 1-5.
[8]
Zhao L, Liu Y L, Yang J, et al. Numerical simulation of temperature rise within hydrogen vehicle cylinder [J]. International Journal of Hydrogen Energy, 2010, 35(15): 8092-8100.
[9]
Liu Y L, Zhao Y Z, Zhao L, et al. Experimental studies on temperature rise within a hydrogen cylinder during refueling [J]. International Journal of Hydrogen Energy, 2010, 35(7): 2627-2632.
[10]
Ansys Inc. Fluent 13.0 User’s Guide [DB]. 2010: Ansys 13.0.
[11]
Liu Y L, Zhao Y Z, Zhao L, et al. Experimental studies on temperature rise within a hydrogen cylinder during refueling [J]. International Journal of Hydrogen Energy, 2010, 35(7): 2627-2632.
[12]
Zhao L, Liu Y L, Yang J, et al. Numerical simulation of temperature rise within hydrogen vehicle cylinder [J]. International Journal of Hydrogen Energy, 2010, 35(15): 8092-8100.
[13]
李勇, 刘志友, 安亦然. 介绍计算流体力学通用软件- Fluent [J]. 水动力学研究与进展, 2001, 16(2): 254-258. Li Yong, Liu Zhiyou, An Yiran. A brief introduction to Fluent—A general purpose CFD code [J]. Journal of Hydrodynamics, 2001, 16(2): 254-258. (in Chinese)
[14]
Zheng J Y, Ye J J, Yang J, Tang P, Zhao L, Kern M. An optimized control method for a high utilization ratio and fast filling speed in hydrogen refueling stations [J]. International Journal of Hydrogen Energy, 2010, 35(7): 3011-3017.
[15]
周海成, 阮海东. 纤维缠绕复合材料气瓶的发展及其标准情况[J]. 压力容器, 2004, 21(9): 32-36. Zhou Haicheng, Ruan Haidong. Development of filament wound composite gas cylinder and its standard condition [J]. Pressure Vessel , 2004, 21(9): 32-36. (in Chinese)
[16]
黄伯云, 李成功, 石力开, 邱冠周, 左铁镛. 中国材料工程大典(第4卷): 有色金属材料工程[M]. 北京: 化学工业出版社, 2006: 760-836. Huang Boyun, Li Chenggong, Shi Likai, Qiu Guanzhou, Zuo Tieyong. China materials engineering canon [M]. Beijing: Publishing House of Chemist Industry, 2006: 760-836. (in Chinese)
